Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Replaces the bow-tie bracket, motor, and blade for your Dometic FanTastic roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, FV807350, or 7300 Series).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the replacement fan motor assembly kit for Fantastic Vent Roof Vent Fans. This is going to replace that original vent fan that came with your Fantastic Vent Roof Fan. It's going to have al the same specs as that. It does have the motor already attached with the bowtie bracket on the back. You'll just need to secure that in place on your vent with the screws that came with your kit. There is no hardware that comes with this, so you will have to replace either with the original hardware or pick up some on your own.Has the two wires for your power and ground hookup.
They already come with butt connectors on them, so that's one last step you have to do. This does have to be connected to 12 volt power. As far as the measurements for this fan, from the mounting hole on either side of the bowtie bracket, center on center, that's going to be 11 and a 16th inches from the height of the mounting holes themselves, that's going to be five and 5/16th inches. From the inside edge to inside edge of that bracket, that's going to be 12 and 5/8ths. You can see a little bit better if I hold it in front maybe.
The fan diameter itself, that is going to be 11 and 3/8ths, so that gives you an idea of what that should bit, but it will work with the Fantastic Vent Roof Vans. You can check those part numbers out on our website. This will be a direct replacement from Fantastic Fans, so it should work out well.That's going to do it for our look at the replacement fan motor assembly kit for Fantastic Vent Roof Fans.
Average Customer Rating: 4.7 out of 5 stars (468 Customer Reviews)
Replaces the bow-tie bracket, motor, and blade for your Dometic FanTastic roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, FV807350, or 7300 Series).Haven’t installed it yet but I’m guessing it won’t be an issue. Wasn’t sure if this one deserves a 4 or a 3. Reason is the finish on the plastic is not the same quality as the original fan from Fantastic. The frame section has the flashing that you get sometimes from injection molding. I don’t think it will effect the operation as the fan blade looks fine. I might try to salvage the Fantastic frame and use it again. As I mentioned I have not installed it yet so don’t know if the motor works but I’m sure it will.
I am a repeat customer, the fan I just purchased, I got one last year from this company and they shipped it so fast and it was easy to install and it's been working with no issues so I just bought another one for my other vent. I just got this one installed and it's working perfectly. Their customer service is top notch, they reply to questions very quickly and they ship very quickly. Highly recommend this company.
Works good at first, didn't last as long as expected. Lasted just over a year and died.
Received correct part, installed easily, works perfectly. Thanx.
Next, need to order new screen and vent cover.
Paul H.
7/5/2022
Had been working great since I installed. Definitely would recommend.
Brian D.
7/14/2022
The motor seems MUCH smaller than the original. Just curious if this is the right assembly because Its so different.
Heather A.
7/16/2022
Nice new fan motor assemblies for some pretty old roof vents.
Got the parts in 3 days, etrailer is the place to get your RV parts!
My original Fantastic Fan purchased on Amazon failed after only a couple month. Very disappointing since it was a major installation on my cargo trailer. Fortunately etrailer carries replacement fans. Amazing product inventory for sure. The fan arrived in perfect conditions and was relatively easy to install. Now fingers crossed this one last longer than the original. Fantastic Fans I've had on previous RV's never had a problem.
We are full-time RV'ers, and it's an exact replacement match that's still going strong after a year of daily use.
The motor works well, however the fan blades after a bit of running the fan, cracked and a section broke off. Ducted tape the entire outside of the fan and it seems to still be working well. Would like to find just the replacement fan blade but can't seem to find the part anywhere.
Went right in, works great. We've had nothing but good experiences with etrailer.com
Cathi
9/8/2023
Its been a year and still going strong!
Mike L.
11/1/2023
Good price. Reliable service. Trustworthy seller.
Unit arrived sooner than promised. Installation very easy and done from the top. I removed the large vent cover (7/16" socket) then the four screws on the bow-tie. The old unit lifted out but I had to loosen the black (white) lead on the "vent closed" cutoff switch and move it out of the way. The new unit dropped in, bow-tie holes matched perfectly and after putting in the screws, I cut the wires and used the crimp connectors on the new fan to connect to the fixture wiring. I used cable ties to fasten the leads to the bow-tie arms and to gather excess wiring to keep it out of the way. Tools needed: 7/16" socket to remove and install the hood, #2 phillips screwdriver, wire cutter, knife to trim wire, and plier to crimp connector. See pictures. Fan motor does make a different sound than the original but it works and the old one didn't. The fan itself is also about 1/2" less diameter but that doesn't seem to have made a difference in effectiveness.
Drop in replacement for the original Jan '08 model 8000 Fan-Tastic Vent fan in my Fleetwood class C. Wires were black & red. My coach wires were blue & black. Attached black to black & red to blue and it worked great. Screw holes lined up though the fan diameter was slightly smaller than the original. The old one was white, the new clear.
Easy installation! The fan blade was about a half short in diameter but the bug screen covered it up. A manual didn't come with the shipment. However, Amy from customer service got me all of the information I needed to complete the install. Thanks again and I highly recommend this unit for a Fantastic RV vent fan replacement.
This is the original Atwood equipment, not a copy. I am using it to retrofit into the original vent on a 1967 Airstream Globetrotter. Attached photo is the fitment trial, it should be perfect. I have 1-1/2 inch aluminum angle to make mounting brackets to use the original holes in the Airstream and the fan. Will probably use a radiator mounting kit to install it on springs.
Was able to install into original 1967 vent, by making a mount with some aluminum angle. Quality original fantastic fan part
Easy replacement reasonable price
It was not the item that would work for me . Returned it seemed to be of good quality. Ordered a complete fan instead.
Louise
10/8/2023
Great
Mike L.
10/25/2023
Louise
10/25/2023
Fantastic love it
Online ordering was very easy. Shipped quickly!
Lloyd
12/8/2023
Excellent, no issues constantly in use for a year!
It is a perfect fit but it didn’t work not the new fan but something else is cause. I don’t know why but I think it is possible the board it self. Would order again but I have sold the Motorhome and not my problem.
Product arrived promptly and dropped right in. No issues. Old fan motor was completely worn out after 13 years of near continuous use. Fantastic vent is an excellent product and a must for all RVs in my opinion.
All good - great customer service. prompt delivery and product matches the broken fan element in our van. I look forward to replacing it this weekend. Thanks to eTrailer for all of your help with this replacement job!
Great prices and great shipping
Daniel
12/2/2023
Working perfectly!
Received the “Fan Motor Assembly” and after paying a little over $100 to have it installed, the technician turns it on and the plastic fan blades are warped and it makes an awful scraping sound.
A lot of wasted money on this item!
Very disheartening!
Jenny N.
5/18/2023
I would like to reach out to the manufacturer to see if there are any fixes I can offer. I know that since this is model specific to the FV800800, FV801200, FV801250, FV802250, FV803350, or FV807350 models. Which model do you have?
Easy to install
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Cory
11/28/2023
It’s been a year since the install. It was an easy install and the fan has been working great. No issues noted and I expect to get many years out of it.