Should The Charge Wizard Be Removed When Switching Progressive Dynamics AC/DC Panels To Lithium Mode

Question

Question:

When switching over to lithium battery mode do you need to remove the four wire harness that connects the wizard on the circuit board?

asked by: Richard G

0

Expert Reply:

Once you flip the switch to lithium on your Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp # PD4135K it basically bypasses the Charge Wizard # PD92201 so you can remove it or leave it connected.

expert reply by: Kevin C

0

Answer 1

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to…

view full answer...

Answer 2

The Progressive Dynamics 9300 Series Battery Converter Charger #PD89RR has the different plug as it requires plugging into a 20 amp circuit. This is due to having the higher output which requires additional power into the unit. Since you currently…

view full answer...

Answer 3

Since the Progressive Dynamics 9300 Series RV Converter Charger #PD49RR can work with both lead acid and lithium batteries it's going to be the better option over the Progressive Dynamics 9100 Inteli-Power Lithium Converter #PD9130LV, which…

view full answer...

Answer 4

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 5

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

view full answer...

Answer 6

Hey Phil, the correct 60 amp converter replacement that is Lithium compatible is the Progressive Dynamics part #PD79RR. This charges at the higher voltage required by lithium batteries.

view full answer...

Answer 7

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries.

view full answer...

Should The Charge Wizard Be Removed When Switching Progressive Dynamics AC/DC Panels To Lithium Mode

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching