Gen-Y Hitch Aluminum Loading Ramp Set - 14' Long x 15" Wide - 8,000 lbs
(10 reviews)
Price: $1,132.56
Gen-Y Hitch Aluminum Loading Ramp Set - 14' Long x 15" Wide - 8,000 lbs
Retail:$1,232.12
Our Price: $1,132.56
You Save: $99.56
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
- All Info
- Reviews (10)
- Q & A (0)
- Photos
Gen-Y Hitch Car Ramps
- Loading Ramps
- Car Hauler Ramps
- 168 Inch Long
- 8000 lbs
- Gen-Y Hitch
- Open Trailer
Get a safer, more gradual incline for loading your vehicle or equipment onto your trailer with these extra-long ramps. Serrated aluminum panels let your wheels get a grip, even in wet weather. And they resist rust. Each ramp can handle 4,000 lbs.
Features:
- Straight loading ramps let you load heavy vehicles or wheeled equipment onto your trailer
- Serrated rungs provide grip for your wheels, even if the ramps or wheels are wet
- Gradual incline lets you easily drive your vehicle up the ramps
- Extra-long surfaces reduce the required angle to load your vehicle
- Sturdy hooked ends attach to your trailer deck
- Curved bases keep the ramps at the ideal pitch for loading
- Aluminum construction is lightweight and corrosion resistant
- Made in the USA
Specs:
- Quantity: 2 ramps
- Weight capacity: 8,000 lbs (4,000 lbs per ramp)
- Ramp dimensions: 168" long x 15" wide x 3-1/4" thick
- Trailer deck height:
- 15" Minimum
- 36" Maximum
- Weight: 93 lbs per ramp
- 1-Year warranty
Hooked Ends Secure to Trailer
Each of these heavy-duty Gen-Y Hitch ramps has a large, sturdy hook welded to the top. These hooks tightly grab onto the edge of your trailer deck. With this secure grip, the ramps will stay connected to your trailer as you load your equipment.
Extra Long for Easy Loading
At 168", these Gen-Y Hitch ramps are long enough to maintain a gentle angle so that you can gradually drive your vehicle up and into your trailer bed. In addition, the slight incline will make it easier to maneuver your vehicle up the ramps, and it will exert less wear on your vehicle's engine than driving up a steep slope.
GH-16168 GenY Hitch Heavy Duty Aluminum Ramp Set - 14' Long - 8K Capacity - Quantity 2
Replaces GH-R168
Item # GH34FR
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Customer Reviews
Gen-Y Hitch Aluminum Loading Ramp Set - 14' Long x 15" Wide - 8,000 lbs - GH34FR
Average Customer Rating: 4.9 out of 5 stars (10 Customer Reviews)
Get a safer, more gradual incline for loading your vehicle or equipment onto your trailer with these extra-long ramps. Serrated aluminum panels let your wheels get a grip, even in wet weather. And they resist rust. Each ramp can handle 4,000 lbs.by: Hernandez01/27/2023
Great for loading 4,000lbs mini skid steer onto 450 flatbed truck.
by: David 01/25/2024
I purchased these 14 ft ramps to load my mini excavator on my flatbed truck. They're everything I was hoping for and lighter than the 8 ft steel ramps I've been using. I feel much safer with these ramps! Thank you for the best price I could find!
by: Anthony 09/07/2023
Absolutely life changing.. they double as seating and ramps for a 14 passenger landing craft.
by: Mick 12/07/2021
These are high quality ramps. I have used them to load/unload a large cadillac fleetwood and a chevy dually onto a deckover trailer with no problem. If you have a long vehicle to load, and are looking for a set of ramps that are long and wide, these ramps will do the job for you.
Mick M.
12/8/2022
Wonderful. I have also used these ramps as a temporary UTV bridge. These ramps still work and look like new.
by: Johnny 11/18/2023
they are very stout, great people to work with.
by: Stephen05/20/2022
These were special order and took a few weeks to ship. I ordered them well in advance of actually needing them, so no problem. Delivery was LTL, and they were wrapped together, so be ready to transport 200# from the curb.
I bought these ramps primarily to load a car with a *very* shallow angle of approach to my dovetail auto hauler. I really needed 16', but these ramps are the longest I can find. I make it work with jacks stands under the trailer and blocks under the rear wheels of the truck. Race Ramps ramp extensions might work, but I haven't tried them.
