bing tracking image
  1. Lubricants Sealants Adhesives
  2. LubriMatic
  3. Grease
  4. Brake and Bearing Grease
  5. Standard Bearing Grease
  6. 14 oz
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge

LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge

Item # L11465
Our Price: $19.01
Lubricants Sealants Adhesives
Shipping Weight: 1.04 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life. Fastest Shipping and Great prices for LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge. Read our customer reviews of LubriMatic lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number L11465 by LubriMatic online at etrailer.com.
  • All Info
  • Reviews (86)
  • Q & A (0)
  • Photos

LubriMatic Lubricants Sealants Adhesives - L11465

  • Grease
  • Brake and Bearing Grease
  • Standard Bearing Grease
  • 14 oz
  • Petroleum-Based
  • LubriMatic
  • Polyurea - Conventional

This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life.


Features:

  • Resists high temperatures for wheel bearings for all disc and drum brake applications
  • Formulated with polyurea for improved bearing protection and longer electric motor life
  • Made in the USA


Specs:

  • Quantity: 14-oz cartridge
  • Application: wheel bearings for disc brake and drum brake applications
  • NLGI grade: #2 (about the consistency of peanut butter)
  • Drop point: 500 degrees F


11465 Plews & Edelmann LUBRIPLATE Poly HP-2 from LubriMatic Wheel Bearing Grease for Disk and Drum Brake Applications - 14-oz Cartridge





Customer Satisfaction Score:


Customer Reviews

LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge - L11465

Average Customer Rating:  4.8 out of 5 stars   (86 Customer Reviews)

This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life.

by:

Great Grease! I prefer this in trailer bearings that do not need marine grade grease.

I cannot buy this grease in tubes locally and only one store sells this by the small can. I made sure recently to purge the unknown grease out of my camper bearings and replaced with this brand as I know it and trust this product. I wanted to get tubes for my now dedicated grease gun for my trailers and etrailer was the only way to go.

etrailer has the best price and ordering tubes allows me to put the same bearing grease into my Bearing Buddies as I packed my bearings with.

Matt W.

1/27/2015

Still working fine. Holds up the way I expect.



by:

Great "tacky" wheel bearing grease...holds on bearings well.....5-stars!



by:

THIS GREASE IS SUPPOSE TO BE VERY GOOD. DOWNSIDE IS AVAILABILITY. BEING A POLYUREA CONVENTIONAL TYPE GREASE IT NOT COMPATIBLE WITH THE MORE AVAILABLE GREASE AT AUTO PART STORES, SO YOU BETTER KEEP A CARTRIDGE IN YOUR BACK POCKET AT ALL TIMES. BUYING FROM E-TRAILER IS A PLEASURE.



by:

etrailer was where I found the Lubrimatic grease for my trailer bearings. The price was right and the shipping on a small order was only 4.99. This arrived in 3 days with standard shipping. Thanks for the great turnaround time.

Foster G.

8/24/2018

very good



by:

We recently placed an order for several items. However, an issue arose with an out of stock item. Ensuring that the order would not be delayed, the etrailer team substituted a comparable product. This makes for great customer service. Sometimes the test of a company is how they respond to issues that arise. All of the staff that we have dealt with have provided excellent service. They definitely get five stars from us.



by:

Have used this grease for years, stands up good to water. It is all I use in the bearings on my off road trailer, never had a problem.

Mark E.

8/19/2015

still works great, no problems at all



by:

Works great for trailer bearings, thanks, jeff

Jeff B.

3/26/2017

Its working great, no bearing failures, thanks !!



by:

Love it. Use it for wheel bearings.

Dave W.

8/23/2021

Great Product. No Problems.



by:

I purchased to grease a trailer that I just purchased. Having never done this before, I had no idea how much I needed to do all of the EZ-Lube wheel bearings. I bought one tube and this got me through two wheels. I ended up ordering two more tubes that I'm now waiting on.

