7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
Item # HM40975-11933
Our Price: $93.62
Confirmed to Fit
2004 Dodge Dakota
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (53)
- Q & A (0)
- Photos
2004 Dodge Dakota - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- Pollak
- No Converter
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Dodge Dakota's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
Specs:
- Application:
- Replaces factory 7-way connector on trucks and SUVs
- Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
11-933 Pollak OEM Plug Adapter
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Vehicle End
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter - HM40975-11933
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.by: Jimmy05/21/2019
1998 Jeep Cherokee
Mounted this on a 1998 Jeep Cherokee XJ with factory towing to replace the 7 pole round socket, the connection into the factory harness was plug and play, perfect fit, bracket easily mounted to my Heavy off road bumper, looks like it belonged there all along.
by: Inoh08/01/2021
Really fast shipping. Product just as described. The bracket is strong and sturdy.
by: Kirk 09/06/2023
Of course, price matters - and everything is too expensive right now, but what matters more is quality. I appreciate being able to contact someone (you), and get just what I’m looking for. The quality seems completely top notch, and I’m anxious to get this installed and start using it.
by: Scott05/29/2018
2017 Jeep Grand Cherokee
Found out I didn't need the wiring harness. The Jeep just plugged right into the back of the 7 way. was done in 7 minutes. Not knowing I didn't need the wiring harness would have save me $45.
by: A,Ramos07/03/2017
2015 Jeep Grand Cherokee
Thanks to the excellent customer service Rep (Nicole T ). I was able to install my trailer hitch and harness with ease. So easy my 7 & 8 yr olds did it. looks great on my 2015 Grand Cherokee limited. we can't wait to mount the bike rack and goooooo! Thank you too much Nicole T.
by: Terry03/04/2021
The kit was easy to replace. I had water intrusion and the connections were corroded. I am now getting the same fault code/warning on my truck a year later. Not sure if this replacement part has water / failed - need to remove once the weather warms up.
Tyler M.
3/4/2021
Hi Terry, Thanks for your feedback! When using these connectors, I would recommend using dielectric grease to help keep contaminates out of the connection points. Using Loctite Bulb, Lamp, and Electrical Connection Dielectric Grease, part LT37534 , will help prevent the corrosion of the connectors.
Helpful Links
by: Mike C09/09/2017
2017 Jeep Grand Cherokee
15 minute install. High quality craftsmanship. Would highly recommend!!! Incredibly clean install on a brand new vehicle
by: Sean M09/14/2020
Jeep Grand Cherokee
After one year the product is still performing well. The cable provided made it easy to attach it to my stock wiring harness on the Grand Cherokee.
by: Greg06/02/2022
This company have been nothing but understanding and professional. I ordered my parts for my new RV and they came through without a hitch. I liked that I could track the package along the way. Keep up the good work y’all
by: William04/22/2019
2018 Jeep Grand Cherokee
My 2018 Grand Cherokee didn't need the wire harness, so it cost me an extra 20 some dollars per part I didn't need, so jeep owners look under and see if you have a round plug in the back with a end cap on. No one tells you what to look for.
by: Bob01/25/2017
2017 Jeep Cherokee
Perfect fit on my 2017 Jeep Cherokee .
Bob
1/30/2018
This Product is working perfect ! Quick and easy installation, Well built to last. I recommend it to all who need to make a connection.....
by: Forrest 03/13/2020
2009 Jeep Wrangler
Perfect for replacing the factory connectors and mount on my 2009 Wrangler JKU
by: Bryan08/19/2015
Perfect, eliminates the need for adapto rs.
by: Elizabeth 12/21/2022
2012 Dodge Ram Pickup
The product is great, but it does not compare to your customer service. America’s greatest company! Thanks for all you do!
by: Al T04/20/2017
2008 Jeep Wrangler Unlimited
Simple plug for trailer connection, best price & quality I could find!
by: Richard11/23/2017
As advertised, plugged directly into my oem harness.
by: Gene J01/16/2017
1994 Chevrolet C/K Series Pickup
great. etrailer is always the best.
by: Brian03/16/2013
2012 GMC Sierra
Exactly as advertised! Perfect fit. Made the job easy.
