Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Confirmed to Fit
2010 Subaru Outback Wagon
excluding Sport
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (966)
- Q & A (0)
- Photos
- Used (1)
2010 Subaru Outback Wagon - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- CURT
- Converter
Install a 4-way flat on your Subaru Outback Wagon with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (966 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Scott 05/20/2024
Overall easy to install. Takes a few hours. The instructions could use updating. Vehicle years and trims (bulbs vs led) had wire colors that didn’t match any instructions or videos.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Doug05/08/2023
I installed this item on my 2023 Hyundai Palisade and it did not go very well. The blue wire connectors that came with it are terrible and should not be used. Taillight wires on vehicles with LED lights are extremely thin and the blue connectors do not pierce thru the insulation and into the wire. Over half of the lights didn’t work and I had to spend way too much time figuring out where the problem was and then making new connections. I cut and soldered the connections to get the lights working.
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
25
967
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Trailer Hitch and Wiring Recommendation for a 2010 Toyota Tundra TRD SPORTI spoke with my contact at Draw-Tite and he stated that hitch # 41935, fits all models of the 2010 Toyota Tundra, including the TRD Sport models, as long as it did not come with a factory trailer hitch. You could also use Curt trailer hitch # C15398. I have included links to the installation instructions for each for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and a carrying bag....
view full answer... - Trailer Hitch Receiver and 4-Way Wiring Harness Confirmed to Fit 2022 Volvo XC60 Recharge HybridYes, the Curt Trailer Hitch Receiver # C92WR is confirmed by Curt to Fit all trims of the 2022 Volvo XC60 including your recharge hybrid. I recommend installing the Wiring Harness # C59236 when you install the receiver. This 4-way connector will allow you to control the trailer lights.
view full answer... - 4-Way Vehicle Wiring Harness Needed For a 2022 Hyundai Santa Cruz SELThe are only 2 ways to confirm if the Curt T-Connector Vehicle Wiring Harness # CU94FR will fit your 2022 Hyundai Santa Cruz. First is by removing the underbody panel by the spare tire to see if there is a connector present. The second would be to contact your dealer with your VIN number so they can check the wiring schematic for your specific Hyundai to ensure the connector is present. If your Hyundai does not have the connector present you'll need the Curt Powered Tail Light Converter...
view full answer... - Visibility of the Curt Class I Hitch on a 2009 Volvo S40We have not had a chance to install this hitch on a vehicle like your 2009 Volvo S40, but I spoke with my contact at Curt and he said the majority of this trailer hitch will not be visible. The top of the receiver will sit flush with the bottom of your bumper fascia. He did mention that you may be able to see the bottom part of the mounting arms that extend just past the crossbar on both sides. I have attached installation instructions for you to check out. If you plan on doing any light...
view full answer...
- Trailer Wiring Harness Fitment for a 2021 Chrysler Pacifica HybridThe Curt T-Connector Vehicle Wiring Harness # C56322 is a fit for some 2021 Chrysler Pacifica models but since you have the Hybrid you'll need a splice-in connector like the Curt Powered Tail Light Connector # C59236. This will need to be spliced into your OEM wiring so if that's something you aren't comfortable with then you might see if a local shop will be willing to do the installation for you.
view full answer... - Trailer Hitch Fit for 2019 BMW X1For your 2019 BMW X1, I recommend the Curt Trailer Hitch Receiver # C13303. It will be a great class III hitch with high tongue and towing capacities. For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # C59236. It is also strongly recommended you use Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector, which will increase its durability and extend its lifespan. I...
view full answer... - Finding Someone to Install Trailer Hitch on 2019 Volvo XC60Since we aren't familiar with your area the best solution I can give you for finding someone to install the EcoHitch # EH95VR and wiring kit part # C59236 on your 2019 Volvo XC60 is to check with mechanics and garages near you that have solid reputations. Hitch installs are very basic for mechanics based on what they normally work on, so the install does not take a specialist by any means at all.