I think half a tube per EZ-Lube wheel. So two tubes for a trailer with four wheels. I ordered an extra tube to make sure.



by:

Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone.



by:

Before I ordered any grease from anyone... I checked around on-line for information on what I should be looking for, as far as specifications and usage. Then I checked to see what etrailer. had. I've ordered from etrailer several times before and been very satisfied with the products and the service. This product more than met the requirements I wanted, and I learned from my very first order, the people at etrailer are paying attention! I can't see what this stuff is actually doing... so, I have to believe in who is selling it.



by:

Great well organized place to get trailer stuff from...Thank you



by:

All the products I purchase from etrailer (most recently trailer bearing grease and five pin trailer plugs) are always high quality and do the job they are designed to do. The prices are reasonable also.



by:

Bought this product to use for greasing the wheel bearings on my Grand Design 5th wheel. Product had good reviews. To soon to evaluate. Will respond as I get some miles on the product.



by:

Have problem with new wheel bearing. I checked both on the spindle before installing in the hub/drum. One was OK the second would not go. Saved if you would need to see it. The rest of the installation went well. Good delivery time



by:

Had ordered brakes for my travel trailer and in a few days I got them. No problems with the packaging and I got free shipping. Service was excellent and I would highly reccomend etrailer for parts. I would definitely buy from them again.



by:

Worked as designed. Easy way to install new dust caps and minimize damage to cap when installing. Used wood for years ...... but this is way easier to store in your tool box.



by:

Great product and very "sticky" which is exactly what I want for hard use applications. I originally bought this to repack wheel bearings but was so impressed with it that I now keep it in my grease gun to lubricate my farm equipment.



by:

A must have for disk brake users. Other grease types leak out the seals where this stuff stays put



by:

Nothing bad to say about product. I use it specifically for greasing our travel trailer bearings.



by:

This grease has worked very well for my salt water boat trailer for many years.
Quick on time delivery. The staff is very helpful and knowledgeable .



by:

This is the wheel bearing grease recommended by pop up camper maker. The grease tube fit my grease gun perfectly making my grease job very easy and neat.



by:

Good, high quality grease for my trailer hubs.



by:

Product works great,had no leaking from my grease gun unlike some others I have used. Reccomend this product.



by:

