Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
6-1/2" Oval. Waterproof trailer light serves 2 functions: tail light and certified backup light - when used in a pair. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 3-wire pigtail.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This Light Guide light has a standard 3-prong plug as pictured above. A 3-prong pigtail (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer. You will also need a rubber grommet (A70GB - sold separately) to install your tail light. An optional mounting bracket is also available (BK70BB - sold separately) to make it easier to mount the light on your trailer.
Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics Light Guide LED Truck and Trailer Backup Light. This oval backup light is perfect for trailers and utility trucks. It is certified for the backup light function in a two lamp system when a pair of lights are installed. Second light is sold separately.The light guide series features a smooth X shape across the face of the light, and it is sonically sealed so it features a waterproof housing and lens unit that is submersible. The unit features durable surface mount technology when it comes to the construction of the LED circuit board. That's designed to better withstand shock and vibration and it allows for improved heat distribution.This is a full LED system.
LED's make great replacements for incandescent lights. They last longer, they burn brighter and they're much more efficient. You don't have to worry about replacing bulbs and you don't have to worry about viral filaments with LED systems.It features the polycarbonate lens and housing. It's very strong and durable. It is a recessed mount installation with a mounting grommet.
Mounting grommet is sold separately and available at etrailer.com.Here on the backside, it will accept a three wire pigtail, so something like this right here would plug right into the back here and it will provide you with a white wire which would be your ground. Black which would be for supplemental tail light. Red would be for the backup light.This is Department of Transportation compliant. It meets FMVSS-108 requirements in any 360 degree position.Taking a look at the dimensions real quick, they we'll hook it up to power. Edge to edge measures about six and a half inches.
Top to bottom is about two and three eighths and the overall depth from the very front to the back of the plug is about one and three quarter inches deep. This portion here measures about one inch deep.We're going to go ahead and hook it up to power that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead light so you can see it in a lower light setting. So here you can see that taillight function and then when we apply the reverse button, you can see there that it shows what it would look like when your truck or trailer's in reverse. Really nice bright design.
Multiple LED's so the multi-dial design really helps optimize the overall light output. The power draw at 12.8 volts is 0.381 amps and Optronics puts a lifetime limited warranty on the LED's.That's going to do it for today's look at the Optronics Light Guide LED Truck and Trailer Backup Light.
Average Customer Rating: 4.8 out of 5 stars (14 Customer Reviews)
6-1/2" Oval. Waterproof trailer light serves 2 functions: tail light and certified backup light - when used in a pair. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 3-wire pigtail.
The light is used on a boat trailer, and it is not completely sealed. It got water in it, and now it doesn't work any more.
Look good installed. I had a large dent that I needed to deal with, so I cut it out. Wish the backup light was a little brighter, but they do what I wanted them to do. The red X are turn signals / brake lights.
I really like these.
The backup light puts out a LOT of light, which I am very greatful for. The tail light functions look pretty badass, and do a sufficient job of alerting people to stops and turns. I used them as a supplemental tail light (long skinny bar light mounted above to provide the main tail light functions) and wanted them primarily for backup. They are doing exactly what I wanted them to.
They look nice
Awesome lights! I've had a lot of good compliments on them and have others get me to order them some. I really like the backup light features.
Awesome light at a great price! Super bright without blinding drivers behind you.
Exactly what I expected and more. Received shorter delivery time than expected to. We will be doing business again.
Hats off to etrailer.com and phone support!
Works as it’s designed. Very low profile and seals well
Loved the light sold the boat but was awesome while I had it
Lights are awesome, nice and bright
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
4/27/2022
Thank you for reaching back out to us. I have sent your information along to our customer service team.