Anderson to MC4 Cable for Redarc Solar Panels - 5' Long

Video Transcript for Review of Redarc RV Solar Panels - Anderson to MC4 Cable - RED33VR

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this five foot long Anderson to MC4 cable for Redarc Solar Panels. Now, this five foot long Anderson connector to MC4 cable connector will connect the Redarc Solar Panel that has the MC4 connectors to the Redarc 10 amp, 20 amp, or 30 amp solar regulators that we do sell separately on our website. The Anderson connector, which is this one right here, provides a nice easy plug and play set up, and the Anderson connectors are common connections for RVs. Redarc uses the industry standard Anderson SB50 connectors across their solar range, and these are a nice high quality Anderson plug, which is simple, fast to connect, no screw terminals, and no risk of poor connections from frayed wires or loose terminals, you just push the connectors in and they lock into place. So for the most part, there's no tools required to connect your solar products together, just plug and play.

Specs on this, again, total length on this is five feet, output voltage is 50 volts DC maximum, current limit is 30 amps, and the wire gauge size they use on this cable is 10 gauge wire. But again, this should be your Anderson connector, and these are your MC4 connectors. But that should do it for the review on the five foot long Andersen to MC4 Cable for Redarc Solar Panels..