Solera RV Slide-Out Awning - 121" Wide - White
(1107 reviews)
Price: $490.70
In Stock
Solera RV Slide-Out Awning - 121" Wide - White
Item # LCV000163293
Retail:$866.96
Our Price: $490.70
You Save: $376.26
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1107)
- Q & A (0)
- Photos
Lippert RV Awnings - LCV000163293
- Slide-Out Awnings
- 116 Inch Wide
- 117 Inch Wide
- 118 Inch Wide
- 119 Inch Wide
- 120 Inch Wide
- 121 Inch Wide
- White
- Extends 48 Inches
- Lippert
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 10'1" from edge to edge. Includes all necessary components.
Features:
- Slide-topper protects your RV slide-out from leaves, debris, and pooling water
- Prevents damage and mildew
- Helps keep RV interior cool by providing shade from the sun
- Awning automatically extends and retracts with your slide-out
- Heavy-duty, durable fabric is made with premium 13.5-oz vinyl and won't crack in cold temperatures
- Heat-welded seams prevent leaks
- White awning fabric matches white hardware
- Simple installation with included brackets, hardware, and awning rail
- Made in the USA
Specs:
- Application: slide-outs 116" - 121" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 121" long
- Awning fabric (when fully extended): 121" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you dont have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
V000163293 Lippert Solera 10'1" Slider (Slide-Topper) in White w/ White Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Customer Reviews
Solera RV Slide-Out Awning - 121" Wide - White - LCV000163293
Average Customer Rating: 4.6 out of 5 stars (1107 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 10'1" from edge to edge. Includes all necessary components.by: Bernard04/30/2024
The package for the 151in was missing the rail to mount the cover to the motor home still waiting for it to come
by: Shawn10/31/2019
Installation was easy with the directions that came with it. Everything went smooth, quality seems to be great. I am very pleased overall and would recommend this to anyone that needs to add a slide topper!
by: Maurice 08/22/2022
So far so good, Was an easy installation, two person job for sure. It is nice to have my awning covered. Would by another one.
by: Chuck08/10/2021
Even though the products were what I asked for. The installation went well. My problem was with shipping. Not etrailers fault, but part of order was lost somewhere. etrailer stepped up and reshipped the missing order. Parts came in on time for us to go on vacation.
by: JDB07/16/2022
Overall good product, very easy install ation.
by: Russ06/21/2022
We are very pleased with this idea. It has done a great job for us. We want to order another one for the bedroom. I would recommend this to anyone. Thank you
by: David 09/16/2022
Good quality and shipping was fast
by: Bill 08/27/2020
received order on time. just starting to install , need two hands to finish. looks to be right so far.
by: Andy06/22/2022
Great product
by: Phil 05/08/2021
by: Laura 04/20/2021
by: Glenn 02/26/2021
by: John 08/17/2022
by: Jimmie04/23/2023
Carol, I wanted to send you photos of how I received my two packages from the freight company. Y'all have been great to deal with but the delivery method needs improving. As long as my awnings are not missing any parts and are not damaged, I will be happy. But I just got back home and found the boxes like this. I thought you would want to know.
by: Robert03/13/2024
This awning was packaged well and it arrived undamaged, however, when I took it out of the package the top rail was bent and the groove where the awning slides in was damaged. I was able to open the groove by bending and it was still serviceable. The hardware package had been opened previously, but nothing was missing. On the bead end of the vinyl where it is glued together was not glued properly. It was on the leading end of the awning so it would take a beating while driving. I repaired it with super glue and hopefully it will hold properly. Those are my complaints and why I gave it only 3 stars. On the other hand, the instructions were thorough and easy to follow. The hardware installation was straight forward and was completed without issue.
I have purchased from etrailer for years and have been very satisfied with the service and quality of their products. This one didn’t measure up due to the factors above.
by: Mitch12/29/2023
Product was destroyed in transit. Please refund my money. I will not be interested in further negotiations with e trailer. It seems to be a systematic issue with your choice of transportation vendor. Best wishes.
by: Ryan05/30/2022
Perfect fit for my Coachmen Clipper 17BHS slide out. Install was easy with the etrailer install video! They cover every step in the video and explain assembly better than the supplied instructions. Works great at keeping out the leaves, hoping it works to help keep water out of the slide out seams too.
