Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your RV electrical cables safe and out of the way. This durable polypropylene design replaces your old or damaged cable hatch. Housing fits into a 3-1/2" cutout, and the sliding door lets you run cable out while the door is shut.
Features:
Specs:
How to Properly Measure for Cut-Out Dimension
There are two main dimensions you need to know when choosing a replacement access door or adding a new one to your RV:
The cut-out diameter is the width of the circle needed to ensure the access door mounts flush to the wall of your RV.
The mounting depth is the depth needed behind the mounting surface for the access door's hatch to properly fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Valterra electric cable hatch for RVs. This one is for use with RV electrical cables up to 50 amps. It does come with the included installation putty tape and the necessary mounting hardware. The screw heads are painted are actually painted to match the color of the hatch, so it gives it a nice, clean finished look. The hatch door is going to swing open for easy access. Then the unit also has a sliding door that allows the cable to pass through when the main hatch door is closed.
With that closed, it's going to help keep unwanted items out of the stored area when the cable isn't being used. When it comes to the overall dimensions, taking a look at the overall diameter, that's going to give us a measurement of about 5 1/8 of an inch. When it comes to the overall depth, very back to very front, that's going to give us a measurement of about 2 5/8 of an inch deep. It does require a cut out for this area to fit into. Your cut out is going to need a minimum diameter measurement of about 3 1/2 inches, in order for this to fit. The unit is white in color. It's going to contain three mount holes.
Our mount hole separation, center on center, is going to be about 3 7/8 of an inch apart. That's going to be the same separation between each hole. This hole right here, that's going to measure about 1 inch by 1 inch, so plenty of room right there to feed the cable through. The large hole, this is going to give us a diameter, here at the opening of about 3 1/4 inches. It's going to give us a depth of pretty close to 2 3/8 of an inch. That's going to do it for today's look at the Valterra electric cable hatch for RVs..
Average Customer Rating: 4.8 out of 5 stars (30 Customer Reviews)
Keep your RV electrical cables safe and out of the way. This durable polypropylene design replaces your old or damaged cable hatch. Housing fits into a 3-1/2" cutout, and the sliding door lets you run cable out while the door is shut.Just what I needed, worked great
Looks really good, but am concerned that when exposed to really cold weather the door may break upon opening it. It seems to latch so tight and the door actually has to flex a little bit for it to open. We'll see what happens once Winter gets here.
This hatch replaces one that the cover broke off while traveling with my fifth wheel trailer. It seems more sturdy than the one it replaced and hopefully will last a long time
Exactly the replacement I was looking for with fast shipping.
Quick Service, easy installation, product included everything needed to install.
This is the exact replacement parts, I needed.
Customer service was excellent and fast delivery.
Just what I was looking for it fit perfectly to replace the old one that I broke off
The right product for our job. Easy to do business with etrailer.com
Fit perfectly, I expected no less from etrailer they all way get it right. Great job ladies and gentlemen.
Perfect fit for my trailer.
Used this to replace original on a 1983 scamp 16. Works great!
works well easy to install, I like the larger opening for
large plugs.
Great product easy to install holding up well
just what i ordered THANKS
Screw holes exact fit, outside diameter exact, inside hole exact. Fits prefect had it on in less than 5 minutes..
Exact fit. Part works great.
Very happy with this item and how fast my order was delivered....
Good product good people to deal with fast shipping will use again as needed.
It fit perfectly.
Was the right parts. Ordering was fast and easy! Thank You
thanks very good
Just like O.E.M. Part for my 09 Jayco camper-perfect fit.
Do you have a question about this RV Access Door?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roy J.
6/2/2019
Still holding up good as new