Replacement Spindle and Hub For 3/4 Straight Spindle
Question:
Do you have any trailer hubs 4 on 4 with 3/4 spindle.
asked by: Jack S
Expert Reply:
I recommend updating your axle spindles to the the BTR E-Z Lube Spindle # TRU44FR as we do not have hubs that fit a 3/4" spindle. This is the more common 1-1/16" diameter spindle and will allow you to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. This hub is a 4 on 4" bolt pattern and with the spindle above will allow you to fill your hubs with Grease # L11465 using a Grease Gun # L30416 through the rubber cap on the grease cap.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
LubriMatic Professional Pistol Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 7000 psi
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Where to Find Serial Number of Truxedo Tonneau for Replacement Tarp
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Weight Capacity of Dexter P-12 SLR SN: D5287869 Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Which Grease Seal for Trailstar Boat Trailer
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Rust Prevention
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs