Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift - 10,000 lbs
(31 reviews)
Price: $333.86
Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift - 10,000 lbs
Retail:$437.50
Our Price: $333.86
You Save: $103.64
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (31)
- Q & A (0)
- Photos
Bulldog Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Landing Gear
- Sidewind Jack
- 9001 - 10000 lbs
- 1 Jack
- 26 Inch Lift
- Bulldog
- Weld-On
- Alloy Steel
This jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. Side-facing plunger pin and 28-1/2" retracted height. No need to reposition the hand crank (sold separately) to switch gears.
Features:
- Ideal for standard agricultural, construction and industrial trailer applications
- Eliminates repositioning hand crank to switch gears
- Planetary gearbox - slimmer profile than traditional gearboxes
- Low gear: Powerful, but takes more time - best when trailer is loaded
- High gear: Ultimate speed - best when trailer is unloaded
- Specially engineered alloys provide strength and stability
- Cuts time spent cranking, adjusting, and leveling in half
- Drop leg inner tube
- Built-in plunger pin positioned to the side
- Weather-resistant black paint inside and out
- Weld on installation
- Includes standard footplate
Specs:
- Lift capacity: 10,000 lbs
- Support capacity : 12,000 lbs
- Total lift: 26"
- Screw travel : 12-1/2"
- Drop leg travel : 13-1/2"
- Bracket height:
- Retracted: 28-1/2"
- Extended: 41"
- 2-Speeds:
- Low gear: 1" every 27 turns
- High gear: 1" every 9 turns
- Outer tube width: 4"
- Limited 5-year warranty
How to Determine the Support Capacity You Need in Your Landing Gear
If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity. But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity.
Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Note: Do not use landing gear to lift your trailer during tire changes or service work, because doing so will exceed the capacity of the landing gear.
183401 Bulldog 2-Speed Square Jack with Non-Spring Return Drop Leg, Planetary Gearbox, 12-1/2" Travel, 10,000 lbs - SWQ 183 DL-BX
Item # BD183401
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift - 10,000 lbs - BD183401
Average Customer Rating: 4.8 out of 5 stars (31 Customer Reviews)
This jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. Side-facing plunger pin and 28-1/2" retracted height. No need to reposition the hand crank (sold separately) to switch gears.by: Dean S.09/05/2017
had the old bolt plate cut off the single speed jack and welded on the new one.
Nice having a two speed jack that can lift even a loaded trailer.
Well pleased with this jack and will buy a new one (if this one ever fails)
by: Todd S05/19/2017
I'm using this jack on a 28 foot stacker trailer, along with an electric motor to operate it. It works fine, is easily deployed and very sturdy. I have had not problems whatever either with the jack or with etrailer with respect to this purchase.
by: Richard 08/14/2023
WORKS GREAT
by: Kelcey08/11/2023
QUICK AND EASY TO ORDER AND ARRIVED FAS T.
by: Shawn S. 02/15/2016
Got one of these and it had a sticky spot in the input gears. Emailed eTrailer and they sent me another one (which is perfect, by the way), and paid for the return postage of the defective unit. All this without me even having to ask!
Jack is about what I expected. Planetary unit is kind of notchy, but it looks like it will work as intended.
by: Eric03/25/2022
Bulldog makes a great product and survived what appears to be a very rough journey with UPS.
by: Jacob 09/01/2020
Was the exact jack needed. Came in on time a price was the best I found.
by: Katherine03/27/2013
nice jack. well built should do the job just fine
by: Sherryl01/06/2020
Great product. Jack works well.
by: Les 11/19/2022
by: Gerald08/19/2019
Product arrived in a heavily damaged box. Other than a few scratches product was in good shape. Since this jack is a weld on unit, it would be a good idea to supply the decals unattached as they do melt when welding. Have dealt with etrailer in the past and always receive great service and value.
by: Kenny S03/03/2016
After welding some mounting brackets onto the jack, mounting and hooking up the wires, was very simple. Bulldog makes a good product. Mark M. Was very helpful and knowledgeable enough about his product line to help get the right jack for my application.
by: Michael02/28/2022
Jack came in a timely manner. Installed on the front of a steel livestock 5th wheel trailer that is VERY heavy. Have owned it over a year now and still works flawlessly. In conditions that are less than ideal (mud, manure, gravel road grit, etc). Will definitely buy one again when needed and highly recommend.
