Service Parts for Older Roadmaster Sterline Tow Bar to Attach to Jeep D-Ring Mounts

Question

Question:

Hi, I would like to service my roadmaster sterling tow bar and want to make sure I order the correct kits. I would also like to change the inner nylon washers...can you varify and provide what I need for both arms. I also would like to convert the ends to accept the drings mounts on my jeep bumper and need the correct part number Thank you. My roadmaster sterling tow bar manf. # is 010105.

asked by: Michael M

0

Expert Reply:

I reached out to my contact at Roadmaster regarding your older Sterling Tow Bar and he said for the complete repair kit you will need part # RM-910003-30.

For the inner arm bushing kit, which includes the needed washers, you will need part # RM-910003-40. There is no longer a kit available for the outer arm but we do have the Split Nylatron Bushing # RM-200029-00 that installs inside the larger outer arm assembly.

To attach to the D-Ring mounts on your Jeep either the # RM-035-1 for 1" thick shackle mounts or # RM-035 for 3/4" thick shackle mounts will work well.

expert reply by: Chris R

0

Answer 1

Thank you for all of that info! I reached out to my contact at Roadmaster who looked at your serial number and said your tow bar is old enough that if something needs to be replaced then the entire tow bar will need to be replaced. To replace the…

view full answer...

Answer 2

If the serial number on your Sterling tow bar is 2433 then replacement arm #RM910660 will not work because it is designed for models with serial numbers between 11841 and 27824. But if the number you have given is missing a digit then the arm will…

view full answer...

Answer 3

Yes you can replace one of the arms of your Roadmaster Sterling Tow Bar part #RM-576. To pick out the correct inner arm you will first need to check the serial number on the tow bar. If the number is lower than 27824 then you have the older style…

view full answer...

Answer 4

It sounds like your Roadmaster Sterling Tow Bar part #RM-576 needs to be taken apart and cleaned thoroughly. I spoke to my contact at Roadmaster and he said that most likely there is a pretty large accumulation of carbon, dirt and other road grime…

view full answer...

Answer 5

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these…

view full answer...

Answer 6

If all you need is the bushing kit for your Sterling tow bar then part #RM-910003-40 is the kit you need. We also offer a Complete Repair Kit for Roadmaster Sterling Tow Bar, part #RM-910003-30. This kit comes with rubber caps, locking springs,…

view full answer...

Answer 7

Looks like you have a round 4-way connector in the picture you submitted. The colors you mentioned aren't totally a match for standard colors but they are close. Normally the colors are: White - Ground Return Green - Right Turn and Brake…

view full answer...