Recommended Custom Length Load Beam for E-Track Systems

Question

Question:

Can I Make it shorter?

asked by: Albert P

1

Helpful Expert Reply:

The E-Track Aluminum Load Support Decking Beam EM08905 is only adjustable from 92-103 inches. For a custom size beam, I recommend the E-Track Wood Beam Socket for Standard 2" Lumber # 59149. This allows you to lock your brackets into your track and then add a wood support of custom length.

expert reply by: Jason S

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 7

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 8

The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Yes, it will! The B&W Continuum Weight Distribution Head Assembly item #BW48FR will work perfectly with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...

Answer 11

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 12

For suspension enhancement on your 2022 Ford F-150, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD. The RoadActive leaf spring enhancement is a better choice than air bags because the leaf spring…

view full answer...