Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
(338 reviews)
Price: $48.61
In Stock
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Item # TDHP
Our Price: $48.61
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (338)
- Q & A (0)
- Videos (3)
- Photos
- Used (1)
Brophy Accessories and Parts - TDHP
- Camper Tie-Downs
- Turnbuckles
- Bed-Mounted
- Brophy
- Standard Disconnect
- Powder Coated Steel
- Locks Not Included
- No Tension Indicators
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.
Features:
- Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck
- Works with Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, and HSCP)
- Sturdy steel construction
- Corrosion-resistant zinc-plated finish
- Kit includes:
- (4) 3/8" Hook-to-hook turnbuckles
- 4 S-hooks
- 4 Chains
Specs:
- Turnbuckle length:
- Extended: 12"
- Retracted: 7-5/8"
- Overall length when assembled (turnbuckle with chain and S-hook): 19-3/4"
- Weight capacity: 3,000 lbs
TDHP Camper Tie Down Hardware Package
Installation Details
Video of Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Camper Tie Downs Review
Today we'll be reviewing and showing you how the Brophy Stake Pocket Sliding Camper Tie Downs, part number TDSF, will fit on most trucks. These adjustable stake pocket tie downs will mount permanently in the stake tube of your truck for a tie down that is always ready to use. They have three removable spacer tabs that allow a custom fit for most pickups and a tab lock that anchors the tie down to the truck rail to prevent lifting and twisting. We'll begin our review by showing you how to install it onto our truck. To do this we'll slide the stake of the tie down into the stake pocket of our truck making sure that the black tab is facing the center of the truck bed. The spacer bars may need to be pried off if necessary to fit the size stake pocket of your truck.
Now with the tie down seated firmly in the pocket, we'll drill two 7/32-inch holes through the pocket about four inches from the top. Now for todays demonstration we will not be drilling and permanently securing this stake, but just showing you how to drill the holes and where. We'll then use the two lag bolts to thread into the holes that we just drilled putting pressure onto the stake. We'll now drill an 11/32-inch hole through the anchor tab and install the hex bolt. Now that we have our hole drilled through the bracket, we can move to the underside of the vehicle where you can see plastic paneling near the wheel well.
Removing this will allow you to open up a space for you to reach your hand up to thread on our washer and nut. You may need an extra set of hands when doing this part of the installation. Now with our camper tie down secured to our bed rail of our truck, we'll demonstrate how to tie your camper down with the tie down hardware package, part number TDHP, and we'll do this by taking the turn buckle, setting the chain on the hook on one end of the turn buckle, and then taking one of the s-hooks, putting the small end of the s-hook into the chain. We'll then take the other end of the s-hook and starting from the outside of the tie down which we'll slip into the hole, and with the camper positioned on to the tie downs you can simply turn the cam buckles which can either loosen or tighten to give you the best fit to your camper. Quick Tech Tip: Over-tightening the turn buckles may cause unnecessary stress to the camper and your truck.
That will complete todays review of the Brophy Stake Pocket Sliding Camper Tie Downs, part number TDSF.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4 - TDHP
Average Customer Rating: 4.5 out of 5 stars (338 Customer Reviews)
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.by: Nancy01/28/2024
These ties downs solved an immediate problem when I bought my new truck bed camper. However, the trim piece on my 2017 Silverado truck bed couldn't withstand the pressure of the camper. The camper was stable but the tie downs moved when tightened. Then of course I forgot to untie and even though I caught it immediately, the trim on the truckbed lifted. I since have read that these ties downs are better for older model trucks. Thus I can say they worked as a immediate solution but it would be a safer system to get the tie downs that connect to the bottom of the truck.
by: Ben04/06/2024
Seems to be good quality. Got these to replace my camper's rachet straps since they're less bulky, stronger, and allow me to tighten the camper down to my truck bed's D-rings better than the rachet straps (since with my particular truck and camper it was difficult to get the access and leverage to truly tighten them as much I wanted, and as a result the camper would drift during travel)
by: Mario06/12/2021
Got here early in the a.m. and on time before heading on a 2 hours trip. Easy install. I hoped the chains would be longer, I had to use 2 longer chains because of the position of the eye bolts on the camper.
by: Robert07/21/2023
They shipped one turnbuckle.
Jenny N.
