Of What Material is Redline Gooseneck Coupler Head 291300 Made

Question

Question:

My welder needs me to find out if this is cast iron or powered coated steel.

asked by: Natalie

0

Expert Reply:

The Redline Gooseneck Coupler Head # 291300 includes a steel pin to secure the 2-5/16-inch hitch ball but the overall cast assembly is made of uncoated cast steel. It offers a 30K capacity.

expert reply by: Adam R

0

Answer 1

The 2-5/16 inch Gooseneck Coupler Head with 1/2 inch Lock Pin, 30,000 lbs., item #291300, is cast construction and will require that a qualified weldor with experience in welding cast materials be utilized to attach the coupler to your equipment.…

view full answer...

Answer 2

According to the manufacturer the Gooseneck Coupler Head Kit #GC-HEAD is made from mild cast steel.

view full answer...

Answer 3

I spoke with my contact at Redline about the Gooseneck Coupler Head, part #291300. They said the mounting orientation of the pin should not make any difference when installed. My recommendation would be to mount it so that the pin is the easiest to…

view full answer...

Answer 4

You would need to replace the gooseneck coupler with one that has a 2-5/16 inch ball size. For that the B and W Gooseneck part #BWGNC4251 is a very popular option that would work well. It has an adjustable height tube and comes with a integrated…

view full answer...

Answer 5

The Bulldog BX1 Gooseneck Coupler #BD1289200300 you ordered already has a coupler installed so you will not need to get another one. I included a video of the #BD1289200300 for you to take a look at.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 12

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Of What Material is Redline Gooseneck Coupler Head 291300 Made

Product Page this Question was Asked From

Continue Researching