Frank
8/9/2013
Have a 2008 F-250 . Can I just order the 7 pin and 4 pin connector without the bracket and pigtail. Thank you
by: John 12/02/2016
2015 Chevrolet Silverado 1500
All good speedy shipping thanks so much
John
12/2/2017
All good
by: Stevo09/21/2022
1995 Ford F-250 and F-350
Great product
by: Frank R.10/15/2016
Have yet to install the product. I simply wanted to compliment the exceptional assistance I received from Anthony who walked me through what I needed. Thank you!!
by: Robert06/22/2021
Makes a nice convenient hook up and protected from damage and weather.
by: Tim 07/12/2022
Delivery was very fast. I haven't had a chance to put the item onto my truck but as far as I can tell there should be no troubles.
by: Michael03/10/2020
Everything was delivered as expected w/o anything missing, plus nothing broken. Thank you very much for filling my needs.
by: David07/12/2021
Easy to install,great product.
25
53
Show More Reviews
See what our Experts say about this Pollak Custom Fit Vehicle Wiring
- 7 and 4-Way Trailer Wiring Recommendation for 2017 Jeep Wrangler UnlimitedYou will need to start with a 4-way (if you do not have one). For that you would want the # C55124. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. This gives you the ability to have a 4-way too. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller...
view full answer... - Trailer Wiring Harness & Brake Control Wiring for 2016 Jeep Grand Cherokee with/without Tow PackageIf your 2016 Jeep Grand Cherokee does not have a trailer connector at the back but is pre-wired with the factory tow package then you can add a 4- and 7-Way connector using # HM40975-11933. Please note: It may be necessary to see a local Jeep dealer to activate the tow package wiring circuit. Models that did not come with the factory tow package would need to use # 118727 to add the 4-Way and then # ETBC7 to add the 7-Way. For a brake controller, if your Jeep did come with the factory...
view full answer... - How to Clean the Contact Points of a Trailer ConnectorYou have a few options for cleaning the pins of a trailer connector. You could use a wire brush, some fine grit sandpaper, or even Coca-Cola and an old toothbrush. Coke does a great job cleaning corrosion believe it or not. You'll want to rinse the soda off after though since sugary drinks leave a sticky residue.
view full answer... - Do You Have the Bracket Separate From the HM40975 ConnectorI am sorry but at this time we do not sell the bracket separately for the HM40975-11933. We do have the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part number HM40975, available without the plug adapter wiring.
view full answer... - Recommended Brake Controller and 7-Way Connection for 2005 Jeep TJ Unlimited RubiconFor your 2005 Jeep TJ Unlimited Rubicon I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. This proportional brake controller has a 3-Axis accelerometer which allows you to mount the main unit in any position out of sight which means it won't be taking up space in your Jeep. The control knob can mount anywhere in your vehicle and allows for fast and easy adjustment. You will also need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR to...
view full answer... - What Size Spare Tires Will Fit Under My 2015 Dodge Durango With Draw-Tite Receiver?The Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR will fit your 2015 Dodge Durango with an 18" or smaller spare tire. The class IV receiver is capable of supporting up to 1,125lbs of tongue weight and towing 7,500lbs. With a weight distribution hitch the capacities are 900lbs of tongue weight and 7,500lbs towing. The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975-11933 will be the wiring harness that you want if your Durango came with the trailer wiring harness...
view full answer... - Trailer Wiring Harness Recommendation to Replace OEM Wiring on a 2004 Dodge Ram 2500We have a variety of replacement wiring connectors for your 2004 Dodge Ram 2500, like the Pollak # HM40975-11933 for a full replacement, the T-One # 118381 that tees in with a 4-Way, or the Curt # C55504 that plugs in behind the tail lights for power and signals. From what you're describing it sounds like you're wanting the Curt harness that essentially works outside of the OEM trailer wiring harness. Please note that while this will allow you to tow a trailer with a 4-Way quite easily,...
view full answer... - Installing Pollak Trailer Connector Socket HM40975-11933 on 2016 Jeep Cherokee TrailhawkThe Pollak 7- and 4-Pole Trailer Connector Socket # HM40975-11933 will plug in on a suitably-equipped 2016 Jeep Cherokee Trailhawk at the factory-installed OEM connector under the rear bumper. This is a direct replacement part for the OEM part. Since the harness portion of this part is fairly short (about 10-inches end to end) you should find the OEM connector very near to the original 7-way. We do not yet happen to have a video for this part on your exact vehicle. If your Trailhawk did...
view full answer... - Does Hopkins 7-Way/4-Way Kit # HM40975-11933 Fit 2016 Jeep Cherokee LimitedThe Hopkins 7-way kit part # HM40975-11933 is a fit for your 2016 Jeep Cherokee Limited. If the bracket on the factory hitch matches the opening of the bracket in the picture I attached it will fit and work well but if not you'd want to use the included bracket to mount the connector to bottom of vehicle bumper. No additional wiring would be needed to complete the install though.
view full answer...
