Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1,000-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers.
Features:
Specs:
This 12V inverter, with built-in transfer switch, changes DC output from your RV batteries into AC power and sends it to the electrical system. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. The inverter can generate 2,000 starting watts and 1,000 running watts which is a great fit for appliances and electronics. Additionally, with the integrated transfer switch, it will automatically change from inverter to shore power when available.
To connect your AC loads, the inverter includes hardwired 15-amp input cord and an output terminal. It also has positive and negative DC terminals that connect to your batteries. Lastly, there is a port for the included fixed-mount remote. The system includes a number of safety features. It has a reverse polarity protection that will protect the converter if the battery is hooked up incorrectly. Additionally, the unit includes protection for overvoltage, undervoltage, and overloading which can damage your equipment, as well as the converter. The built-in cooling fan also removes excess heat from the unit. The fan speed is proportional to the internal temperature on the converter, so when the power demand is low, the fan will operate quietly. For additional safety, installing a 200-amp fuse (sold separately) between the battery bank and the inverter will protect your equipment from power surges.
The integrated transfer switch selects the primary source of 120V AC current. This switch has been pre-wired to automatically change from inverter to shore power to conserve battery life. It includes a 20-amp leg rated at 135V. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.
The fixed-mount remote lets you monitor and control the inverter from inside your RV. It includes a digital display that shows voltage, output power, error codes, and a low battery indicator. It also has a power button to turn the inverter on and off.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed close to the battery bank, but not in the same compartment.
The DC terminals are wired to the battery bank.
There are several ways to connect the inverter to your RV's electrical system, but this will depend on your rig and how you want to use your inverter. If your RV's distribution panel only has one leg, a subpanel will be needed for installation. You will also need a 100-amp circuit breaker between the inverter and battery positive post. Two 20-amp circuit breakers will be needed to channel AC power from the main panel into the inverter and then out into the subpanel.
Average Customer Rating: 4.8 out of 5 stars (1296 Customer Reviews)
1,000-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers.Nice, compact unit. Replace a WFCO inverter that came with our RV. Had replaced the WFCO 2 times plus returned one dead out of the box.
The Progressive Dynamics is a smaller footprint. The AC and DC wiring was easy and straightforward. No wire nuts (ugh) needed or did I need to stuff wires and wire nuts into a small space.
Nice operational display. I did not run the remote display/control into the RV but mounted it above the PD for easy use.
It’s working so well we don’t even think about it.
Outstanding, made in USA, seemless switches from shore to vehicle smoothly.
Remote disply is very handy for load monitoring.
Works like a champ and easy install.
Quiet and easy to see
unit works well and service was exellant associate well informed
very nice unit , no problems
etrailer should take some lessons from Amazon. When multiple products are sent to a distributor in a large box or pallet, the individual items should then be shipped for an order in a secure package. etrailer simply slapped a label on the manufacturer’s flimsy carton and tossed it to USPS who succeeded it breaking the single stran of tape around the box. When I received the package, the box was totally opened on one end and the inverter mounting tab was bent. Not the delivery I would expect for a $600+ item.
We utilized the Progressive Dynamics Inteli-Power RV Converter and lithium Battery Charger as part of our lead acid to Lithium upgrade for our Aliner RV. We had several manufacturers to choose from but are very pleased with our decision to go with this product. It’s performance remains steadfast after the first year in service, its quiet, efficient, reliable and perhaps best of all MADE IN AMERICA! The multi stage smart charging g work flawlessly with our Lithium battery system. 100% recommendations from this satisfied us timer!
Installation of PD9260C into Parallax 7300 power distribution panel
I purchased the Progressive Dynamics PD9260 to replace the power converter in my 2007 Airstream. My trailer had a Parallax7300 power distribution and power converter (AC to DC) installed from Airstream. I decided to replace just the power converter after it had failed. The PD9260C fit perfectly where the previous converter was installed with very little modification or effort.
I simply removed the older converter, removed some standoffs where the previous converters circuit board was mounted along with the old fan, and then drilled some holes to mount the PD9260 in the mounting tray of the old unit. I wired the new converter to the existing connections and tried it out. Everything worked as expected.
I installed this in my camp with 400 watts of solar an a LFP04 battery with a generator hookup. I use the lithium charge profile and it works great. It runs my 12v rv refrigerator with no issue.
Very concerned about this. Unit arrived via USPS in an unmarked cardboard box with zero packing. There was at least of clearance on sides which means it was banging around in the box the whole trip. Looks like a return. No hardware, or screws included. It wasn't even in a bag and "manual" is a corner-stapled 8.5x11 photocopy.
I wasn't planning on installing this right away, and now I'm thinking about returning because I don't want to have problems down the line due to unseen damage or broken solder joints. Very sketchy.
A little bit confusing when speaking with sale team, received conflicting information regarding converters application. Shipping was fast but converter container was damaged and poorly packed for sensitive electronics. Previous business with etrailer has been stellar. May be awhile before I can hookup converter, so hopeful nothing was damaged!
I purchased the Progressive Dynamics PD9200 to replace a failing OEM converter. The unit is wider than the original but with some minor wood work I was able to install it in the original location. As soon as I powered it up all of our problems in the 2018 Forest River 5th wheel vanished. Our main issue was flickering LEDs which drove us crazy. Time will tell if this is a quality product. etrailer is amazing to work with. The item arrived ahead of the estimated delivery date. It was packaged in the original box so the serial number on the unit matched the number on the box. No fear of counterfeit items from these folks.
Nice unit, I wish the exterior would be something other than plastic and the install directions were more precise. The PD045 sits close to the floor and a case of something other than plastic would be more durable. Perhaps an aluminum cover would help. The new unit replaced a 25yo and my Leisure Travel RV. The new 4045 works well. It took a year to installs as I could not find a local RV place that would work on the replacement. Decided to educate myself and installed the unit this spring ( I bought the 4045 model last summer). The etrailer install videos were useful as well as numerous YouTube guides. However, much better manufacturer instructions would have saved a lot of time.
Works great and is lithium capable . Far better charging of my house batteries than the wfco that came with my trailer
Bought this distribution panel for an enclosed trailer build and it has been perfect! I coupled this with a 100aH lithium battery and Renogy lithium battery monitor; the built in lithium charging support has been a great option. After figuring out all of my wiring it was a very simple install and the blown fuse indicators are great for quick trouble shooting.
So far converter has been reliable with no issues. Purchased originally after converting to lithium batteries in which the old converter didn't support. Took me three hours to remove the old and install the new. I'm happy with my purchase.
Game-changer for our lifepo4 batteries! I swapped out the PD 4135K for the WFCO 8735P that came standard in our trailer. Installation was fairly easy, just had to glue and screw a 1/2" square dowel in one side of the cutout to make the opening smaller. Wiring was simple. We only charge throu the converter when we don't have enough solar, and it's nice to know we're maximizing the charging from our generator. The lithium switch is really small and a little hard to access, but I shouldn't need to get to it again unless we switch back to AGM, which isn't going to happen. Happy we made the change!
This is working well for us in our diy camper! We had to use [online] to figure out how to hook it up.
Do you have a question about this RV Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Noaa L.
2/17/2023
fantastic! very nice product, remote display is very useful for diagnostics.