Solera RV Slide-Out Awning - 109" Wide - Black
(1106 reviews)
Price: $480.13
Solera RV Slide-Out Awning - 109" Wide - Black
Item # LCV000168325
Retail:$680.37
Our Price: $480.13
You Save: $200.24
- All Info
- Reviews (1106)
- Q & A (0)
- Photos
Lippert RV Awnings - LCV000168325
- Slide-Out Awnings
- 104 Inch Wide
- 105 Inch Wide
- 106 Inch Wide
- 107 Inch Wide
- 108 Inch Wide
- 109 Inch Wide
- Black
- Extends 48 Inches
- Lippert
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 9'1" from edge to edge. Includes all necessary components.
Features:
- Protects your RV slide-out from damage from clogging leaves, debris, and pooling water
- Prevents water damage and mildew
- Blocks out sun to help keep the RV cool
- Extends and retracts with your slide-out automatically
- Made of heavy-duty, durable fabric with premium 13.5-oz vinyl
- Won't crack in cold temperatures
- Prevents leaks with heat-welded seams
- Includes brackets, hardware, and awning rail
- Black awning fabric matches black hardware
- Made in the USA
Specs:
- Application: slide-outs 104" - 109" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 109" long
- Awning fabric (when fully extended): 109" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000168325 Lippert Solera 9'1" Slider (Slide-Topper) in Black w/ Black Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Customer Reviews
Solera RV Slide-Out Awning - 109" Wide - Black - LCV000168325
Average Customer Rating: 4.6 out of 5 stars (1106 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 9'1" from edge to edge. Includes all necessary components.by: James 05/10/2023
Matt B was very helpful in ordering the right size for our camper slideout. the package arrived on time. we were able to install it ourselves with the instructive videos you put together for us.
by: Winton03/08/2018
Solera Slide Awnings Installed
by: Randy03/30/2022
You are a very good company to deal with,you got my order to me very quickly!, and I greatly appreciate it, your installation video was very helpful,would highly recommend you.
by: James S03/05/2018
Great product easy install fast shipping Thank you etrailer
by: Scott 08/11/2021
Great service
by: Firas06/08/2023
by: Alan 12/15/2022
by: Tim 01/22/2023
by: Randy 08/28/2022
by: Adam04/13/2021
by: Anna 07/26/2022
by: Linda 01/08/2022
by: Terry01/25/2021
by: Jimmie04/23/2023
Carol, I wanted to send you photos of how I received my two packages from the freight company. Y'all have been great to deal with but the delivery method needs improving. As long as my awnings are not missing any parts and are not damaged, I will be happy. But I just got back home and found the boxes like this. I thought you would want to know.
by: Robert03/13/2024
This awning was packaged well and it arrived undamaged, however, when I took it out of the package the top rail was bent and the groove where the awning slides in was damaged. I was able to open the groove by bending and it was still serviceable. The hardware package had been opened previously, but nothing was missing. On the bead end of the vinyl where it is glued together was not glued properly. It was on the leading end of the awning so it would take a beating while driving. I repaired it with super glue and hopefully it will hold properly. Those are my complaints and why I gave it only 3 stars. On the other hand, the instructions were thorough and easy to follow. The hardware installation was straight forward and was completed without issue.
I have purchased from etrailer for years and have been very satisfied with the service and quality of their products. This one didn’t measure up due to the factors above.
by: Mitch12/29/2023
Product was destroyed in transit. Please refund my money. I will not be interested in further negotiations with e trailer. It seems to be a systematic issue with your choice of transportation vendor. Best wishes.
by: Hansen48902/09/2023
I purchased a total of 5 slide toppers for my Grand Design Solitude 390RK. After a year of use I love them. No more climbing on the roof to clean off the slide outs before retracting them. Very little flapping and only in very strong winds. Had one person helping to install 3 of them, 2 I installed by myself. It wasn't that hard. Took a little over an hour to install each one. Saved hundreds of dollars by doing it myself. Would definitely buy them and install them again again. Had very fast and good service from etrailer.