view full answer... - Recommended Trailer Hitch for 2022 Volvo XC60Yes, we do, I recommend the Curt Trailer Hitch Receiver, # C92WR. This is a Class III hitch with a 2" receiver that uses existing holes in the Volvo's frame for a no-drill installation. This is a hidden design meaning that only the receiver is visible once installed. If you intend to use for towing and not just a bike rack or other accessories, I suggest the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. For a ball mount I suggest the etrailer Ball Mount...
view full answer... - Installing Draw-Tite Class III Trailer Hitch # 75087 on 1998 Mercedes-Benz ML320I have looked over the instructions, and despite the 10 out of 10 installation difficulty rating, I believe that if you have average mechanical ability, you should be able to complete the install without any problems. On a 1998 model, it appears that there are only 4 bolts holding the bumper fascia in place. Once those are removed, you can pull off the bumper fascia. The hitch itself is held in place by 4 bolts that will thread into nuts that have been welded behind the bumper structure....
view full answer... - Hitch, Wiring, and Brake Controller Recommendation for a 2010 BMW X5The trailer hitch for your 2010 BMW X5 that you would need is the part # 13077. For trailer wiring it sounds like you are looking for a way to install a 7-way at the rear of your vehicle and you don't have any trailer wiring at all. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. You would need to start with a modulate 4-way like the part # 119250KIT or the Curt # C59236. If you do have trailer brakes you...
view full answer... - Trailer Hitch and Wiring Recommendation for a 2016 Toyota TacomaFor your 2016 Toyota Tacoma the Curt hitch part # C13264 has been confirmed as a fit. As far as trailer wiring is concerned we do not hat have any fits that would plug straight into any Toyota harnesses at this time. As of right now (Feb. 2016), we only have universal kits that would need to get hardwired to your truck's taillight wiring like the Curt # C59236. I attached a link to the trailer wiring harnesses for your vehicle though that will always have the most up to date fits as we...
view full answer... - Where Does Red Wire of Curt Trailer Wiring Harness # C59236 WireThe red wire of the # C59236 would need to run to the stoplight circuit of your vehicle if it has separate turn and brake lights. Or if they are combined on the same circuit it would just get grounded. You may need a circuit tester like the part # PTW2993 to find the stop light circuit.
view full answer... - 2 Inch Hitch Recommendation for a 2016 Toyota Rav4 Hybrid LimitedI can help you get a 2 inch trailer hitch for your 2016 Toyota Rav4 Hybrid Limited. I recommend the 2 inch etrailer Hitch # e98864 for your Rav4 Hybrid Limited, because it is a no drill application and the best bang for your buck. If your looking to tow with your vehicle, the wiring harness I would recommend is the Curt # C59236. Some other items to consider if you plan on towing are a ball mount, ball, and pin and clip. The size ball will be determined by the size of coupler your trailer...
view full answer... - Trailer Wiring for a 2016 Acura RLXFor your 2016 Acura RLX, to add a 4-Way flat trailer connector at the back of the vehicle I recommend # C59236. This is a powered converter that attaches to the tail light wiring and the battery of the vehicle to protect the sensitive wiring on the vehicle.
view full answer... - Recommended 7-Way Trailer Wiring Harness and Brake Controller for 2023 Hyundai PalisadeIn regards to the wiring for your 2023 Hyundai Palisade, you'll need to go with a hardwire harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236. Then, you'll need an adapter, the 4 to 7-Way with 4-Wat part # ETBC7L which is designed specifically for the Curt Echo Wireless Brake Controller part # C51180. Unfortunately, there are no plug-in options for your vehicle currently as there is still an on-going issue on the manufacturing side of things...
view full answer... - Recommended Hitch for Best Ground Clearance on a 2023 Toyota CamryYes, we have had a couple of reviews for the Curt Trailer Hitch item # C11576 being successfully installed on a 2023 Toyota Camry XSE. This hitch is custom fit and bolts to your vehicle with included hardware. I really like the Curt hitch because it mounts right beneath your rear bumper trim. This conceals the hitch extremely well and helps with ground clearance. This will be beneficial when you are using an accessory like a bike rack. The Curt Trailer Hitch item # C11576 is a class I...