by: Hansen48902/09/2023
I purchased a total of 5 slide toppers for my Grand Design Solitude 390RK. After a year of use I love them. No more climbing on the roof to clean off the slide outs before retracting them. Very little flapping and only in very strong winds. Had one person helping to install 3 of them, 2 I installed by myself. It wasn't that hard. Took a little over an hour to install each one. Saved hundreds of dollars by doing it myself. Would definitely buy them and install them again again. Had very fast and good service from etrailer.
by: GR07/10/2023
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
by: Cecil08/01/2023
Your choice of LTL carrier is poor at best. They arrived a week later than what they originally scheduled. All 3 packing tubes that the slide toppers were shipped in were damaged. Off loading and inspecting was a challenge in 106deg heat and a busy roadway. Did manage to confirm that the hardware kits were still intact. As for tube damage we will see what they look like during install this weekend
by: Stanley01/29/2024
The product is a good product if I could get one shipped to me that was not damaged. The shipper etrailer uses Tforce and they really suck. I have received two of these awnings and both were bent and unusable. I received a refund for the first one ordered another it was also bent. I recommend ordering from another vender.
by: Travis01/03/2019
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
by: Jeffery12/05/2022
I purchased the Lippert solera slide topper for our camper sence all the reviews and information I have read is that this is the best brand to get.
Looks good and can't wait to install it this summer. The first one showed up damage & missing parts during freight shipping but I called etrailers customer service and they got things going on what to do next. Alison B. a customer service rep contacted me and with a few calls and emails they sent out a New one & everything worked out great. Thanks again to Alison & the customer service team .I will definitely purchase more from etrailer in the future. Pictures to be posted of the install later when warm weather returns.
by: Randy04/17/2022
Great product. Very timely delivery. Installation was a breeze. Looking forward to the added protection this provides my slide out.
by: Michael05/05/2024
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
25
948
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- What to Measure to Find Correct Slide-Out RV Awning I can tell you how to measure for the correct slide out awning, and it's actually really simple and will only take a moment. So all you need to do to determine the correct slide-out awing is simply measure the entire width - from outside flange to outside flange - of your slide out and that's it. For example, if you measured, and the width - including the flanges - was between 116" and 121" wide you would need the Solera RV Slide-Out Awning - Black # LCV000182037 or White # LCV000163293. I...
view full answer... - Solera RV Slide-Out Awning RecommendationsFor an RV with a slide that measures 116" from flange to flange on the outside of RV, you will want to order the 10-1/2' awning, # LCV000182037 for black or # LCV000163293 for white. This will provide you with and actual awning fabric (when fully extended) that is 121" wide providing 2-1/2" of overhang each side; which is the minimum suggested length. Please see the attached review and installation videos.
view full answer... - Recommended Slide-Topper for 2017 Grand Design Imagine RVFor your camper slide-out that has an outside width of 116.5 inches, I recommend looking at the Solera 10.5 Ft Slider in Black # LCV000182037 or White # LCV000163293. This Solera Slider is 126 inches wide and has a box width range of 116 to 121-3/4 inches. Box width is measured on the outside front of the box, including flange. You just want to select a size that extends a minimum of 2-1/2 inches beyond each side of your slide box width. I have attached a demonstration video of this product...
view full answer... - Recommended Wet Bolts for Road Armor Equalizers and Slide Out Toppers for 119 and 141 Slide OutTo answer the crux of the main question, you can use the Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2 # LC696740 on your trailer and you'll need to use some longer shackles to make up for the additional length of the new equalizer. If you've got a 2-1/4" shackle then likely going up to something like the # TRSL313 that is 3-1/8" would suffice for you; you won't need a full 2" because the shackles will sit at an angle to connect to the springs. Since you're also wanting...
view full answer... - Slide-Out Awning for a Dutchman Denali with 10 Foot Wide Slide-Out BoxTo order the correct Solera Slider, select the fabric size that extends a minimum of 2-1/2" beyond each side of your slide box width. Box width is measured on the outside front of the box including the flanges. Also keep in mind that you will need 6" of clearance beyond the outside edges of the box to accommodate the overall length of the assembly. If 10 feet is the outside width of the slide-out including the flanges then you would need to look at 10-1/2 foot awnings such as # LCV000163293....
view full answer... - Correct RV Slide Out Awning for 114 inch Wide and 143 inch Wide Slide OutsThe word directly from Lippert/Solera, who makes the slide out awnings, is that you want to add 2-1/2" for overhang on both sides of your slide out box when including the flange. So for your 114" you want an awning that includes 119" in the range that it fits, and then for your 143" you want an awning that includes 148" in the range that it fits (see options linked below). For your 114" slide out: White - # LCV000163293 Black - # LCV000182037 For your 143" slide out: White - # LCV000163299 I...