Good grease. Need 2 tubes though to do all 4 wheels. I only ordered 1. My bad


25
86
Show More Reviews

See what our Experts say about this LubriMatic Lubricants Sealants Adhesives

  • What Grease Should Be Used In Trailer Hub When Current Grease Complex Is Unknown
    That will really depend on the bearing grease used in the hubs of your Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. Typically manufacturer's of utility trailers use a standard grease like the # L11465 or # L11380 you saw mentioned, but this grease is only compatible with polyurea based conventional greases. What I recommend instead is since DK2 is unable to provide the complex of the factory grease, Remove the hubs and clean out all of the factory grease. Once that is done...
    view full answer...
  • Grease Fitting Locations for Curt A20 Fifth Wheel Hitch
    The zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
    view full answer...
    Image 1 for
  • Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
    The brake assemblies that I recommend to replace your AL-KO brakes are # AKEBRK-35R and # AKEBRK-35L. Theses are the brake assemblies for both the left and right sides of the axle. I like these brake assemblies over the others we carry for two reasons, the shoe pads are machined rather than clipped and the magnets on theses brakes are thicker. The machined shoe pad will wear better and are sturdier than the clipped end shoe pad. The thicker magnet will wear better and in turn last longer...
    view full answer...
    Image 1 for
  • Recommended Grease for Curt Q20 Fifth Wheel Hitch
    According to Curt the recommended grease for your Curt Q20 # C16530-16017 fifth wheel hitch is a high-pressure wheel bearing grease. For this I recommend the LubriMatic Wheel Bearing Grease # L11465.
    view full answer...
  • Which Bearing Buddy and Grease for 1700 Lbs Carry-on Utility Trailer
    Although bearing buddies are primarily meant for boat or PWC trailers, you can certainly use them on a utility trailer. To choose the correct diameter Bearing Buddy use a precise measuring tool like a dial caliper and measure the inner diameter on the hub where the grease cap sits. You will want to match that measurement as closely as possible to the measurement on the Bearing Buddy product pages. I have attached a link to all of our bearing protectors for you to reference. The alternative...
    view full answer...
  • Bearing Grease Recommendation for Packing Utility Trailer Bearings
    For wheel bearing grease I would go with good ol' high temp grease # L11380. It has many other uses other than just wheel bearings. The key with grease is to clean off all of the old grease because some formulas are not compatible with each other. I have included a link that should help with that. The other thing about grease is that its messy. So to make it less messy you could use a bearing packer such as # L70025. And if you went that route then you would need a cartridge of grease...
    view full answer...
  • Do Hubs have to be Removed to Add Grease to Bearings on an EZ Lube Trailer Axle
    No, you do not have to remove the hubs on an EZ Lube axle and hubs to pack the bearings with grease. You would use the grease zerk fittings at the ends of each spindle to add grease using a grease gun such as # L30200. The trick is to use new grease that is compatible with the old grease. Some greases are not compatible and will cause each other to break down which can lead to over heating and damage to the bearings, spindle, and hubs. A bearing grease such as # L11465 is formulated...
    view full answer...
  • Bearings, Seal, Grease Cap, & Grease For Malone MicroSport Trailer
    We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer # MPG460G. What you will need is the following: - Bearing Kit # BK1-100 - Grease Cap # F001518 - LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 The bearing kit comes with the correct bearings, races, and seal for one hub on your MicroSport trailer. Then for a grease gun and bearing packer use the LubriMatic Grease Gun # L30200 and Bearing Packer # ALL647646.
    view full answer...
  • Grease Recommendation for Curt Q25 Fifth Wheel Hitch
    Hey Time, according to Curt the recommended grease for your Curt Q25 fifth wheel hitch is a high-pressure wheel bearing grease. For this I recommend the LubriMatic Wheel Bearing Grease # L11465.
    view full answer...
  • Will the Dexter Trailer Idler Hub Assembly 34822545BX Work with a 14 Inch Diameter Wheel
    If you have 14" wheels on your trailer then you will want to use the Trailer Idler Hub Assembly part # AKIHUB-545-2-LFEZ-1K instead of the Dexter Trailer Idler Hub Assembly part # 34822545BX. The Dexter Trailer Idler Hub Assembly is only rated for use with 8" to 12" wheels whereas the Trailer Idler Hub Assembly is rated for use with 13" to 15" wheels because it has more of a surface area on the hub face. Unfortunately, we don't have any pre-greased hubs that will work for you but greasing...
    view full answer...
  • How To Install New Bearings and Seals on a Trailer Hub/Drum
    In order to install the bearings, races, and seals that come with the Titan 5 on 4-1/2 Complete Hub-and-Drum Assembly part # T1544500042 you can use the video I have attached for you on the Trailer Hub and Drum Assembly part # AKHD-545-35-K. This is a different hub/drum yes but the install process will be the same. Please note that in order to properly grease the bearings you are going to need a bearing packer like part # L70025 as well as some grease like part # L11465. The Installation...
    view full answer...
  • Trailer Hub Assembly And Spindle Recommendations For 2000 LB Axle
    You are correct. The parts you listed, Trailer Hub Assembly, part # 8-258BTUC1, and TruRyde Trailer Spindle, part # TRU97FR, will work well together. You will want to make sure your wheel shave a 5 on 4-1/2 bolt pattern. I have attached a helpful article that explains how to measure the bolt pattern on your wheels. These are designed for a 2,000 lb trailer axle. You want to make certain the spindle is installed by a certified welder. The new spindle must be absolutely square with the axle...
    view full answer...
  • How Do You Know When to Add Grease to Bearing Buddies on a 5th Wheel Trailer
    Some Bearing Buddies have an Auto Check feature that uses a blue ring that will be flush with the top of the cylinder when full of grease. If it is not at the top you would add grease until the blue ring is pushed outward. If your Bearing Buddies do not have this feature you would just need to insert grease using the fitting at the end until grease starts to ooze out from the front of the hub. If grease leaks out of the back then that indicates that the seal is likely blown and will need...
