Mounting Hardware is Not Holding the Lend-a-Hand # AM-200 on a 2011 Rockwood Ultra Lite
Question:
Hello! I have a 2011 Rockwood Ultra Lite 5th wheel camper. My Lend a Hand Folding Hand Rail Screws wont hold anymore? The Top screws tighten but are still lose. The bottom screws wont hold anymore. The bottom bracket has pulled away from the left side of the door opening. I see the 2 screw holes but I dont know how to screw back in the screws which just spin when I tighten them now. Like there is nothing for them to bite into to hold? I have thought about putting a Wall Anchor of some type in the holes, but I would need to drill a bigger hole for the Anchor to get in and even them will it hold the hand rail? What do you recommend?
asked by: Lynde B
Expert Reply:
Yes, it sounds like you need to install some anchors for your Lend-a-Hand # AM-200 or simply remove all of the hardware and move the mounting location up or down a few inches to avoid using the same holes. If you do move the Lend-a-Hand then you want to make sure that you are installing the screws into a stud and that you patch up the previous mounting holes with sealant like part # LT37464.
It might be easier to move the hand rail location but since both options are fairly easy it really just depends on if you think you can install the anchors properly and if you want your rail to stay in the same location or not.
Products Referenced in This Question
Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube
- Lubricants Sealants Adhesives
- Sealant
- Gasket Maker
- 2.7 oz
- Loctite
more information >
Product Page this Question was Asked From
Lend-a-Hand Folding Grab Handle for RVs - White Rail with Black Foam Grip - Aluminum
- Accessories and Parts
- RV and Camper Steps
- Grab Handles and Handrails
- Folding Handle
- 24 Inch Long
- White
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Stromberg Carlson RV and Camper Steps AM-200 Review
- Video: Camco RV and Camper Steps CAM42176 Review
- Shop: Camco Fold-Away RV Grab Handle - Aluminum - White
- Shop: Replacement Hardware Kit for Stromberg Carlson Lend-A-Hand and Mini Lend-A-Hand Grab Handles for RVs
- Shop: Lend-a-Hand Folding Grab Handle for RVs - White Rail with Black Foam Grip - Aluminum
- Shop: Lend-a-Hand Folding RV Handrail - White w/ Black Foam Grip - Aluminum
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer brake controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer jack
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Choosing the Right Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Shop: Suspension Enhancement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: Difference Between 7-Way Round and 7-Way Blade Connectors
- Search Results: trailer hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Fifth Wheel Hitch
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Search Results: air bags
on Accessories and Parts
