Filter Products
Filter Results
$218.69 - $1,208.99
$265.33 - $1,255.49
Filter by Tube Shape
$218.69 - $1,208.99
$265.33 - $1,255.49
Videos
for Gooseneck Coupler
Help Articles
for Gooseneck Coupler
Expert Answers
for Gooseneck Coupler
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.
view full answer...I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque,…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s,…
view full answer...We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will need to be either…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…
view full answer...Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…
view full answer...Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY83XR is specially designed to work with the Ram factory puck system. It will push the connection point for the gooseball and your trailer back 5" towards your tailgate.…
view full answer...Instead of using the Hydraulic Brake Kit #AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right #T4423400 and Left #T4423500. These will fit with your…
view full answer...The Shocker Hitch Air Cushioned Gooseneck Coupler part #SHK46MR that you referenced can be used with the 4 inch B and W offset ball part #BWGNXA4085 that you mentioned. In fact, the picture we got from Shocker Hitch that I attached to this page shows…
view full answer...The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 measures 4-1/2 inches in diameter on the outside and the Safety Chains #AM3109 fit around the adapter, as you can see in the accompanying photo. So as long as your gooseneck…
view full answer...I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and inner tube of the standard…
view full answer...