Stainless Steel Trim Ring for Optronics Trailer Tail Lights - 6" Oval

Video Transcript for Review of Optronics Trailer Lights - OPT82ER

Hey, everybody. Welcome to etrailer.com I'm Bobby. And today we're taking a look at the stainless steel trim ring for Optronics trailer tail lights, which about six inches on there, of course. So the trim ring allows us to add a nice finished look to our Optronics six-inch flange-mounted trailer lights. The stainless steel construction is gonna be very durable and very resistant, to any kind of erosion that might be thrown its way. Which is gonna be great 'cause this is gonna be in the back of our trailer a lot, right.

Out in the weather a lot of the times. So we definitely want it to be looking good for the years to come, which is the reason we're getting it. So, we know with that stainless steel construction, it is gonna be giving us that nice quality for itself. Gonna go ahead and give you guys just a closer look here at it. So it is gonna fit a variety of different Optronics lights, as long as they stay within our measurements, of course.

And the one thing, it doesn't come with any screws. So, a lot of times you probably already have screws for your light, but if you don't you will need to purchase those separately. Definitely not gonna be too hard to do. Just little mounting screws. That kind of thing.

You don't need anything too serious for that hardware. I have gone ahead and just grabbed ourselves one of our Optronics lights here today. 'Cause that's gonna allow us to go ahead and see how this is actually in place here. So all we have to do is simply take this guy. We have it mounted, we walked it right up.

There we go. Gives ourselves a nice little finished look. So definitely looks a little bit better as you guys can see there. That stainless steel going all the was around. Now, the black's not terrible, of course, but it's definitely do has that plastic look. This is gonna go ahead and give yourself that nice industrial stainless steel design. It makes it look really good on the back of those trailers, right, which is gonna be great. So let's go ahead and take a look at our inner dimensions here, though, for ourselves guys. So, going straight across here from our max width, or yeah, max width here. I guess, length, depending on which way you're looking at it, right That's gonna be putting you right about six and a half inches for ourselves there, guys. So that's gonna be perfect. As you guys saw allowing your Optronics lights to sit right inside there. And for our max height here on our inside to inside dimension is gonna be putting you right about two and one quarter inches there. Really just a little bit below it though. So not too much room. But again guys, this is gonna be designed to fit those Optronics lights. So you're gonna have no trouble. If you guys do look closer at the page on the bottom there, it's gonna go ahead and tell you all the lights that it does fit. So make sure that yours is well within the requirements. Gonna give you some more detailed dimensions if you guys are needed on that. But yeah, I think that about does it for our look at the stainless steel trim ring for Optronics trailer tail lights here at etrailer.com. I'm Bobby. Thank you for watching..