I am only loading 3200##, so while the construction is massive overkill for my use, the width is helpful for the long hike up the ramps to the trailer and gives space to correct a misalignment on the trailer.
For transport, I strap the ramps to the deck under the car. The fact these fit under the car (barely!) was a selling point for these ramps vs other options. If the ramps were any thicker, I would need to come up with a way to stow the ramps and have to move the bulky 100# ramps to the stowage location. As is, I just pick up one end of each ramp and shove it under the car.
The ramps are built *very* well. The welds are superb, and the construction solid. As expected for aluminum, after two years of being stored outside, there is no evidence of corrosion. I expect to use them for many years.
by: Dennis 08/15/2022
I bought the 14' aluminum ramps and I was able to load my 45 hp Cub Cadet Tractor with the front end loader and stone rake in back. The ramps was strong enough to loaf it onto my trailer. The length should be gradual enough for when I have my back hoe attachment on, it won't rub on the ground and break any hoses. Good price, good quality. Very pleased.
by: Wesley08/10/2022
They did what I need. Got some permanent deflection but nothing to worry about. They almost sit flat now.
by: Brian 02/14/2023
by: Kim 03/18/2021
10
10
See what our Experts say about this Gen-Y Hitch Car Ramps
- What Does the Gen-Y Aluminum Loading Ramp Set GH34FR Have On Either EndWe have some confusing pictures on our site for the Gen-Y Aluminum Loading Ramps part # GH34FR and I apologize for that. The actual ramp has a slot mount style on one end and a tapered end on the other which you can use either end depending on what you need to load into. So in your situation you would just need to use the flat end and you'd be good.
view full answer... - Ramps for Race Car Trailer for Car with 3.5 inch Ground ClearanceYes I would say a 12-14 foot long ramp would work great for a vehicle with 3.5 inches of ground clearance and trailer height of 19.5 inches like the part # GH34FR which is 14 feet long. Since your trailer does not have a lip for a ramp set your best option would be to install a trailer ramp channel at the rear of it which at this time we do not carry. It would not be an issue for the full weight of your vehicle to be on these ramps. The # GH34FR would work great for you.
view full answer... - Can 168" Long Gen-Y Hitch Aluminum Loading Ramp Set Be Used to Load Mower in TrailerThe 168" Long Gen-Y Hitch Aluminum Loading Ramp Set # GH34FR should work out just fine at a height of about 45". I did some calculating and you're looking at about a 15 degree angle from where the bottom of the ramp will sit. The end of the ramp will also be about 162" out form where they connect to the trailer. You should be able to mock this up at home and see what kind of slope you're looking at with this solution.
view full answer... - Weight of 14 Foot Aluminum Gen-Y Car Hauler RampsThe 14' long Gen-Y Hitch Aluminum Loading Ramp Set # GH34FR have a shipping weight of 188 lbs so when you take into consideration the shipping materials, these aluminum ramps are going to weigh approximately 185 lbs. The ramps have a combined 8,000 lb capacity and attach to your trailer via a hooked end.
view full answer... - How Thick is the Metal on the Hooks of the Gen-Y Hitch Aluminum Loading RampsThe hooked ends of the Gen-Y Hitch Aluminum Loading Ramps # GH34FR are going to be 3/8" thick. This ramp set will hold up to 8000-lbs total (4000-lbs per ramp) and are 14 feet long to provide a long angle of approach that is perfect for large, heavy equipment.
view full answer... - Which Side of Gen-Y Loading Ramp Is Angle CutSorry for any confusion, the angle cut on the Gen-Y Hitch Aluminum Loading Ramp Set # GH34FR is on the top of the ramp like you are wanting. The bottom cut version is for the shorter ramps. The top cut is over 18 inches long though so it's not an abrupt enough of an angle change to cause difficulty getting up them.
view full answer... - Weight Of Each Individual 14' Gen-Y Hitch Heavy Duty Aluminum Loading Ramp # GH34FREach of the Gen-Y Hitch Aluminum Loading Ramps in the Set # GH34FR weigh 94lbs.
view full answer...
Do you have a question about this Car Ramp?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Manda E
Updated by:
Justice A
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Hernandez
1/28/2024
Product is holding up like new. I load power equipment to my flatbed truck. Essentiall investment!