To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper where the D-rings are attached.
Features:
Specs:
Tow your off-road vehicle with your Roadmaster motor-home-mounted tow bar using these adapters. Simply attach the adapters to your tow bar's arms in place of the quick-disconnects. Then remove the D-rings from your Jeep's bumper and hook the tow bar up to the shackle mounts. These adapters fit shackle mounts that are 1" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Average Customer Rating: 4.8 out of 5 stars (236 Customer Reviews)
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper where the D-rings are attached.I was looking for something to join two specific products- 2021 Full size Bronco and the Falcon All Terrain Tow bar I acquired from a friend. So I went on etrailers website and sought that out. After finding something I thought was right, I wanted to be sure by asking their amazing customer service. I got a reply very quickly that the product I was looking at would not work. Kevin, the customer rep, found what I needed(which was actually for a jeep) but fit my application. It was cheaper and easier that what I had picked out too! I received it about a week later and it fits perfectly. I need to wire the Bronco now for lights but I am very excited to take her for a spin. This is not the first nor the last product I will buy from etrailers and I will never hesitate to ask their wonderful customer service! Keep up the great work guys!!
Using these I was able to mount the tow bar to some generic recovery points to tow my FJC.
The adapters seem to have some slop, contacted Etrailer and was told to contact Roadmaster. I have almost 1/4 inch slop, Roadmaster says the gap is not uncommon and to add washers to take up slop. We will see how it works out.
They work great. I would highly recomend getting the padlocks to secure because I have had the hitch pins work loose and almost come out.
Great product I bought it for a Excalibur ll towbar hook up.
They do fit the bar but you will need to use spacers if you remove the bar end pieces. However being a machinist I elected to bore .015-.020 from bar end ID which I felt was best. Pic before adding the bored ends.
Dewayne
12/20/2023
After using this for a year, Im very pleased with the results. No issues at all
The adapters are perfect.
My customer loves it. It made it possible for him to take his jeep or his car when he’s out camping.
The USPS said it put the package in a locker. We have no lockers in my neighborhood, only mail boxes. I have complained to the USPS. On the day they said they delivered it, no one on my street received any mail. As far as I am concerned, if you are going to use the USPS for delivery, I cannot do business with you. The USPS is a poorly run operation and the victims have no recourse.
Katrina D.
8/8/2023
I am sorry to hear that you had such a bad experience with the shipping. We do use other sources for shipping outside of USPS. I am sending your information over to our customer service department for them to get this corrected for you.
O.K. I'll play... Fantastic fit for a casting. I wasn't expecting this to work well, given that I couldn't find one single online explanation nor video of "towing a jeep from bumper eyelets". The weight savings of using the aftermarket bumper D-rings vs. the tow adaptor plate, common with many T.O.A.D. towbar manufacturers is huge. These make the transition to towing the jeep much easier. A perfect retrofit for the arm ends of a Sterling towbar... product from Roadmaster
Works as advertised. Jeep is lifted with 35 inch tires so had to purchase another adapter to level tow bar. Using these on D-ring tabs on Poison Spyder winch bumper. Easy to install and use.
Needed adapters to go from my RoadMaster tow bar to the new D ring mounts I had put on the Jeep. The new ones fit right on and also look good, along with very beefy.
don't think they are legal but they work great...
Great fit, very please with quailty and used on a Roadmaster Sterling All Terain Tow bar, pulling a 2018 Jeep JKU with a Smittybulit Gen 2 XRC Bumper.
Worked perfectly for my 2023 Bronco!
Excelent conversion to mount directly to jeep bumper.
Worked great!!
Everything worked I did have to use the adapters that was already on the shaft which was not a problem
Product arrived earlier then estimate. The brackets look heavy duty.Very happy so far
Excellent products and service
Bill
10/25/2023
It’s working great, thanks for your help!
Mike L.
11/11/2023
Great product easy to install etrailer is my go to store and fast shipping
Great quality product. Very well machined and polished. Easy on and easy off. Perfect fit for my Ford Bronco Raptor and motorhome.
Ideal product! Perfect fit for setting up my Jeep Wrangler toad. Easy install and fast to connect/disconnect. Minimal slop, just right to be able to align pins.
Fast shipping great tracking. The product is well made looks really durable.
Robert was a pleasure to deal with.
These adapters are a great alternative to buying and installing base plates to flat tow using a winch bumper and existing tow bar. They fit perfectly on my Demco Aluminator and Excali-bar tow bars even though the mfrs told me they won't fit. Thanks etrailer.com, I saved a ton o'cash!
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
1/20/2023
The product still works like it did a year ago. I now have the Bronco wired and the cords dont bind or get in the way at all. The ease of the hook up and disconnect is so convenient that it almost feels like cheating. Great Customer Service and recommendations from this company!!