7/25/2023
Sometimes we do make a mistake. I am sorry that we did not send everything that was ordered. I will have our Customer Service team reach out to you.
by: Terry Lee08/20/2020
Easy install, quality hardware, great fit for my camper/ 2006 Dodge Ram 1500 quad cab truck combo. I would recommend this company and it’s quality products . Safety is a big concern and these tie downs are as safe as can be.
by: John03/07/2024
Easy do order from with good communication , products are best quality out there
by: Joe 03/21/2024
arrived on time and in excellent condit ion
by: Henry 01/23/2024
Very good and very easy to install
by: James 02/09/2024
They work great.
by: Rocco 01/18/2024
Great service fast and knowledgeable.
by: Mike 05/09/2023
Brophy tie downs were just what I needed. Shipment was delayed twice once it left your facility.
by: Andrew03/31/2018
Easy to use, strong materials used. Worked great in combination with the brophy pocket tie down system. Its camping time!
by: Drew 09/04/2022
Great quality and price.
Drew
9/5/2023
Excellent no issues.
Mike L.
10/26/2023
@Drew We're happy to hear that your # TDHP turnbuckles are still working well for you!
by: Francisco06/30/2023
Worked perfectly holds down my six pac camper just fine
by: Pat 03/20/2023
A must have for your camper if you are using the Brophy style tie downs.
by: Phill S.08/24/2015
The tie-down hardware package worked great. Nice and flexible, for matching the camper's layout. I might replace the S-hooks with threaded chain repair links, but for now, teh kit was complete and worked fine.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Tom04/21/2023
Fantastic...........great quality.........great price.......great product........Thank YOU !!!!!!!!!!!!!!!!
by: Les 11/17/2023
Awesome quick shipping.
by: Jeremy09/13/2021
I paid extra money to have these turnbuckles delivered to me so I could go on a camping trip with my family. They came late and we had to cancel our camping trip. I tried calling customer service twice and no one answered.
Brooke M.
9/23/2021
Thank you for letting us know. Our customer service team should be reaching out to you in the near future.
by: Timothy 10/29/2022
Great selection, easy to shop.
One issue I noticed, is the quality of the screws used to mount the hardware.
It seems that with all the attention given to the actual hardware itself, it only makes sense to have better quality screws, etc.
They were cheap, not of high grade metal, and I had to go replace them.
I'd gladly pay a bit more, to get screws that are as good quality as the hardware.
All in all, though, I was satisfied...even if I had to source the screws myself at a Lowes store near me.
by: James06/08/2020
Have not actually used them yet, but they are sturdy and well positioned, and the installation was fairly easy, although I had to grind a very small (less than 1/8') off the bottom of the passenger side plate that goes inside the frame in order to get both bolts in. I don't have a camper yet, but may get the rear tie-downs, depending on size and weight of what I get. Will use bumper brackets for now. I did not think the bed mount type of tie-down would be enough for anything but a very light camper, and the through the bed into the frame type didn't appeal to me much. Not having to drill any holes was a plus, although I would have done it if necessary to get the strength I wanted. Although these tie-downs mount in a somewhat unusual way, I think they will be very functional, strong, and convenient.
by: nameless11/05/2014
I bought this set originally to buy a used camper from out of town and get it home. My plan was to buy something more permanent like Happijac. Once I put these on though, I decided they were plenty strong and would most likely work permanently so I'm going to run with that for a few months and see how they work. I am using spring loaded turnbuckles instead of these though.
They were easy to install and work with the factory bedliner that stops below the bed lip, no drilling is also a bonus.
My camper is a Hallmark popup 8ft long and weighs just under 1800 lbs.
by: Chad07/26/2023
Works perfect for what I needed
by: Jeff11/27/2016
Very strong brackets. Bolt holes could use "TWO" (with a little precision tolerance) slots to hold the bolts steady so the Nylock Nut doesn't twist and you have to use an end wrench.
Also, the brackets could be sold in a longer version of length so you can use a Heavier Duty Turnbuckle.
those are my only changes I would like to see. I really do like the versatility of the Brophy Tiedowns.
by: greg g01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
25
338
Show More Reviews
See what our Experts say about this Brophy Accessories and Parts
- Is a Jam Nut Needed for the Brophy Basic TurnbucklesThe Brophy Basic Turnbuckles part # TDHP don't require a jam nut as there is no way for the hooks to turn loose while they are attached to the tie-down points. Once tensioned, the body would not be able to turn either without force. The thread diameter of the rod is 3/8" if you want to use a jam nut of your own but it's not needed.
view full answer... - Can Turnbuckles Be Used Without the Chains and S Hooks Included in the Camper Tie Down Package TDHPI spoke with my contact at Brophy and they agree that it is okay to just use the turnbuckles without the chains and S hooks that are included in the hardware package.
view full answer... - Dimensions of the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-DownsThe Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs item # TDHP are going to be the shortest option we carry. With the hooks on the turnbuckle portion out from the inside of one hook to the inside of the other hook is 12". The minimum length between the hooks when they are all the way in is 7-5/8". I have a diagram below that shows the measurements for you.
view full answer...