- 7-Way Trailer Connector and Brake Controller Installation in 2018 Dodge DurangoThe 4 pole trailer connector on your 2018 Dodge Durango is likely aftermarket, but there's a chance the vehicle is prewired for a brake controller and a 7-way. Check under the dash to see if the vehicle is equipped with the connector for installing a brake controller. The connector, if it's present, would be located to the left of the steering column, near the top of the e-brake pedal. It'll usually be taped to a different wiring harness. If the connector is there, look under the vehicle...
view full answer...
- Troubleshooting No Trailer Brake Lights When Connected to a 2015 Ram 2500You are definitely on the right track, but when I looked up the online owner's manual for your 2015 Ram 2500 the F11 cartridge fuse is actually for the trailer brakes themselves which is a different circuit than the brake lights. For the brake lights you need to look at fuses F53 and F81 which carry the left turn/stop and right turn/stop light circuits respectively. If those fuses look good as well then you need to test the 7-Way connector on your Ram or plug your trailer up to a different...
view full answer... - Parts Needed To Add 7-way Connector To 2008 Dodge Ram 1500 Towing Small Travel TrailerSince your 2008 Dodge Ram 1500 does not have the factory 7-way connector, but has a 4-way connector you can easily add a 7-way connector using the # ETBC7. This will plug in to your existing 4-way connector and just require a few more connections. You will ground the white wire to the frame of the truck, run the blue wire to where you are planning on adding a trailer brake controller (If the trailer has trailer brakes, if it does not I would run the wire under the dash so it is there should...
view full answer... - Recommended Hitch and 7-Way Wiring Harness for a 2004 Dodge Ram 1500 w/ Tow Package Yes, the B&W Heavy-Duty Trailer Hitch item # BWHDRH25211 will fit your 2004 Dodge Ram 1500. It fits Dodge trucks with or without the factory hitch. This hitch is custom fit and bolts to your Dodge with included hardware. The B&W Heavy-Duty Trailer Hitch item # BWHDRH25211 is made in the USA and weighs 73 lbs. To replace your Dodge's 7-Way you will want the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket item # HM40975-11933. This will plug into your factory tow packages wiring...
view full answer... - Adding 4-Way Trailer Connector to 2016 Jeep Cherokee Trailhawk with OEM 7- and 4-Way ConnectorThe Hopkins Plug-In Simple Vehicle Wiring Connector # HM11142464 referenced in your question will plug into ports behind the driver and passenger side tail lights on your 2016 Jeep Cherokee Trailhawk to provide you with an additional 4-Way connector. Because it will be wired to different circuits than your existing OEM 7- and 4-Way connector both connectors can be used at the same time. It sounds like you are then looking for a way to integrate the new 4-Way into the OEM bracket on your...
view full answer... - Where is the Running Light Fuse for Trailer on 2013 Ram 1500From what I could find, the fuse is in the underhood fuse box next to the battery. Check the yellow 20 Amp fuse in location F29. That should be for the trailer running/parking lights. If I were you, then I would also check the Pink 30 Amp fuse in location F30. That is for the trailer connector itself, so it wouldn't hurt to make sure it is okay as well. There is also a 15 Amp Blue fuse in location F79 for your truck's clearance lights. This fuse shouldn't have any bearing on the trailer's...
view full answer... - What Vehicle Fuse Controls Trailer Interior Lighting and Can it be Bypassed On a truck the circuit that would control the interior lights of a trailer would be the 12-volt accessory trailer circuit. Sometimes this circuit doesn't come on unless the vehicle is running or with the key on so you might try doing that as well to determine if the circuit is "working." One solution that we recommend for a lot of people with issues with this circuit is to bypass the vehicle wiring and run a wire directly from the battery of the truck to the 7-way so that you can have...
view full answer...
