7" x 1-1/4" Electric Brake Shoe/Lining (One Wheel)

Video Transcript for Dexter Axle Trailer Brakes BP04-040 Review

Speaker 1: Today we're going to take a look at the Dexter 7 inch by 1 and 1/4 inch electric brake shoes for the single 2000 pound brake assemblies. Now these replacement brake shoes are for the Dexter 7 inch by 1 and 1/4 inch 2000 brake assemblies. These will work on both the right hand and the left hand side assemblies, and they are designed to work with the Dexter brake assemblies part number 23-47 and 23-48. Both of those we do sell separate on our website. Now the mounting hardware is not included with this.Just to give you an idea of where the measurements when they say 7 inch by 1 and 1/4 inch, the 1 and 1/4 inch of course is the width of the lining on the shoe. Then the 7 inch is when these are installed onto the brake assembly the diameter from the edge of one shoe to the edge of the other would be right at seven inches.

That's why they're called a 7 inch by 1 and 1/4 inch brake shoes. But that should do it for the review on the Dexter 7 inch by 1 and 1/4 inch electric brake shoes for a single 2000 pound brake assembly.