Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey, everyone. I'm Ellen here at etrailer.com and today, we're taking a look at the two and five-sixteenth inch gooseneck coupler head. This is going to be a weld-on head for your outer tube of your gooseneck, so that you can get that connected to your gooseneck ball. It's going to be made of a durable steel and does not have any coating on it so you could weld that in place on your gooseneck. The cup here, again, is going to fit a two and five-sixteenth inch diameter ball. Has this locking pin.
You push that forward, and push that forward and then rotate it back. Kind of an old school style there. Pull that pin out. The pin is going to have a half inch diameter. You see there.
The pin length, or usable length, is about three and a half inches. Overall length from outside edge to outside edge is about four and seven-eighths inches. Then the keeper, outer edge to outer edge, it's about the same, about four and seven-eighths inch.Customers have really great things with this. It's pretty simple, pretty straightforward. We'll give you a measurement of the base here so you can see what size it can weld up to.
It does have a 30,000 pound capacity. Of course, you want to always go off with the lowest number of any component in your system. You don't want to overload your truck or anything like that. The outer diameter here on our base, it's about four and seven-eighths inches and that's going from the very edge of one side to the edge of the other. Hold this up so you actually can see that.
Just about four and seven-eighths inches. Four and a half inches, anywhere down from there should work out just fine. The height or depth, about three inches.That's pretty much going to do it for our look at the two and five-sixteenth inch gooseneck coupler head with lock pin. If this doesn't quite do it for you, we do have other configurations available here at etrailer.com, so definitely check them out if you're interested. Thanks for watching. See you next time.
Average Customer Rating: 4.8 out of 5 stars (78 Customer Reviews)
Easy ordering. Informed as order was shipping. Received product quickly and as described.
Great solid product
Very good product so far. Easy to weld and connect to the ball. The inside is a bit rough from the casting. Not sure how that is a negative or positive to hold grease.Pulled across the scale with @41k trailer. I reduced load after that but the coupler held, or should I say my welds.
Great affordable product I fabricated a gooseneck adapter for my fifth wheel toy hauler
great product. great already installed and used! recommend etrailer parts to anyone.
Dan D.
2/20/2018
Great
I ordered this inexpensive gooseneck coupler from etrailer. It shipped the same day, and was at my door a day sooner than they said it would be. It is a weld on coupler head and is just what I wanted.
Thank you: Ray.
In my case I have a stake truck so this weld on coupling is the minimum height so my trailer travels level, and still adjust down for pickup beds.
Good product, I use them on me on my farm implements, it's the only type ball coupler that that will hold up to that heavy of use
I like the products I like how fast the service was I am going to start buying all of my trailer supplies from you guys thank you very much A B Enterprise inc
Simple and looks like quality
Just what I needed to replace coupler on my trailer. Got it welded on and it works great.
Good price
Quick shipping
Great product and service. prompt shipping. Really heavy duty for of highway application.
Good coupler for the money, easy to install, fast shipping. Very pleased.
easy ordering and fast shipping. product was exactly as described and worked great. was really glad to see no rust on product which helped the welding process. thank you
Worked great
Excellant coupler head, exactly what I was looking for, for this project. When you can't find what you need locally, this is an invaluable alternative. Very good people to work with and fast.
Pete J.
Worked great for my project. Did not have an issue welding. Used a mig welder at 125 amps for 1st pass. 180 amps on second pass for good penetration.
Great product and super service. Fast shipping a plus. Keep up the good work.
Great product have been using one for quite some time, works great.
Exactly what we needed
Good product just as pictured and fast shipping. thank you
Perfect! Its so nice to have the exact part I need,come right to my door.
Great product, helpful staff
an older type but for use was just right
Do you have a question about this Gooseneck Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Britt
8/27/2017
Great, got my delivery in a day sooner than I thought