bing tracking image
Q & A Icon

Best Trailer Hitch for a 2004 Volvo XC70  

Question:

Main thing I would tow is a 17 foot camper that weighs about 2800lbs, maybe 4-5 times a year. Now I understand that class II hitch can handle that, but I would like to go with a 2" receiver just because I already have bunch of other accessories that are all 2" as I had an F150 that had a 2" receiver. In other words, do you have any other hitches that are class III with 2" receivers or maybe even class II with 2" receivers?

0

Expert Reply:

I do have a trailer hitch receiver that will fit your 2004 Volvo XC70 but it has a 1-1/4" receiver tube opening, not a 2" receiver tube opening. They do not make one with such for your Volvo and the Curt Trailer Hitch Receiver part # 13559 that you referenced will not fit. The correct trailer hitch I recommend for you is the Curt Trailer Hitch Receiver part # C12318 which as previously mentioned has a 1-1/4" receiver tube opening.

The 1-1/4" receiver tube opening however can still do mostly everything a 2" receiver tube opening can, just at a lesser capacity. For example, if you wanted to tow a trailer then you could still do so and your towing capacity would not be limited by the trailer hitch.

If you can tell me what you will be using the trailer hitch for I would be glad to make some additional recommendations for you.

expert reply by:
0
Conner L
click to enlarge

James

1/17/2019

Main thing I would tow is a 17 foot camper that weighs about 2800lbs, maybe 4-5 times a year. Now I understand that class II hitch can handle that, but I would like to go with a 2" receiver just because I already have bunch of other accessories that are all 2" as I had an F150 that had a 2" receiver. In other words, do you have any other hitches that are class III with 2" receivers or maybe even class II with 2" receivers?

Conner L.

1/17/2019

Unfortunately, they do not make a trailer hitch with a 2" receiver tube opening for a 2004 Volvo XC70. In order to tow a trailer with your Volvo XC70 you will also need a wiring harness and ball mount/hitch ball. For a wiring harness I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 because it comes with everything you need for installation save for a circuit tester. For a ball mount/hitch ball I recommend the Curt Class II Drawbar part # C45016 with the 2" Hitch Ball part # A-82 or the 1-7/8" Hitch Ball part # A-80.

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>