by: Ryan05/30/2022
Perfect fit for my Coachmen Clipper 17BHS slide out. Install was easy with the etrailer install video! They cover every step in the video and explain assembly better than the supplied instructions. Works great at keeping out the leaves, hoping it works to help keep water out of the slide out seams too.
by: GR07/10/2023
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
by: Cecil08/01/2023
Your choice of LTL carrier is poor at best. They arrived a week later than what they originally scheduled. All 3 packing tubes that the slide toppers were shipped in were damaged. Off loading and inspecting was a challenge in 106deg heat and a busy roadway. Did manage to confirm that the hardware kits were still intact. As for tube damage we will see what they look like during install this weekend
by: Travis01/03/2019
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
by: Jeffery12/05/2022
I purchased the Lippert solera slide topper for our camper sence all the reviews and information I have read is that this is the best brand to get.
Looks good and can't wait to install it this summer. The first one showed up damage & missing parts during freight shipping but I called etrailers customer service and they got things going on what to do next. Alison B. a customer service rep contacted me and with a few calls and emails they sent out a New one & everything worked out great. Thanks again to Alison & the customer service team .I will definitely purchase more from etrailer in the future. Pictures to be posted of the install later when warm weather returns.
by: Stanley01/29/2024
The product is a good product if I could get one shipped to me that was not damaged. The shipper etrailer uses Tforce and they really suck. I have received two of these awnings and both were bent and unusable. I received a refund for the first one ordered another it was also bent. I recommend ordering from another vender.
by: Randy04/17/2022
Great product. Very timely delivery. Installation was a breeze. Looking forward to the added protection this provides my slide out.
by: Michael05/05/2024
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
25
947
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- Correct Slide Topper Awnings For a 97" Wide Slide Measured Outer Flange to Outer FlangeWith the slide on your camper being 97" wide from outside flange to outside flange the Solera RV Slide-Out Awning in White # LCV000163290 or Black # LCV000168108 is the widest you will be able to go. The fabric on these are 103" wide which gives you 3" past the flange on each side. You will not be able to install the 9'1" Slide Topper # LCV000168325 as the mounting arms are long enough to fit properly into the brackets on the slide out.
view full answer... - Solera Slide-Topper for 73", 83-1/4", and 108-1/4" Slide-Outs For your three slide-outs you will need the following Solera Slide-Toppers: 1. 73" - Solera Slide-Out - Black # LCV000165063 2. 83-1/4" - Solera Slide-Out - Black # LCV000165062 3. 108-1/4" - Solera Slide-Out - Black # LCV000168325 These kits include all the needed brackets and hardware along with the awning rail. I have attached the installation instructions along with a sample install video that you can take a look at as well.
view full answer... - Replacement Slide Topper for 104.5 Inch Long Slide OutAs a general rule of thumb, you will want the slide topper rail to be about 6" longer than the fabric. The correct way to measure the rail is from the end of each end cap, not the rail itself. The fabric included with part # LCV000168325 is 109" long therefore this would be the best fit replacement fabric we have for you. The above fabric is black in color, made here in the U.S.A. and comes with a 1-year warranty. I have attached a review video this fabric in a different color for you as well.
view full answer... - Recommended Slide Out Awning Slide-Toppers Based on Flange to Flange MeasurementsFor your slide out that is 73.25 inches if that measurement includes the flanges on the sides, then you will use the Solera 6.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000165063. If that measurement didn't include the flange on either side and with the flange you are over 73.75 inches, then you would want the Solera 7' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000168105. For your 103 inch slide out the same thing will happen. If you measured from flange to...
view full answer... - Slide Out Topper Needed for 2020 Jayco Eagle HT Travel TrailerSince your flange-to-flange measurement is 106" you'll want to go with either the Black # LCV000168325 or White # LCV000163291 Slide-Out Awning Kit. These some with the mounting brackets and flanges so if you already have those installed on your 2020 Jayco Eagle HT you can keep them as extras in case you eventually need them. Attached is a review video that you can check out.
view full answer... - How To Choose the Correct Slide-Topper AwningThe correct way to measure for a slide topper awning is from the outside edge of each flange. If this is where you measured to get 107" then you would want to use the Solera 9.5' Slider Slide-Topper part # LCV000163291 for white or part # LCV000168325 for black which are for a box width range (flange to flange) of 104" to 109-3/4". If this is also where you measured to get 142" then you would want to use the Solera 12.5' Slider Slide-Topper part # LCV000163298 for white or part # LCV000177334...
view full answer...