view full answer... - 4-Pole Trailer Wiring Harness Options for 2017 Audi Q7 PrestigeThe Curt hitch # C13277 is a confirmed fit on your 2017 Audi Q7 but the wiring harness # C55515 is not confirmed at this time. This harness does not fit any Audi models; it fits only U.S. vehicles that have an industry-standard round U.S. Car type connector, which is usually found under the rear bumper or tucked away behind the spare tire. The correct 4-pole wiring harness options for your 2017 Q7 are Curt part # C59236 and Tekonsha # 119250KIT. The Curt is a hard-wired installation and...
view full answer... - Parts Needed To Pull a Kayak Trailer with a 2006 Audi A6 WagonIn order to tow a trailer like the Malone MegaSport Kayak Trailer part # MPG535 with a 2006 Audi A6 you'll need the following: Curt Trailer Hitch Receiver part # C11344 Curt Class II Drawbar part # C45521 (Required by Curt for Above Curt Trailer Hitch) TowSmart 2" Hitch Ball part # TS54FR Curt Class I and II Pin and Clip part # F-4 Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 The Spare Tire for Malone MegaSport Kayak Trailer part # MPG540 will then...
view full answer... - Trailer Hitch and Wiring for 2012 Mercedes Benz GLK 350 for Rental TrailerWe have hitches for your 2012 Mercedes Benz GLK 350 that would work great for towing a small trailer like the Draw Tite part # 75774 which has higher towing capacities and the easiest install. I attached an install video for you to check out as well. Then for trailer wiring you'd want the part # C59236 as well. The rental company will let you borrow a ball mount that matches the trailer so that would be covered.
view full answer... - Best Trailer Hitch for a 2004 Volvo XC70I do have a trailer hitch receiver that will fit your 2004 Volvo XC70 but it has a 1-1/4" receiver tube opening, not a 2" receiver tube opening. They do not make one with such for your Volvo and the Curt Trailer Hitch Receiver part # 13559 that you referenced will not fit. The correct trailer hitch I recommend for you is the Curt Trailer Hitch Receiver part # C12318 which as previously mentioned has a 1-1/4" receiver tube opening. The 1-1/4" receiver tube opening however can still do mostly...
view full answer...
- Both Signals Blink When Activating Left Turn Signal After Installing Curt Converter C59236Really the only reason that both the right and left signals would blink when you activate the left turn signal is insufficient ground on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236. You want to make sure the ground of the wiring harness is attached to a clean bare metal surface of the Audi's frame free of paint or debris. I have attached a helpful article on 4-way wiring for your reference.
view full answer... - Does the Curt Trailer Hitch for a 2006 Saab 9-5 Come with Trailer Wiring and Draw BarThe Curt Trailer Hitch Receiver part # C11831 is the only available trailer hitch option for a 2006 Saab 9-5. It does not come with any trailer wiring or ball mounts/hitch balls because not all those who use a trailer hitch do so for towing. That said, we do have all these parts you need. The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 is what you need to operate the trailer lights and the Curt Class II Drawbar part # C45521, Curt Class I and II Pin...
view full answer... - Will The Hands Free Lift Gate Operate With Curt Trailer Hitch Receiver On a 2023 Acura MDX?Yes, you will still be able to use your hands free lift gate with the Curt Trailer Hitch Receiver # C22HR installed on your 2023 Acura MDX. The sensor is offset from the factory as they designed it to work with the factory receiver as well. I recommend installing the Vehicle Wiring Harness # C59236 when you install the receiver. This is a custom fit wiring harness which will use the factory connectors to install on your 2023 Acura MDX.
view full answer... - Will Hitch from Older Acura MDX Fit 2022 ModelThe 2022 Acura MDX is the first model year of the 4th generation of the vehicle, while the Curt # C13146 fits the 3rd generation model, which is the 2014-2020 model year, so it won't fit your 2022 MDX. For the 2022 Acura MDX, you'll want to use the Curt # C22HR Class III hitch you'd looked at. The hitch will fit models with an 18 inch or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle. If you'll be using the hitch for towing purposes,...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.