Replacement Plastic Knob For Ventline Ventadome V2119

Question

Question:

Hello Is there a screw that holds the plastic gear on? I bought an rv used and the plastic gear is missing that opens and closes the vent cover.

asked by: Richard D

0

Expert Reply:

Yes, there is a screw that holds the plastic knob on that looks like a gear on the Ventline Ventadome Model V2119. The knob and screw can be replaced with part # BVD0462-00 which is also comes with the operating mechanism but the two parts you need are not sold individually.

expert reply by: Heather A

0

Answer 1

Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item #15123 and the 031-030-02 bearing is item #25580. For a bearing kit you can use part #BK3-110…

view full answer...

Answer 2

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

view full answer...

Answer 3

Yes, the Replacement Cover #PE48UV will indeed fit the 2018 Ford F-150 extended cab with the 67" bed. This is made to be a replacement cover for the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRFA05A28 which is specifically for…

view full answer...

Answer 4

Hello Rosemary. For a replacement shroud for your Coleman TSR 7300 Series rooftop AC you can use the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover #MA00-325001. The TSR 7300 series is also known as the Mach 3 which does fall under the fit for…

view full answer...

Answer 5

To replace the controller for the Replacement Vacuum Generator for Dometic VacuFlush RV Toilet #DOM46FR you need the Replacement Touchpad for Dometic VacuFlush and MasterFlush RV Toilets #DOM36FR.

view full answer...

Answer 6

The bumper part #D3-96 that you referenced is our best option and could work for you but you will need to make some modifications. You would need to cut it down to the 84 inch length you need and would also need to drill new holes in it that line up…

view full answer...

Answer 7

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Replacement Plastic Knob For Ventline Ventadome V2119

Product Page this Question was Asked From

Continue Researching