Which Progressive Dynamics Inteli-Power RV Converter Has Multi-Stage Charging?

Question

Question:

Does the PD914024ALV have a 2 stage charging system like the 12 Volt models ?

asked by: Ralph

0

Expert Reply:

The Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 24V - 40 Amps # PD914024ALV will fully charge your battery bank but it doesn't have different stages of charging. Unfortunately there aren't any other options that work with a 24V lithium battery bank so this is the only option we have for you.

This will work with the Converter Status Remote Pendant # PD92201 so you can physically see where the charge level is.

expert reply by: Jon G

0

Answer 1

Since two 12 volt batteries wired in series has an output voltage of 24 volts the part #PD912524LV would work great as it was designed for 24 volt battery systems.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

Hey Don, the MOLLE Panel for Yakima OverHaul Truck Bed Racks #Y48DJ includes just one panel.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Dave, for a 60 amp charger the 6-gauge wire that you have currently is not going to cut it. You will want to use 4-gauge copper wire for your 15' run when using the Progressive Dynamics PD9200 Series Battery Converter Charger #PD9260C. For a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Albert, the correct replacement lithium compatible converter for the part #PD9245C is the part #PD69RR which has same amperage output of 45 amps at the correct voltage for lithium batteries.

view full answer...

Answer 11

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 12

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Which Progressive Dynamics Inteli-Power RV Converter Has Multi-Stage Charging?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching