CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
(201 reviews)
Price: $3.30
In Stock
CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
Item # CE10981
Our Price: $3.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (201)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Accessories and Parts - CE10981
- Boat Trailer Parts
- Hardware
- Retaining Ring
- CE Smith
Secure a wobble roller on your boat trailer with the help of this retainer ring. It is constructed of zinc-plated steel to provide years of use.
Features:
- Retainer ring helps you to mount a wobble roller to your boat trailer's roller bunk
- Zinc-plated steel construction is sturdy and long-lasting
- For holding roller on 1-1/8" shaft size and 3/4" shaft size
- Made in USA
Specs:
- Diameter of retainer ring: 3/16"
10981 Zinc-Plated Steel Replacement Wobble Roller Retainer Ring by CE Smith
Video of CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of CE Smith Wobble Roller Retainer Ring - CE10981
Hi, everybody. Andy here with etrailer.com, and today we're gonna take a real quick look at the CE Smith Wobble Roller Retainer Ring. This retainer ring is going to help you mount a wobble roller to your boat trailer's roller bunk. And the zinc plated steel construction is sturdy and long-lasting. And this is designed for holding a roller on a one and one eight inch and three quarter of an inch shaft size. And the diameter of this ring is three 16ths of an inch.
And this ring would need to be installed using a pair of pliers, or any tool that can help you bend the ring into place around that shaft. That's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1 - CE10981
Average Customer Rating: 4.8 out of 5 stars (201 Customer Reviews)
Secure a wobble roller on your boat trailer with the help of this retainer ring. It is constructed of zinc-plated steel to provide years of use.by: 07/23/2021
I had to replace 8 rollers on my boat trailer,the rollers came on time like etrailer said they would and the ones I purchased fits my easy loader trailer perfectly.I pulled one hog ring off,and yes it snapped in half so I got ahold of etrailer again and got the heavy-duty hog rings got them today on time and they worked perfectly,I ordered the hog ring pliers forget buying them they will not work with the heavy rings.I used a vise to bend the rings close to a snug fit the placed them in the holes and used a set of channel locks to finish the job works perfectly, hope this helps other people out. Thank you etrailer associates for your help,will keep you in mind for future orders!
by: Ron 08/04/2022
These retainer rings (hog rings) are a perfect fit for my trailer that has 3/4" rods that the wobble rollers fit on. I searched all over and finally found them on etrailer...where I obviously should have started my search for anything dealing with a boat trailer!
Ron
8/7/2023
The Wobble Roller Retainer Rings bull rings, to me have held up perfectly on the rollers for my sailboat trailer. Great product!
by: Miles 03/15/2024
Very nice retaining rings! Tough as nails. They are really hard to crimp, but when they are on, there is no doubt they are not going anywhere.
by: Alan04/26/2024
I bought everything I needed to rebuild my boat trailer from etrailer and have been very happy with the product and service. Was a successful rebuild, trailered my 18 Ft boat four thousand miles around Florida and back to Massachusetts on a fishing adventure with no issues.
by: Jason 08/18/2023
I love ordering parts from etrailer. I know they are quality parts and exactly what I need.
by: Charles 03/24/2023
These worked well in replace my old boat trailer rollers that were all rusted. Easy to install.
by: Brad 07/01/2023
Delivery was quick and the roller and clips look of very good quality.
by: David10/18/2023
Great product good price
by: Sharon 10/30/2021
Thank you so very much for immediately standing by delivery of our order. Our previous package must have been stolen, as we never received it . When I reported this to your company, I was immediately assured it would be reordered an shipped to me. Package received!!!! Thank you very much. Now we can repair the trailer.
Sharon Nichols
Sharon
10/31/2022
Great
by: Richard 09/08/2023
Got exactly what I ordered in a reasonable time frame
by: Rich F.10/09/2014
Needed these to replace rusted, worn clips on my Sea Lion trailer. Perfect fit, and the videos to help install were very useful. Great customer service too. Parts arrived quickly, and were nicely packed. Thanks etrailer!
Rich F.
10/9/2015
Working as stated after one year, all is good so far
by: Jeremy 04/19/2023
Just what I needed and it was processed and shipped very quickly. I will definitely order from here again with any trailer needs.
by: Patrick 09/17/2018
They are installed and the trailer rollers stayed in place. Service was good and the product was what I expected.
The only issue was getting the right pliers to install the keepers
Patrick
9/17/2019
No problems still working like new
by: Clay07/05/2019
Tried to use these clips but they were impossible to crimp. I was replacing rollers on boat trailer. Not even my channel locks could budge these. Went with axle caps instead. Much easier to use. The reviews for special crimping tool for these got poor reviews overall. You can't really get a good grip with the channel locks because of the overlapping edge of the rollers that get in the way.
by: Peter08/02/2019
Great Prices and selections. Very good correspondence with a slight delay on the order. Very prompt in receiving the order once stock was in. The Wobble wheels and the locks went on well. The replacement locks were of a better quality than what I took off. It caused me to grind the washers a little to make it all fit. It was a quality install, if I say so myself. Keeping Etrailer.com as a go to parts store.
by: Daniel 07/23/2021
I installed these on my boat trailer and they were absolutely perfect for my needs. The rollers are now functioning 100% and I no longer have any rubber roller marks on the boat. A perfect solution to imperfect rollers.
by: Tom08/28/2017
The wobble roller retainer rings should be a must have for anyone with rollers on there trailer. Over time I have replaced almost all my rings ., especially if you use your boat, like me in salt water.
by: Jim09/27/2019
Just finished installation on ez loader trailer,nice fit,easy install.Used to replace 33 year old rollers that were shot.By doing so lifted boat up a couple of inches so it is no longer dangerously close to fenders.Can't comment yet on performance or longetivity but appear to be a decent product.I appreciate the speed with which they arrived,might be able to enjoy a couple more weeks on the water.The hog rings overall were larger than the existing but worked fine on 1" shaft.Thanks
by: Frank05/22/2018
Measured and ordered the parts to replace the rollers on my EZLoader trailer. Shipment showed up super fast and was able to get it done right the first time. There is a helpful video on you tube that shows how to install these rollers. My boat now glides on and off my trailer!
Thank you for the great service!
by: neal wynn09/12/2016
The items I received were exactly what I wanted, being that my boat trailer is 30 yrs old. The rubber rollers were the same exact size as the ones that were 30 yrs old. Also, the shipment arrived way before I was expecting it. I will continue to shop at etrailer.com
by: Jerry09/10/2017
Requires a lot of pressure to install on the Wobbly Roller. I am not sure what tool would have made the installation easier. The angled hog ring pliers were too small.
Jerry
9/12/2018
Great!
by: James07/17/2021
Replacement trailer rollers and parts were exactly as described and arrived as scheduled. I would order again as needed
by: Chris C09/01/2016
This was a replacement for the OEM product placed on my Tidewater trailer. It fit the bill exactly. Shai was very helpful getting the right size roller, washer, and hog clips to ensure that my installation went smoothly. I was in a rush and the 2-day shipping came through as well. Overall a great experience.
by: manyaday07/19/2016
Great item. Fits well. Good price..... What more can I say?
etrailer is the best place to buy boat trailer parts. They offer fast shipping and better prices then [...], that's for sure.
by: Anthony 05/17/2023
Very nice cut of metal. Worked with ease
25
201
Show More Reviews
See what our Experts say about this CE Smith Accessories and Parts
- Can a Wobble Roller on a Boat Trailer Be Held In Place Using Only Retaining RingsA wobble roller retainer ring such as # CE10981 can work to hold the roller in place provided you are using the right size ring for the shaft of the roller. For example # CE10981 will fit a 3/4 inch and 1-1/8 inch shaft. You would want the weight evenly distributed to avoid uneven wear and the potential loss of a roller. The boat itself may not be balanced which could be causing the issue. It is also possible that the trailer itself, not just the rollers, needs to be checked and repaired...
view full answer... - Can a Wobble Roller Retainer be Replaced with a Cotter PinEssentially the Wobble Roller Retainer pin part # CE10981 is a cotter pin. I would recommend using this though as it was designed to fit under a wobble roller. A cotter pin might interfere depending on it's size.
view full answer... - How to Install the CE Smith Wobble Roller Retainer Ring # CE10981Basically, you put the open end around the shaft on each end of the roller then use some pliers to clamp it closed so it is tight to the shaft. This allows the roller to roll but stay in position. I made a video showing what this would look like for you.
view full answer... - What is Diameter of Boat Trailer Roller Retainer Ring and Will It Fit a 1 Inch ShaftThe diameter of the retainer ring # CE10981 is 3/16 inches. Yes, you could use it on a 1 inch shaft as well.
view full answer... - Recommended Installation Hardware for a Wobble RollersThe recommended way to secure wobble roller is to use wobble roller retainers like the CE Smith Wobble Roller Retainer Ring # CE10981. The part # CE10981, can be used for 1-1/8 inch shaft size and 3/4-inch shaft size. You will slide the wobble roller onto the shaft then use the correct size washer for the size shaft you have. Then, you will put the retainer ring around the shaft and squeeze the open ends of the ring around the shaft til it holds the washer and roller to the shaft, but...
view full answer... - Recommendation For Retainer Ring to Hold Wobble Roller to 3/4-Inch ShaftThe CE Smith Wobble Roller Retainer Ring, part # CE10981, can be used for 1-1/8 inch shaft size and 3/4-inch shaft size. You will need to choose the correct size washer along with the retainer ring for installation on your 3/4 -inch shaft. The washer you will need is the CE Smith Wobble Roller Washer for 3/4-Inch Shaft, part # CE10983. You will slide the wobble roller onto the shaft then use the correct size washer for the size shaft you have. Then, you will put the retainer ring around...
view full answer... - Part Needed to Secure Wobble Roller to 5/8 inch ShaftFor a pal nut designed to fit a 5/8 inch shaft you would want the part # CE10801 which will secure to the end of a 5/8 inch shaft. We don't have a retainer ring for that shaft size.
view full answer... - Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981The washer part # SW1000 is 1/8 of an inch thick. The diameter of the CE Smith Wobble Roller Retainer Ring # CE10981 is 3/16 inch.
view full answer... - Are Special Tools Needed to Attach Wobbler Rollers to a Shaft Using Retaining RingsI have tried to use channel locks before and they do not work all that well. You need what are called hog ring pliers such as # PTW88003. These pliers also come with fasteners but for boat trailer rollers you would want to use a retainer ring such as # CE10981 as an example.
view full answer... - Installing/Replacing # DL21562 Rocker Roller On A Boat TrailerNot at all, the procedure is really very simple. You'd use pliers to remove the existing Hog or Retainer Ring, remove the old washer (if present) and remove the existing roller. Install the new roller, replace the # CE10983 washer and install a new # CE10981 retaining ring by slipping it over the shaft and crimping it with pliers. This roller is designed to work on a 3/4 inch diameter shaft.
view full answer... - Are There Different Sized Wobbler Roller Retaining Rings?There are different sized wobbler wheel retaining rings, however we only carry the one size of retaining ring. The CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1 # CE10981. This is designed for holding roller on 1-1/8" shaft size and 3/4" shaft size only. The diameter of this retainer ring is 3/16 inch. This is a fairly standard size and that is why we don't carry others. If you need a washer for this install, I recommend the CE Smith Wobble Roller Washer for 3/4"...
view full answer...
- What Holds Wobble Rollers onto a TrailerThe Yates Wobble Roller # YR440R that you referenced should work well for you since it has the same 3/4 inch shaft as your trailer. Wobble rollers are held on with retainer rings like the CE Smith Wobble Roller Retainer Ring # CE10981. Basically, you put the open end of the retainer ring around the shaft on each end of the roller then use some pliers to clamp it closed so it is tight to the shaft. This allows the roller to roll but stay in position. Basically, the ring has to gently but...
view full answer... - Washer and Pin to Use with the CE Smith Wobble Roller YR440RFor washers to go with the part # YR440R we have the part # CE10983. Wobble rollers are held on with retainer rings like the CE Smith Wobble Roller Retainer Ring # CE10981. This gets clamped so that the holes on your shaft get pinned by the ring.
view full answer... - What is the Inner Width for Yates Ribbed Wobble Roller # YR500YW-6PI went out to the warehouse and pulled Yates boat roller # YR500YW-6P. The inside width where the shaft goes is 1-1/2 inches. I have included a link to a video review of this roller for you. Some related items you may also need are the retainer ring, # CE10981, and roller washer # CE10983.
view full answer... - Boat Trailer Wobble Roller Recommendation to Fit 3/4 inch Diameter ShaftWe have wobble rollers specifically designed for 3/4 inch shafts like yours. For that we have the part # YR343R-6P which has a center hole diameter just slightly under 7/8 inch to fit the 3/4 inch shaft the way it needs to. If you need a washer to go along with it you'd need the part # CE10983 and for a retainer ring part # CE10981.
view full answer... - Washer and Retainer Ring Recommendation for Use with Wobble Roller # YR500YW-8PEZWit the wobble rollers we offer like the part # YR500YW-8PEZ you would want to use the wobble roller washer part # CE10982 and the retainer ring part # CE10981.
view full answer... - How To Install New Wobble Rollers, Washers, And Retaining RingsThe way to install the new # YR343R-6P roller is pretty simple. You'd can use pliers or channel locks to remove the existing retainer ring and the old washer. Then remove the old roller. install the new roller part # YR343R-6P and washer part # CE10983, and install the new retainer ring part # CE10981 by slipping it over the shaft and crimping it with the pliers or channel locks. This roller is designed to work on a 3/4 inch diameter shaft.
view full answer... - Replacement Wobble Roller, Washer, and Retainer Recommendation for 1986 Load Rite TrailerIt sounds like you're needing the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers - TPR - 1-1/8" Shaft # YR500YW-9P along with the Wobble Roller Retainer Ring # CE10981 and Washer # CE10982. Aside from that we unfortunately don't have replacement mounting brackets for the wobble rollers so for that you'll need to visit your local trailer shop to see if that's something they can supply you with. Just be sure whatever parts you end up getting all match up and will fit together - notice...
view full answer... - Hardware Needed for Replacing Wobble Rollers on Boat TrailerThe shafts in your picture do look a bit rusty but most likely they will still work. But you have to inspect them all to make sure they only have surface rust. You'll also need the washer part # CE10982 and the retainer ring part # CE10981 to install the wobble roller part # YR530R-5P you mentioned.
view full answer...
- Are Parts Available for Yates 5 Inch Wobble Rollers?We carry boat trailer hardware though not all parts for the Yates Ribbed Wobble Roller 5" Diameter # YR500YW-6P. We do offer Wobble Roller Washer for 3/4" Shaft # CE10983 and Wobble Roller Retainer Ring # CE10981. I have added a link for you to all of our available boat trailer parts so you can take a look.
view full answer... - New Rollers and Hardware to Replace Yates 530 R RollersYou will want the Yates # YR530R-8P in heavy duty rubber. This wobble roller has a 5 inch diameter and is 3 inches wide. It takes a 1 inch diameter shaft. Bushing length is 1-1/2 inches. Clips like part # CE10981 are crimped on the ends of the shaft to keep the roller in place. We don't carry a washer compatible with a 1 inch diameter shaft. I have linked a video review of the roller for you.
view full answer... - How to Determine Correct Replacement Wobble RollersThank you for the photo and your rollers are definitely worn, and I do recommend replacing them. In order to find the correct wobble rollers, what you'll need to do is measure your current rollers, both the diameter and the width, as well as the diameter of the shaft. For example, the Yates Ribbed Wobble Roller # YR530R-8P measures 5" diameter, is 3" wide, and is designed to fit a 1" shaft. I have added a link below to our entire selection of rollers for you to check out as well.
view full answer...
- Removing Retainer Ring When Replacing Wobble Roller On Boat TrailerTaking the retainer ring like part # CE10981 out when removing a wobble roller can be tricky, particularly when they tend to break. My best recommendation is to use two needle nose pliers if you can get a good grip when removing the ring. You can grab both sides at one time and hopefully not have one end slip inside the roller shaft if it should break.
view full answer... - How to Determine the Correct Yates 500 Roller to Replace a Missing One on a Boat TrailerThere are different Yates 500 rollers available and they typically have different attachment hole diameters. Looking at the pictures you sent in, it looks like you have a cap that feeds through the front of the roller and attaches using a Wobble Roller Retainer Ring # CE10981 to hold that cap onto the shaft. You just need to remove the retainer pin to pull of the cap to the roller and measure the diameter of the hole. Then you just need to get a roller with the same size hole. For example...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
David L
Updated by:
Adele M
Installed by:
Cole B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerold C.
7/24/2022
Everything is in excellent working order!Thanks for your help!!