Replacement Motor Solution for Fan-Tastic Roof Vent

Question

Question:

my fan tastic vent fan has a motor number model 8100 TS. Do you have a replacement motor for my fan. It is a bowtie style.

asked by: Jeff

0

Expert Reply:

Most likely you need the part # FVK8017-00 which fits most of the Fan-Tastic roof vents, but we don't have just the motor available. Does this match what your motor looks like?

expert reply by: Jameson C

0

Answer 1

What you have is a model 8000 and we do have the correct replacement motor kit, which does come with the fan blade. The part you need is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00.

view full answer...

Answer 2

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 has the same hole spacing as the fan on your 6500 model so it will work. The diameter of the fan is a different than the original but it is the correct…

view full answer...

Answer 3

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 is what you need. It will work with create a breeze and Fan-Tastic Fan models.

view full answer...

Answer 4

Yes it will; I verified for you the correct replacement fan motor is the assembly you asked about, which is the following part number: - Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00

view full answer...

Answer 5

Yes, the Replacement Fan Motor Assembly Kit #FVK8017-00 is the correct motor replacement for your Fan-Tastic 4000BT roof vent.

view full answer...

Answer 6

Although trailer manufacturers do not keep any type of database of every part used in every year, make and model of trailer from your description it does sound like you have the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV803350, which has a thermostat…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 11

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 12

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Replacement Motor Solution for Fan-Tastic Roof Vent

Product Page this Question was Asked From

Continue Researching