Replacement Wobble Roller, Washer, and Retainer Recommendation for 1986 Load Rite Trailer
Question:
need two load rite wobble assembly for a 1986 load rite trailer Both are up front, one left, one right. Both are two rollers I wish to replace the entire assembly, not just the roller. Rollers seem to 5 inches in diameter Your form does not seem to allow pictures, but I could send some What should I buy, including any needed hardware? Thanks
asked by: John S
Expert Reply:
It sounds like you're needing the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers - TPR - 1-1/8" Shaft # YR500YW-9P along with the Wobble Roller Retainer Ring # CE10981 and Washer # CE10982.
Aside from that we unfortunately don't have replacement mounting brackets for the wobble rollers so for that you'll need to visit your local trailer shop to see if that's something they can supply you with. Just be sure whatever parts you end up getting all match up and will fit together - notice the 1-1/8" shaft measurement matches for both the wobble roller and the washer.
Products Referenced in This Question
CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Hardware
- Retaining Ring
- CE Smith
more information >
CE Smith Wobble Roller Washer for 1-1/8" Shaft - Zinc-Plated Steel - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Trailer Hitch
- Trailer Suspension Parts
- Weight Distribution Hitch
- Hardware
- 1-1/8 Inch Diameter
- Washers
- CE Smith
more information >
Product Page this Question was Asked From
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/8 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: Replacement Slipper Springs for EZ Loader Trailer with 26-1/4 Inch Springs
- Q&A: Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: Replacement For Dexter DX12.5 Brake Actuator on Boat Trailer
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Boat Trailer Showdown: Bunks vs. Rollers