Mounting Pins for Maxtrax MKII Recovery Boards - 11/16" - Qty 4

Video Transcript for Review of Maxtrax Mounting Pins MKII Recovery Boards - MA48PR

Hi, everybody, Andy here with etrailer.com. Let's take a brief look at these mounting pins for your Maxtrax MKII recovery boards. Now, this mounting pin set is going to let you secure two or four Maxtrax MKII recovery boards onto your crossbars or platform rack. And these are gonna be perfect to use with compatible recovery board brackets that mount to your roof rack. And these quick-release pins are going to insert through the pin holes on your boards and then bolt onto your overlanding system. And let me go ahead and remove the hardware here.

You are going to receive four M10 nuts and four washers, and I have that hardware on the bottom of each of these pins. And so, just giving you the measurement of that pin length, as you can see, we're sitting right at 11/16 of an inch. The bolt length rather, 11/16 of an inch. And I'm gonna go ahead and replace the hardware, so I don't lose it. Just like that.

And these are very well built, very durable. The nylon and stainless steel construction is going to be very long lasting, hold up really great to the elements. And the holes on the pins are going to let you secure padlocks, which are sold separately, to deter theft. So when you have your boards in place, like I said, this will hold up to two MKII foot boards or four MKII boards. So when you have a set of four on these pins, you'll just turn this top knuckle here, and then that'll allow you to run a padlock through there.

And if you're only securing two pins, two boards rather, you'll turn two of those knuckles there, and that'll allow you to secure two recovery boards. So these are gonna be very easy to use. And this includes everything that you see here on my table before me. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you.

Again, my name is Andy. Thank you for joining me.