    view full answer...
  • Needing Wheel Bearing Kits for Lippert 5,200 Lbs Axles
    We carry two different wheel bearing kits for 5,200 Lbs axles. The difference between the two set is in the inside diameter of the grease seals. One kit, # BK3-300, uses a grease seal the measures 2-1/4 inches I.D. The other kit, # BK3-310, has a seal the measures 2-1/8 inches I.D. You will need to measure your current seals to see which kit will work for your application. Both kits will include bearings, seal, and race cups. One kit per wheel. I also recommend LubriMatic Bearing Packer,...
    view full answer...
  • Recommended Stub Axle Wheel And Tires For 200 lb Restroom Trailers
    For your restroom trailer stub axle and wheel/tire kit request, I recommend the TruRyde BT8 Spindle 1-1/2" Square for 2,000 lb. Trailer Axles # TRU97FR. This will give you a flat surface for welding. For the hub assemblies, I recommend the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # AKIHUB-440-2-1K. This assembly includes the bearings, races, seal, and grease cap. You will also want grease like # L11465. For your wheels, I recommend the Kenda 4.80/4.00-8 Bias Trailer Tire...
    view full answer...
  • Recommended Grease To Use with Bearing Kit for BT8 Spindles
    The Prime Guard Wheel Bearing Hi-Temp Red Grease part # L11380 for the can or part # L11465 for the cartridge is what I recommend using with any of our wheel bearings such as the Bearing Kit with Grease Cap for BT8 Spindles part # DL21792. In order to lube the bearings you will need a bearing packer, the LubriMatic Deluxe Bearing Packer part # L70025 is simple and easy to use.
    view full answer...
  • Parts Needed to Add Brakes to Lippert 3500lb Axle on an Utility Trailer
    We have the parts that you will need to add brakes to you Lippert 3,500lbs axles. For the brake assemblies, I recommend the Electric Trailer Brake Kit, # AKEBRK-35-SA. This kit includes both the left and right brake assemblies and will bolt right to your 4 hole brake flange that is already on your axle. The brakes are self-adjustable and will only need an initial set-up at installation. The drums that you will most likely need will be # AKHD-545-35-K. This drum will include bearings,...
    view full answer...
    Image 1 for Image 2 for
  • Parts Needed When Adding Brakes to a 3,500 Lbs. Axle
    With a 3,500 pound axle you'll need brake flanges with a 4-bolt pattern like # 4-35. Your trailer may already have these and if so that's good. The brake flange needs to be welded to the end of the axle to support the brake assemblies. It will need to be welded perfectly straight for your brakes to function properly so the work should be performed by a certified trailer shop. For brake assemblies, I recommend # AKEBRK-35-SA Left and Right Side Brake Kit. This kit will include 2-10 inch...
    view full answer...
    Image 1 for
  • Is LubriMatic High Temperature Grease Better Than LubriMatic Marine Grease
    The difference between the High Temperature Grease, like part # L11465, and the Marine Grease, like part # L54FR, has to do with what they are used for. The high temperature grease is great for dry application where your trailer is not meant to be immersed in water. The marine grease, on the other hand, is made for trailers that will be immersed in water. It provides excellent corrosion protection under severe conditions caused by saltwater and air. They are both excellent types of...
    view full answer...
  • Recommended Grease for Trailer Brakes and Bearings
    There are many options out there. LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11465 is a great one. You can use it on disc or drum brakes. It can also be used to grease wheel bearings.
    view full answer...
  • Do the Wheels Need to Be Removed to Grease the Bearings on EZ Lube Axles
    If you are referring to the TruRyde EZ Lube Spindles like part # TRU74FR then the grease (zerk) fittings are located on the end of the spindle. If you have hub caps that do not have an access hole and require removal to gain access to the hub/spindle then yes the wheels will need to be removed but in most cases, the pilot hole on the trailer wheel is open and all you need to do to access the zerk fitting is removed the grease cap on the hub. For a wheel bearing grease I recommend using...
    view full answer...
  • How to Identify What Wheel Bearings and Grease Seals are Needed on Trailer Axles
    Pulling the wheels and hubs off of your 5th wheel trailer is the best option when trying to identify what wheel bearings and seals are installed. On the back of the wheel bearings there usually is printed a part number like # L44643. With these numbers you will be able to identify the correct wheel bearings on your trailer's axle. Using the attached FAQ article, match the bearing numbers and you will be able to find the correct bearing & seal kit for your trailer. In some instances...
    view full answer...
    Image 1 for
  • What would be the Best Option for an Axle to Install on a Small Trailer Frame
    I have a solution for you. However, with the 41 inch frame width, finding a one piece straight axle to fit this measurement will be difficult. I recommend the Timbren Axle-Less Trailer Suspension System, # ASR400S02. The Timbren axle-less system will mount to the frame of your trailer and will give you additional clearance under the center of your trailer. This system will replace the need for the leaf spring suspension. The Timbren system uses Aeon rubber springs that are will provide...
    view full answer...
  • Replacement Spindle and Hub For 3/4 Straight Spindle
    I recommend updating your axle spindles to the the BTR E-Z Lube Spindle # TRU44FR as we do not have hubs that fit a 3/4" spindle. This is the more common 1-1/16" diameter spindle and will allow you to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. This hub is a 4 on 4" bolt pattern and with the spindle above will allow you to fill your hubs with Grease # L11465 using a Grease Gun # L30416 through the rubber cap on the grease cap.
    view full answer...


< Previous
123. . .4



Do you have a question about this Lubricants Sealants Adhesive?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Michael B
Installed by:
Michael B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.