- Converting 4-Way Trailer Connector to a 4- and 7-Way Connector on a 2017 Jeep Wrangler UnlimitedTake a look at how the factory 4-way of your 2017 Jeep Wrangler Unlimited is installed. Follow the harness to see where it plugs in. If it has a rectangular connector like the # HM40975-11933 plugs into then this will work for you. You also will need to add wiring using our # 5506 kit in order to install a brake controller. If your Jeep's 4-way doesn't plug in using that type of connector, or if you just want to run everything new instead of having to find the correct wires in the Jeep...
view full answer... - Wiring Harnesses For a 2007 Dodge Dakota With Factory Tow Connection PointsI have a few options for your 2007 Dodge Dakota that has the factory tow connectors. Be sure to check your fuse panel for the necessary fuses to power the trailer connector functions as they may have been left out from the factory. First is the T-One Vehicle Wiring Harness # 118381 which is only going to give you a 4-way flat connector. Second is the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM42190 that will give you a 7-way connector. Finally the 7- and 4-Pole Trailer...
view full answer... - Easy to Install Trailer Brake Controller for 2008 Jeep Wrangler Unlimited with 4-Pole WiringYes, we can help you with the items needed to upgrade the 4-pole wiring on the 2008 Wrangler Unlimited to a 7-way and to install a trailer brake controller. The Jeep does not have an under-dash port to connect a controller but we do have an option that will be very easy to install. For the easiest possible installation I recommend the Curt Echo # C51180 and 7-way upgrade/install kit # ETBC7L. If your Dad has a compatible smartphone then these two items are all that is needed to add the...
view full answer... - How To Have A 7-Way And 4-Way Connector On A 2008 Dodge Ram Without A Factory 7-Way PlugThe Pollak Custom Fit Vehicle Wiring, # HM40975-11933, is a replacement connector for the Dodge Ram trucks with the factory plug under the truck on the drivers side. If your 2008 Dodge Ram 1500 does not have the factory trailer wiring harness available, then you will need to use the Draw-Tite Wiring Harness, # 119178KIT, and the 7 and 4 Way Installation Kit, # ETBC7. That will give you the 7 and 4 Way connector at the rear of the truck. The part # 119178KIT wiring harness installs behind...
view full answer... - How to Add 7 Way Connector to 2011 Dodge Dakota with 4 Way Factory PlugThe 2011 Dodge Dakota came with a factory 7 way, so it's possible that you potentially had the 4 way installed aftermarket- but I have a way you can check. If your 4 way is plugged into a square plug similar to the one shown in the attached picture, you can use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933 which will leave you with an active 4 way and also add a 7 way connector to your factory wiring. If your 4 way isn't...
view full answer...
- How to Install 7-Way Connector on 2005 Dodge Ram 1500 with Factory 4-WayI do have a solution for you, but the # HM40975-11933 will not work since your 2005 Dodge Ram Pickup did not come with a factory 7-Way trailer connector. If what you're looking to do is upgrade your factory 4-Pole connector to a fully functioning 7-way, then what you need is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7. This will allow you to run your brake output, reverse light and 12V power wires, which aren't pre-wired from the factory on your truck.
view full answer... - Is Just Harness of Pollak 7- and 4-Pole Trailer Connector Socket HM40975-11933 AvailableYes we do. For just the harness of the part # HM40975-11933 you would want the part # PK11933.
view full answer... - Recommended Brake Controller for a 2015 Ram 1500 4x4The brake controller that I recommend for you to use with your 2015 Ram 1500 is the Tekonsha Prodigy P3 # 90195. This is a proportional brake controller which means it will apply the brakes on your trailer at the same time and with the same intensity that you apply the brakes to your Ram. The P3 is also very easy to setup and features an easy-to-read LCD screen which makes adjusting the different settings a little easier to navigate. This brake controller can be plugged into the connector...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Andrew K
Installed by:
Jeff D
Written by:
Tyler C
Video Edited:
Jacob T
Updated by:
Wilson B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
5/30/2018
If you do not need the wiring on your 2017 Jeep Grand Cherokee I recommend part # HM40975.
Helpful Links
Custom-Fit-Vehicle-Wiring/Hopkins/HM40975.html