Solution for Needing Replacement Fan Blades for Fan-Tastic Roof Vents Assembly

Question

Question:

Am looking for the fan blade only for the Fan-Tastic roof vent as I broke ours trying to remove it for cleaning. I still works but sends a vibration sound out at high speed. Is this available without buying the motor and mount with it?

asked by: David K

0

Expert Reply:

We've had this question before and have checked with Fan-Tastic vents in the past and the only solution for getting a replacement fan blade for their fans is with a new motor assembly like the # FVK8017-00 that you referenced. The blades are not available separately.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! Yes, the Fan-Tastic Replacement Fan Motor Assembly Kit item #FVK8017-00 is the correct part for your Create-a-Breeze model 8000 vent. I confirmed this information with Fan-Tastic vent it is the best replacement.

view full answer...

Answer 2

In order to disable the rain sensor on a Fan-tastic Vent #FV803350 without a remote you can hold the "up/down" button on the unit for 3 seconds as opposed to the remote. You should get a beep or a double beep to confirm the sensor…

view full answer...

Answer 3

I reached out to my contact at Fan-Tastic Vent and the older Fan-Tastic Fan Motor 8100TS you have has been discontinued, but don't worry, the #FVK8017-00 you were looking at is a direct replacement for you. I included a video of the…

view full answer...

Answer 4

The motor of the Replacement Fan Motor Assembly Kit #FVK8017-00 is brushless.

view full answer...

Answer 5

I spoke with my contact at Fan-Tastic Vents and she verified that the part #FVK8017-00 is a replacement for your 4000 can style motor. She said they actually have this listed as a fit in their system so you are good to go!

view full answer...

Answer 6

I do have a solution for you that doesn't involve replacing your entire unit, but the Fan-Tastic Vent Roof Vent #FV803350, does not have a receiver built into it, so it doesn't have the option to operate through a remote. Therefore,…

view full answer...

Answer 7

We do have a large selection of replacement fan motors for RVs available, such as the Fan-Tastic Vent #FVK8017-00. To locate the correct replacement motor, you will want to determine the manufacturer and model of exhaust fan on your T@B Trailer.…

view full answer...

Answer 8

If your Airstream's Dometic powered vent has a visible accumulation of soils from regular use keeping the trailer free of cooking odors then you can certainly clean the fan blade and other accessible surfaces. It sounds like the squeak is coming…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Solution for Needing Replacement Fan Blades for Fan-Tastic Roof Vents Assembly

Product Page this Question was Asked From

Continue Researching