Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Monitor and control your Inteli-Power PD9200 and PD9300 series converter with this status remote pendant. Manual switch lets you select the charging mode of the built-in Charge Wizard. Indicator light displays the current operating mode.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a quick look at this converter status remote pendant for your Progressive Dynamics Inteli-Power Converters. This status remote pendant is going to let you monitor and control your Inteli-Power PD9200 series converter. And this manual switch here is going to let you select the charging mode of the built-in charge wizard. And this indicator light that kinda resembles that wizard's crystal ball or orb, that light is going to display the current operating mode.
So as you might be able to see here on this label, the boost mode is indicated by a full on light and then the normal mode is indicated by a blinking light. And then the storage mode is indicated by a short flashing light. You're just going to simply press the button and hold to cycle through the modes. It will return to automatic mode when needed to prevent battery damage. So this is going to be a simple installation.
You're just going to connect this to your converter's accessory port via this three inch long cable. And then you're gonna be able to easily secure this with the peel and stick adhesive that's already applied here on the back of this unit. And just to give you some overall measurements to kinda give you an idea of the size, looking at the overall height, bring that into frame there for you, we're sitting about two inches tall. The overall width, we're sitting right about 1-1/4 inches wide. And then the overall depth, we're sitting right at about half an inch deep.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (103 Customer Reviews)
Monitor and control your Inteli-Power PD9200 and PD9300 series converter with this status remote pendant. Manual switch lets you select the charging mode of the built-in Charge Wizard. Indicator light displays the current operating mode.This little device saved me 300$ when I switched from lead acid to lithium batteries. Simple 1 minute installation and test. Great communication between both parties shipping, and follow up after delivery.
Anytime i order from eteailer i know my order will be processed in a timely manner. When competing with the Amazon monster and two day shipping I appreciate the effort on etrailers behalf...
My microwave shorted out my last converter so I had to replace it. Actually I purchased the microwave from e-trailer before and had it in storage brand new. I installed it and the PD4655V converter. I haven't switched out the new DC board yet, since the old one still works well. I'm back in business again!
It is nice to see the status of the battery maintenance level at a glance. It has been a year and works great.
The pendent (remote reader) works great to let you know the status of your converter. My coverter has a charge wizard built into it. This makes it a smart, automatic charger. However, to know exactly what mode the charger is in, one must have this pendent. It's easy to install. Just find the connection on the converter. My converter was difficult to find because of the way the converter is installed. You can use your phone camera on selfie mode and photograph it. It attaches just like a telephone jack. I have attached photos of the connection point and the mounted pendant. It works great.
Itis great to know what the charge mode is on the batteries. After loosing 6 batteries from being over charged by a "brand X" converter I feel comfortable watching the wizard do its little blinking thing. I will have to wait a while before I can say positivly that my batteries like the new converter but I do have high hopes. The better quality of the PD converter is obvious as the old one was very poorly made standard Keystone junk that came with the trailer.
Used this to replace a Todd Power Source in my camper. The installation was straight forward and the Progressive Dynamics is keeping the batteries from dying, which was occurring with the old converter. Overall, I am happy with this purchase.
I was able to get converter to top off lithium batteries. Before, it never went past 70% charged.
Using this to power a DC motor and it works fine.
Took 9 days in shipping, but that was on the USPS not etrailer ! Product is working fine!
Couldn't be happier with this new remote monitor, but also with the Converter / Charger I recently purchased that it monitors! Great Customer Service, great products at a great price... what else could you ask for?!?!?
The first shipment was damaged by the carrier. Snapped a couple photos of the damage, sent to Josh K from etrailer and he immediately took action and got a new one expedited and it was at my doorstep a day later. I will order other item’s from etrailer because their service is top notch!!
I replaced my lead acid trailer battery with a LiFePO4 battery. The remote pendant allows me to fully charge the new battery by supplying 4 hours of 14.4 V when a recharge is needed. It worked whether we were on shore power or generator and me all our needs.
Install was easy. The remote wired pendant is very handy
Not a lot to say about his unit. It simply does what I claims, nothing more. On the PD960ALV converter I use with the pendant, the charge wizard circuitry is actually build into the converter so the pendant functions purely as a way to force the converter into either of its two states as well as provide a visual feedback as to which state is currently operating.
This is a great add on to the Progressive Dynamics converter to monitor its status.
Works perfect
It works like a champ! I had retired from the military and am living the full time RV life. My only regret was that it's a converter and not an inverter.
One day I'll make the jump to lithium.
We have only one regret... we neglected to purchase a Valtera electric waste valve through [online store] vs etrailer. We learned a big lesson! The valve was junk and we'll purchase from you, once savings accumulates.
Great service. Ordered a new converter for the coach and it arrived early. Installed it and were back up and running ready for the next trip.
Thanks guys
Stay healthy.
Steven
8/1/2021
Made several trips since installing the new converter and still working like a champ. Very satisfied. Thanks guys.
Quite happy with this product. Easy to install and is clearly superior to the one it replaced.
i bought this to trigger the progressive dynamics 9200 into 14.4v mode to charge a lifepo3 battery. well it works. it stays in 14.4 volt mode then the wizard takes over.
no problems with etrailer. i have bought from them before and will again.
post office is having problems with package routing in our area.
Nice to have with the main unit
Works as expected. It was a replacement of a smaller converter.
It's a small push button plug in controller.. not very exciting, yet it's nice to know I don't have to spend hundreds to change my converter because i switched to lithium batteries. Intel-peak 9200
Easy install on top of the fast shippin g.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Donald
12/11/2023
This little device saved me hundreds of dollars and works great. If your older RV has a Progressive Dynamics power supply for lead acid batteries this device will charge LIFEPO4 batteries reliably. It just plugs into the existing power supply in seconds.