by: Dave12/27/2020
Welded the new Jacks were I cut the old ones off the cross rod work with the new Jacks everything work out good if you need jacks this is the place to go
by: Joseph01/27/2018
I was very satisfied with the help of everyone's help when I ordered the bulldog 2-speed jack. Everyone was very helpful when I ordered the Jack on line, and the jack was shipped as promised and delivered via UPS. Everyone was knowledgeable and very helpful in selecting the jack for my application.
by: mark c09/22/2012
the two speed gear works great makes lifting my 42 ft goose neck easier than the stock jacks that came on it.if i was going to replace a jack i would definitely go with the two speed jack and e trailer is a great place to buy,very helpful and fast shipping i would recommend them
by: Pete from Michigan01/06/2011
My 1st 2 speeed UnitI have always been happy with the "Bulldog" brand products .... and was a little skeptical of the planetary gearbox and the "shifting" from High to Low.
I have no reservations now!!!! The unit works flawless!!! shifting is easy and "crisp"
This was my first purchase from etrailer, .... WoW I have bought from many on line stores ...... I have never seen the follow up, attention to detail and quality coorespondence that etrailer has demonstrated on this purchase!!!!!
I definately will have etrailer in my Favorites list!!!!!!!!
I have no reservations now!!!! The unit works flawless!!! shifting is easy and "crisp"
This was my first purchase from etrailer, .... WoW I have bought from many on line stores ...... I have never seen the follow up, attention to detail and quality coorespondence that etrailer has demonstrated on this purchase!!!!!
I definately will have etrailer in my Favorites list!!!!!!!!" />
by: Gary09/09/2022
its stuck in one gear and wont go into other gear
by: Lon O.01/12/2015
just finished getting this mounted on trailer, quality jack for sure.
will be buying more from etrailer.com.
by: Tony R08/29/2013
This 2 speed jack is just what I needed for my 32' stock trailer. Extremely fast shipping. Thanks.
by: Matt02/16/2023
Good prices. Very fast shipping!
by: HP01/20/2016
Good product, great service, pleased
by: Ranal02/11/2018
Allways happy with etrailer
by: Anne05/09/2017
We have used this product for a year and all is great. I ordered the jack and it was delivered the next day.
by: Linda 11/12/2021
Very satisfied a little slow but very g ood
25
31
Show More Reviews
See what our Experts say about this Bulldog Camper Jacks
- Availability of Bulldog 12,000 lb 2-Speed Trailer JackYes, for a Bulldog 12,000 lb static (10,000 lb lift) capacity we have the following jacks for you: Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift # BD183816 (front facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183416 (front facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183401 (side facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Traditional...
view full answer... - Replacement Electric Landing Gear for Horse TrailerSorry to hear your system broke and there aren't replacement parts available for your horse trailer. The Bulldog Velocity Series Electric Landing Gear Jack - 24" Lift - 12,000 lbs # BD185400 is a good replacement for your discontinued and broken system. It will simply bolt right on to your trailer so it can utilize the 12V power you already have run. It is able to lift 12,000 lbs and lifts 20 inches in 60 seconds. Another great option for you is the Bulldog Square Jack - Drop Leg w/...
view full answer... - Availability of a 10,000LB Capacity, 2-Speed Trailer Jack Without Drop Leg Return SpringWe do have the Bulldog 2-Speed Jack # BD183401 without a spring return. This is a 10,000lb lift capacity 2-speed jack similar to the etrailer # TJD2SP-12000SP-F jack you found. The Bulldog requires a separate Handle # BD701466 as one is not included. We currently do not have drill adapters for these larger jacks as they require more power than a drill can provide under load.
view full answer... - 2-Speed Electric Trailer Jack to Replace Manual Jack on 3 Horse Slant Trailer With Living QuartersThe Bulldog Square Jack you referenced, part # BD182400, is a weld-on single speed jack rated at 10,000-lbs lift capacity. This jack can be used with a single-speed power drive kit, part # BD1824200100. For two-speed operation you will need a jack with a two-speed planetary gearbox, such as Bulldog 2-Speed Jack, part # BD183401. With this jack you can use powered-Drive Kit # BD1824180100 but please note that my contact at Bulldog advised that when using the power drive kit on this jack...
view full answer... - Powered Jack Recommendation for Gooseneck Trailer with 10k Capacity You have a Bulldog jack on your trailer already so your best option would be the Bulldog 10k jack part # BD183401 with the powered drive kit part # BD1824180100.
view full answer...