- Choosing a Slide-Topper for 109 Inch Slide-OutThe flange-to-flange measurement you took is the correct way to measure for a slide-topper and the width you need is one that extends past the slide-out's overall width so for your 109 inch (9 foot, 1 inch) slide-out you will want a 9-1/2 foot slide-topper. For that we have the Solera 9.5' Slider (Slide-Topper) in White w/ White Hardware # LCV000163291 or for Black with Black hardware you need part # LCV000168325.
view full answer... - Correct Slide-Out Awning For 109 Inch End to End MeasurementThe correct slide-topper does depend on the end-to-end measurement, and the 109 inches you got is the necessary info needed for the right fit. What you need for a 109 inch measurement is one of the following, depending on if you want White or Black: - White: Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection # LCV000163291 - Black: Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection # LCV000168325
view full answer... - Slide-Out Awning for a 9 Foot Wide Slide-Out on a TrailerThe flange or awning rail is attached to the outside wall of the trailer and is what holds the awning on the trailer end. We don't carry them but they are readily available online if the trailer does not have one. You do want the awning fabric to be 6 or 7 inches wider than the slide-out's overall width. For a 9-1/2 foot black slide-out awning use # LCV000168325. For white use # LCV000163291.
view full answer... - What Slide Topper Do I Need for My Slide Out Measuring 104" Wide Flange to FlangeFor your slide out that measures 104" wide you will want the Solera RV Slide-Out Awning # LCV000168325 (for black) or # LCV000163291 (for white). The Solera RV Slide-Out Awning # LCV000168104 (for 57"-61" wide) slide outs will not work for your 50.5" slide out. It would be too wide to properly install. Unfortunately we do not have a slide out topper that is small enough for your 50.5" slide out.
view full answer... - Recommended Slide-Out Topper Awning for a Slide-Out That Measures 111 Inches WideI have a solution for you, however, the slide-out awning that you referenced in your question will be too short for your application. The Solera 10 Foot Slider Awning, # LCV000251461, will fit a slider box that measures between 110 to 115-3/4 inches wide. This awning has black fabric and include black hardware.
view full answer... - Solera Silde Out Topper Replacements For 2020 Forest River Wildwood Heritage Glen Fifth WheelFor your 2020 Forest River Wildwood Heritage Glen 290rl Fifth Wheel I recommend product # LCV000168325 for the bedroom slide, product # LCV000177334 for the kitchen, and product # LCV000168109 for the dinette. These products are manufacturer recommended as well even though you're tight on space between the flange and the awning arm. All listed products are Solera brand and come in black to match your camper's aesthetics.
view full answer... - Does Solera Awning part # LCV000168325 Fit Slide Out that is 109 inches WideYes, the awning part # LCV000168325 that you referenced is a correct fit for your slide out that measures 109 inches. This is a fit for awnings that are between 104 and 109-3/4 inches in width so it would work perfectly for you.
view full answer... - Solera Slide Toppers Available Sizes and How To Measure On a Jayco Eagle Travel TrailerTo find the toppers for your Jayco Eagle HT 2835RSTS you will need to measure your 3 slide outs. The measurement will be from outside flange to outside flange. If you don't have at least 7" of clearance on both sides of your slide-out box, order the next size down. I can help you determine the correct size if you can send me the measurements of each of your slides along with images so I can help determine if any awnings or other items might be in the way. Solera RV Slide-Out Awning 57"...
view full answer... - Slide Topper Recommendation for 2014 Ford CoachmanThe slide topper you need is the part # LCV000168325 from Solera. This comes with all of the needed hardware and rail to install. The flange width range of this is 104" to 109-3/4" which will be exactly what your 9 foot wide flange requires.