- What is the Maximum and Minimum Length of Camper Tie Down hardware Package # TDHPI went out to the warehouse and pulled a tie down hardware package, # TDHP, to take some measurements. With the hooks on the turnbuckle portion out from the inside of 1 hook to the inside of the other hook is 12 inches. When you attach a chain and an S hook, from the inside of a hook to the inside of the S hook measures 19-3/4 inches. The minimum length between the hooks when they are all the way in is 7-5/8 inches. I have included a picture that shows the measurements for you. The hardware...
view full answer... - Hardware Included With The Brophy Stake Pocket Mounted Camper Tie Downs # TDSFThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF includes the following hardware: 8- 5/16 x 1 1/4 sheet metal screw 4- 5/16 flat washer 4- 5/16 hex nut 4- 5/16 x 1 hex head bolt To complete your setup you'll also need some turnbuckles, like the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP.
view full answer... - Will Brophy Camper Tie Downs Fit a 2007 Dodge Ram 1500 with Spray-In BedlinerIf you do have 2 inches underneath the bed rail then you can use the Brophy camper tie downs # HSSF on your 2007 Dodge Ram 1500. I also recommend hardware package # TDHP. If you do not have the necessary clearance then the best option is going to be custom tie downs that attach to the frame. I have included a link to the custom tie downs for your truck. Use the drop down menu to select the version that describes your truck to see the options that fit.
view full answer... - Will Brophy Tie Downs HSSF Fit a 2008 GMC Sierra 3500The # HSSF tie downs work great in your generation of GMC Sierra so they would work well in your 2008 GMC 3500 Sierra. As long as the camper is designed to fit your truck bed length these are going to work great as they don't have a weight limit. For hardware you will want the part # TDHP as well.
view full answer... - Will Brophy Camper Tie Downs # TDSF Fit a 2009 Ford F-150 Super Cab Short BedThe Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a 2009 Ford F-150 Super Cab short bed . The hardware to mount the tie downs to the vehicle is included. These tie downs can be used on campers that have a total length of up to 8 feet. I am including a link to the installation instructions. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your vehicle. The...
view full answer... - Do Brophy Camper Tie Downs have a Weight Capacity RatingThere is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part # TDHP that is used to attach the camper to the tie downs. The hardware package has a weight capacity of 3,000 lbs.
view full answer... - Will Brophy Camper Tie Downs Fit 2004 Ram 2500There are some exclusions for the Brophy camper tie downs # HSAB: Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton 1500 extra cab 4-door 2WD short box 2002 Dodge 1500 4-door short box 2002 Dodge 1500 quad cab 2004-2008 Ford F-150 But the list does not exclude your 2004 Dodge Ram 2500. If the dually bed is not completely metal or if the walls are double-walled...
view full answer... - Will the Camper Hold Downs, # HSSF Fit a 1975 Rancho El Rae and Ford F-250The Camper Hold Downs, # HSSF, will work with any camper that is a fit for your truck. These hold downs do have some limitations as to what trucks they will fit. If your truck bed is a step side or has a double wall, they will not fit. However it is likely that it will work for you. Take a look at the installation pictures I have included for you. I also recommend using the camper tie down hardware package, # TDHP.
view full answer...
- Will the Brophy Camper Hold Downs Fit a 2012 Chevy Silverado 1500 with 6-1/2 Foot BedIf it is not a dually and does not have a step side or double wall bed, then the Camper Hold Downs, # HSSF, will fit your 2012 Chevy Silverado. These hold downs wrap around the bed rather than fit inside the stake pockets and will work for any camper that is a correct fit for your vehicle. You can also use camper tie down hardware kit, # TDHP, with the hold downs. To install, first place the protective tape under the rest plates and on the T-Bars. Next, thread the T-Bar into the nut at...