view full answer... - Slide-Out Awning for 116.5 Inch Wide Slide-Out BoxFor a slide-out awning for your 116.5 inch wide slide-out box you will need a 10-1/2 foot model, # LCV000163293. It is designed for a box width range of 116 inches to 121-3/4 inches. All of the parts needed for installation are included.
view full answer... - Slideout Awning Recommendation for Trailer with 118 inch Slide OutBased on your slide out measuring 118 inches like you mentioned the correct slide out awning is the part # LCV000163293 that you referenced.
view full answer... - Correct Solera Slide-Topper for 119.5 inch Slide-Out on 2020 KZ Half-Ton DurangoFor your 119.5" slide out on your 2020 KZ Half-Ton Durango you need a 10'1" Solera Slide-Out Awning which comes either in Black # LCV000182037 or White # LCV000163293 depending on what you'd rather have for your application. Some of the info regarding awnings can be a little confusing because it seems like they are always changing the rules on us so I definitely understand where you are coming from. The 10'1" awnings are designed for slide outs that measure 116" - 121" wide which is the...
view full answer... - Correct RV Slide Out Awnings for Trailer With 81", 116", and 122" SlidesThe correct Solera RV Slide-Out Awning for this trailer are as follows: 122-1/4" : part # LCV000168326 or part # LCV000163294 116-1/2" : part # LCV000182037 or part # LCV000163293 81-3/4" : part # LCV000165062 or part # LCV000163287
view full answer... - Solera Slide-Out Awnings for Grand Design Reflection I am happy to provide you with the correct Solera Slide-Out Awnings for the slide-outs on your Grand Design Reflection! If I am understanding correctly, it sounds like you have already added 5 inches to each of the slide-out widths that you listed (2-1/2 inches on each side of the slide-out). If this is the case you will need the following Slide-Out Awnings: 125" x 24" slide-out (120" flange to flange) - part # LCV000182037 for Black or # LCV000163293 for White 71-1/2" x 20" slide-out...
view full answer... - Awning Recommendation for a 124" Slide Out on a Hideout 186SS TrailerThe best option we have for your 124" wide slideout on your Hideout 186SS is the Solera RV Slide-Out Awning - 10'7" Wide - 48" Projection # LCV000168326 (black) or the # LCV000163294 (white). The great thing about the Solera awnings is that the fabric is made of strong vinyl that prevents cracking. It is also made 100% in the U.S.A. In order to make sure this is the perfect fit for you, you need to make sure you have at least 7" of clearance on both sides of your slide to accommodate...
view full answer... - Correct Solera RV Slide-Out Awning for 2020 Forest River Catalina SBX 241RLSThe correct Solera RV Slide-Out Awning for a 121" slide-out (flange to flange) on a 2020 Forest River Catalina SBX 241RLS is part # LCV000182037 for black or part # LCV000163293 for white. In regards to adding a spacer between the trailer and extension rod barcket, I don't see too much an issue with this so long as you have the hardware attached to the backing but you may need longer screws worse case. That said, I would see if modifications can be made to the refrigerator vent first. If...
view full answer... - Solera RV Slide-Out Awnings for your 2022 Grand Design Reflecting 31MBFor your slide-out listed as being 116-1/4" as measured from outside edge of flange to outside edge of flange, I suggest the Solera RV Slide-Out Awning - 10'1" Wide & 48" Projection, # LCV000163293 for white or # LCV000182037 for black. For your slide-out listed as being 81”5/8” as measured from outside edge of flange to outside edge of flange, I suggest the Solera RV Slide-Out Awning - 7'1" Wide & 48" Projection, # LCV000165062 for white or # LCV000163287 for black. For your slide-out...
view full answer... - Recommended Slide Topper for Grand Design Transcend 29TBS with 118 Inches Flange to FlangeFor your Grand Design Transcend 29TBS the slide topper I recommend for your 118 inch flange to flange measurement is the Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037. This slide topper is designed for a box width from flange to flange of 116 to 121-3/4 inches. This will fit your slide out perfectly. It is also available in white with white hardware # LCV000163293. These awnings come with all the awning rail included.
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Video by:
Jonathan Y
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Amanda K
Written by:
Kristen H
Installed by:
Shane H
Test Fit:
David F
Test Fit:
Kevin C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Shawn E.
11/1/2020
After 1yr it is still great! Very happy with this awning. I used it all summer and besides needing to be cleaned, it is in perfect condition. Would definitely purchase again.