view full answer... - Replacement Slider Awnings For A Montana CamperThe 10' 10.5" replacement is part Solera RV Slide-Out Awning # LCV000184673, the 13' 7.5" replacement is the # LCV000168110 and the 8'8" is the # LCV000168325. I reached out to our supplier to confirm fit and given the flange measurements you provided the following awnings will replace the slider awnings for your Montana in black. I've included review and installation videos to help get you started.
view full answer... - Color Choices For Slide Out Toppers.We have what you need. The only two colors made in these products are black or white. These sizes will fit your slide outs and have 2-1/2 inches of overhang on each side as is recommended by the manufacturer. I will list the black colored options first and the white colored options second. Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106. Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106. Solera RV Slide-Out Awning - 9'1" Wide...
view full answer... - RV Slide Out Awnings for Flange Widths of 81.25, 109.25, and 142For the 81-1/4 inch slide out we have the part # LCV000165062 for black and part # LCV000163287 for white, for the 109-1/4 inch slide out we have the part # LCV000168325 for black and part # LCV000163291 for white. For the 142 inch slide out we have the part # LCV000177334 for black or part # LCV000163298 for white.
view full answer... - Recommended Black Slide Toppers For 3 Slide-OutsSure thing! For your first slide-out measuring 104-1/2", I recommend checking out the: -Solera RV Slide-Out Awning # LCV000168325. This topper is black in color, and will fit slide-outs 104"-109" wide and up to 48" long. For your second slide-out measuring 75-1/2" wide, I recommend checking out the Solera RV Slide-Out Awning # LCV000168105. This topper is also black in color, and will fit slide outs 74"-79" wide, and up to 48" long. Finally, for your last slide-out measuring 81" wide,...
view full answer... - Recommended Slide Topper Awnings for Forest River Rockwood 2863MBRI do have an option for you but we don't offer custom size slide topper awnings. That said, if you don't have at least 7" of clearance on either side of the slide out you will just simply order the next size down, the Solera RV Slide-Out Awning part # LCV000168325 for black or part # LCV000163291 for white which is for the 111" slide out and the Solera RV Slide-Out Awning part #LCV000163287 for white or part # LCV000165062 for black which is for the 90" slide out.
view full answer... - Slide Out Topper For 103 Inch Flange To RV Flange Slide OutI can help you out for sure. Slide out toppers are not as hard as we make them out to be. You need 2-1/2 inches of over hang on each side of the slide out. So just measure flange to flange and add 5 inches. So if you have 103 inches from flange to flange the Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection - White # LCV000163291 or the Solera RV Slide-Out Awning - 9'1" Wide - 48" Projection - Black # LCV000168325 will be just right for your needs. The installation hardware is...
view full answer... - Slide Topper Awnings for 2021 Rockwood Mini Lite For the 71 inch slide out we have the Solera Slide Topper part # LCV000163279 for white or part # LCV000165063 for black. In the 105 inch size we have the part # LCV000168325 for black or part # LCV000163291 for white.
view full answer... - Clearance Above Slide-Out Needed for Installing Slide Topper When installing a Slide-Topper on your trailer, you will just want the awning rail to be a couple inches above the top flange on the slide-out. This is simply to provide a slight downward angle for rain runoff. There shouldn't be any issue with installing the awning frame just beneath the gutter on your FunFinder. The Solera 9.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000168325 will work perfectly for your box width of 108 inches. This slider features an overall width of...
view full answer... - Slide Out Awning Toppers for 79-3/4 Inch, 106-1/4 Inch, and 67-7/8 Inch Long Slide OutsFor a slide out that is 79-3/4 inches you could probably use a 7 foot topper such as # LCV000168105 which is going to be 84 inches long. It would be 2-1/8 inches on each side. If a white topper will work for you then you could use # LCV000163287 which is 90 inches long. For the 106-1/4 inch slide out you would use a 9-1/2 foot topper, # LCV000168325, which is 114 inches long. And for the 67-7/8 inch long slide out you can use 6-1/2 foot topper, # LCV000165063, which is 78 inches long.
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
Randy B
Written by:
Kristen H
Test Fit:
Shane H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.