view full answer... - Recommended Camper Tie Downs for a 2008 Chevrolet SilveradoThe Brophy Stake Pocket Mounted Camper Tie Downs part # TDSF that you referenced are a great option for your 2008 Chevrolet Silverado so long as it is not a dually. These tie downs install in the stake pocket openings and are made in the U.S.A. They also come with a one year warranty. The reason I like these tie downs is because they are super easy to install. There is no drilling required and they come with a black powder coated finish so you know they will withstand rust. In order to...
view full answer... - Camper Hold Downs for 2001 Dodge Ram 2500The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, including your 2001 Ram 2500. Some Dual rear wheel truck beds may interfere with the installation of the hold downs. The brackets wrap around the bed rail, instead of using the stake pockets. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, the kit is part # TDHP. The kit includes...
view full answer... - Camper Tie Downs For a 2021 Ford F-350The Brophy Clamp On Camper Tie-Downs # HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle the actual camper load with the tie downs there to secure the camper in your truck bed. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to secure the camper to the tie downs, the # TDHP do have a 3,000 lb. capacity. To answer your second question, yes the tie downs are specific to your truck. The Brophy...
view full answer... - Camper Tie-Down Recommendation for a 2009 Ford F-150There's no reason the Brophy Camper Tie Downs part # TDSF wouldn't work on your 2009 Ford F-150. As long as your camper is less than 8 feet long this kit would work well for you. The recommended hardware kit to install either tie down kit is Camper Tie Down Hardware Package, # TDHP.
view full answer... - Brophy Camper Tie Downs that Fit 2017 Chevy Silverado 1500For your 2017 Chevy Silverado 1500 the part # HSSF would be the correct camper tie downs. We have confirmed with Brophy that these work on the newer Silverados. For a hardware kit you'd then need the part # TDHP.
view full answer... - Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsTorklift does not have a custom fit tie down for the front of your vehicle because of the running boards. Tie downs # HSSF are an option. I have included a link to the installation instructions plus a review video so you can determine if they would be compatible with your truck since there is no fit guide for these tie downs. You will also need the # TDHP.
view full answer... - Will Brophy Camper Tie Downs HSSF Fit 2001 Chevy SilveradoYes the Brophy camper tie downs part # HSSF that you referenced do fit your 2001 Chevy Silverado. We had the chance to install these on a similar Chevy truck and they fit well. Check out the review video and install pictures I attached as well. You'll need the hardware kit # TDHP as well to attach them to your camper.
view full answer...
- Camper Tie Down Recommendation for a 2015 Ford F-150The Camper Tie Downs part # TDSF that you referenced are a universal install tie-down system that would work well on your 2015 Ford F-150. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. For a hardware kit you would need the # TDHP.
view full answer... - Will Camper Hold Downs, # HSSF, Fit a 2007 Chevy Silverado 2500 Duramax Long Wheel Base Crew CabAs long as your 2007 Chevy Silverado is not a step side, does not have a double wall bed, and is not a dually, then you can use the Camper Hold Downs, # HSSF. I have included a link to the installation instructions for you to view. We also recommend using the Camper Tie Down hardware package, # TDHP, to secure the camper to the tie downs.
view full answer... - Will Brophy Camper Tie Downs # HSSF Work With 2009 Dodge Ram 1500 Quad Cab 2WD TruckThe Brophy Camper Tie Down, part # HSSF is a universal fit item and will work on your 2009 Dodge Ram 1500 2WD Quad Cab. There is not a weight capacity for the hold downs, and will work with any camper that fits your truck. Part # HSSF works with trucks that have spray-in bedliners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. The Brophy Tie Down mounts over the sidewall of the truck bed. The recommended hardware kit to install part #...
view full answer... - Will the Brophy Clamp On Camper Tie Downs Be Used on a 2018 Ram 2500 W/ A Velcro Tonneau Cover? As long as your 2018 Ram 2500 has access to the underside of the bed rails and a minimum of 2" between the lip of the bed rail and side wall the Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB will fit. You're also going to need a set of turnbuckles # TDHP to secure your camper to the tie-downs.
view full answer...
- Can Brophy Camper Tie Downs Be Used on Ford F-350 with Aluminum BedWe have spoken with Brophy in the past about the Ford F-350 with aluminum bed such as your 2018 model and they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP and you'd be set.
view full answer...
Do you have a question about this Accessories and Part?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Video Edited:
Zack K
Video Edited:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mario
2/17/2023
Havent used the tie downs in a year. Hoping to use them again for a camping trip in March. Great product.