4-Pole Trailer Wiring Harness Options for 2017 Audi Q7 Prestige
Question:
Installed Curt receiver #13277 but the Curt electrical #55515 does not seem to be correct. A little research led me to this. Questions: 1. Is my Q7 pre-wired? IF so where do I find the rear connection? 2. Is this the part for me? Where can I see install instructions and v video? 3. Will this interfere with the foot-activated hatch open/close? I am unable to get much info from Audi - but did get the followi statement on their parts web site Alternatiie rear diffuser is required for installation of hitch on models equippped with foot-activated hands-free release.S-Line 4M0807434kRU6 non S-line:4M0807434KA8. ??? HELP PLEASE
asked by: Mw S
Helpful Expert Reply:
The Curt hitch # C13277 is a confirmed fit on your 2017 Audi Q7 but the wiring harness # C55515 is not confirmed at this time. This harness does not fit any Audi models; it fits only U.S. vehicles that have an industry-standard round U.S. Car type connector, which is usually found under the rear bumper or tucked away behind the spare tire.
The correct 4-pole wiring harness options for your 2017 Q7 are Curt part # C59236 and Tekonsha # 119250KIT. The Curt is a hard-wired installation and the Tekonsha uses clip-on sensors instead of hardwiring. Both kits use a separate 12V power wire that runs to the car's battery to deliver the actual power to operate the trailer's lights. Installation videos for both kits are linked along with a helpful article with tips for routing that one wire that runs to the battery. Given that you have a new premium vehicle I suggest the Zero-Contact kit # 119250KIT. Since this completely bypasses the OEM systems, you will not need to visit the dealer for anything.
Hitch installation can affect operation of some of the sensors in an automatic lift gate system. This usually means no more than that you will need to use the outside sensors (not the ones in the center near the hitch) to activate this handy feature.
We have no experience with using the alternate diffusor part in a hitch installation on this vehicle so you might want to see how the lift gate works without it before deciding on that additional expense.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 700 lbs TW
- 7000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Install 4-way Trailer Connector In 2021 Toyota Highlander XLE Without Factory Tow Package
- Q&A: How To Select The Correct MORryde AllTrek Equalizer For a Tandem Axle Trailer
- Q&A: Recommended Wiring Harness for a 2014 Jeep Grand Cherokee Without a Tow Package
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Can Demco Classic Base Plate Kit # DM9518112 be Used with Blue Ox Tow Bar
- Q&A: Best Hidden Trailer Hitch Recommendation for 2020 Dodge Durango
- Article: Trailer Wiring Diagrams
- Article: Performance Chips and Modules
- Article: Trailer Hitch Installation Tips
- Article: Flat Towing Package for 2008-2011 Honda CR-V