bing tracking image
Q & A Icon

Parts Needed to Flat Tow a 2018 Jeep Wrangler JL  

Question:

Please provide me with a tow and brake package recommendation for the following setup: Tow: Class A RV with air brakes Towed: 2018 Jeep Wrangler JL Sport with aftermarket D-ring front bumper.

1

Helpful Expert Reply:

To flat tow your 2018 Jeep Wrangler JL behind your Class A motorhome with air brakes you will need the following parts:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Adapter for Jeep D-Ring Bumper Mounts 1" Thick item # RM-035-1 or for 3/4" Thick D-Rings item # RM-035

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes item # SM99243

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

I have linked several installation videos below that I recommend taking a look at so you can see this parts being set up and used.

expert reply by:
1
Jerred H

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>