- Recommended Roof Repair Tape for Trailer RoofsTo replace the sealant tape on the roof of your trailer, I recommend the Quick Roof Repair Tape for RV Roofs item # QR34FR. It is designed to work on EPDM, TPO, Hypalon, metal, modified asphalt, vinyl, fiberglass, PVC, OSB, rigid extruded polystyrene, wood, and tile. You will want to remove the existing tape so it can be applied to a clean, bare surface.
view full answer... - What is the Lift Capacity of the Bulldog 2-Speed Planetary Jack # BD183401The Bulldog 2-Speed Planetary Jack # BD183401 has a lift capacity of 10,000-lbs and a static capacity of 12,000-lbs. This jack includes the foot plate but not the sidewind jack handle; that is available as part # BD015181.
view full answer... - Bulldog 2-Speed Tandem Landing Gear Set Jack Recommendation for a 20 ft TrailerOur strongest landing gear jack that you could potentially use on your 20 foot trailer would be the Bulldog 2-Speed Tandem Landing Gear Set # BD500153. This jack has 45,000 lbs of lifting capacity and can handle 90,000 lbs of static weight. If you are tired of breaking jacks and want to be done with the hassle of having new jacks welded on I would recommend the # BD500153.
view full answer... - Recommendation for Adding 12K Electric Jack for Horse TrailerIt sounds like you have the older Fulton 12K Magnum Series HD Jack. Since there isn't a way to convert this to an electric jack you'll need to replace the entire jack. To get to your end result of having an electric jack for your horse trailer you will need to go with the Bulldog 2-Speed Jack # BD183401 (10K lift and 12K static capacities) and then use the Bulldog Powered-Drive Kit # BD1824180100 to make it electric. This setup does come with it's own gearbox so you wouldn't need to pick...
view full answer... - How Far Does Plunger Stick Out From Bulldog Jack BD183401 TubeWith the pin fully seated, it will stick out approximately 6-3/4 inches from the Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift - 10,000 lbs # BD183401.
view full answer... - Will Bulldog Jack and Powered Drive Kit Work Well on 4 Horse TrailerThe Bulldog Square Jack you referenced, part # BD182400, is a weld-on single speed jack rated at 10,000-lbs lift capacity. This jack can be used with a single-speed power drive kit, part # BD1824200100. For two-speed operation you will need a jack with a two-speed planetary gearbox, such as Bulldog 2-Speed Jack, part # BD183401. With this jack you can use powered-Drive Kit # BD1824180100. Either setup would easily do the trick for you.
view full answer... - Recommended Heavy Duty Two-Speed Electric Trailer Jack For Horse TrailerI do have an option for you, but there is not a single jack with a 12,000lb lift capacity that is electric or can be converted to electric. With that said I recommend going with the Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return # BD183401 which has a 10,000lb lift capacity and 12,000lb static capacity, and can be converted to electric via the Bulldog Powered-Drive Kit for OEM 2-Speed Planetary Jacks # BD1824180100 you were looking at. Keep in mind that using the Powered-Drive Kit...
view full answer... - How is Different Gears Selected on Bulldog 2-Speed Jack # BD183401To change gears on the Bulldog 2-Speed Jack # BD183401 that you referenced you would push in/pull out on the shaft. This is how you go between the two speeds.
view full answer... - Foot Plate Size of Bulldog 2-Speed Jack BD183401The foot measures 10 inches by 9-3/4 inches for the Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift - 10,000 lbs # BD183401.
view full answer... - Options for Installing Powered-Drive Kit with Bulldog Landing Gear JacksThe Bulldog Powered-Drive Kit # BD1824180100 that you referenced is not compatible with landing gear like the Bulldog 2-Speed Jack, Traditional, 10,000 pounds # BD183901. My contact at Bulldog confirmed that there is not a motor kit available for the jacks with the triangular gear housing, like that on the # BD183901 landing gear jack. To be compatible with a powered-drive kit, you will want to update your existing landing gear with either single speed landing gear or 2-speed landing...
view full answer... - Can Bulldog 182425 be Used Instead of Bulldog 183401 for Electric Horse Trailer JackGreat question! The Bulldog Jack 182425 that you found is similar to the Bulldog 2-Speed Jack # BD183401 that I reference with the difference being that the 182425 has welded plates to the sides of the jack to bolt onto a trailer. The 182425 will also work with the Powered-Drive Kit # BD1824180100 that I mentioned earlier so you will be able to upgrade it to an electric jack if that's still your goal. I confirmed all of this with my contact at Bulldog.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Todd S.
5/19/2018
The jack and electric motor work great, no problems at all and what a treat to have the motor.