Availability of Bulldog 12,000 lb 2-Speed Trailer Jack

Question

Question:

Do you guys carry a bulldog 12K to speed leg Jack

asked by: Phil B

0

Expert Reply:

Yes, for a Bulldog 12,000 lb static (10,000 lb lift) capacity we have the following jacks for you:

Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift # BD183816 (front facing plunger pin)
Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183416 (front facing plunger pin)
Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183401 (side facing plunger pin)
Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Traditional - 26" Lift # BD183903 (front facing plunger pin)
Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Traditional - 26" Lift # BD183901 (front facing plunger pin)
Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Traditional - 26" Lift # BD183902 (side facing plunger pin)

The Replacement Gear Assembly for Bulldog 2-Speed 12,000-lb Jack, part # BD500295 is also available for these jacks.

expert reply by: Carla M

0

Answer 1

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 2

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 3

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Availability of Bulldog 12,000 lb 2-Speed Trailer Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching