Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
(18 reviews)
Price: $14.63
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
Item # YR500YW-9P
Our Price: $14.63
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (18)
- Q & A (0)
- Videos (1)
- Photos
Yates Rubber Boat Trailer Parts - YR500YW-9P
- Rollers
- Wobble Roller
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- 3 Inch Wide
- Fits 1-1/8 Inch Shaft
- Yates Rubber
3" Wide wobble roller replaces 1 worn-out roller on your boat trailer's roller bunk. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.
Features:
- Replaces 1 wobble or rocker roller on the roller bunk assembly of your boat trailer
- Provides additional traction thanks to ribbed design
- Great for slick or slimy hulls
- Constructed of thermal-plasticized rubber (TPR)
- Non-marking, non-scratching material
- Stronger and more durable than traditional rubber
- Softer and more pliant than polyurethane
- Made in the USA
Specs:
- Application: roller bunk with 1-1/8" diameter shaft
- Diameter of center hole measures slightly under 1-1/4" to fit 1-1/8" shaft
- Bushing length: 1-1/2"
- Dimensions: 5" diameter x 3" wide
500YW-9P Yates 5" Rib Rocker Roller - Yellow Thermal Plastic Rubber
Video of Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR500YW-9P Review
Today we're going to review part number YR500YW-9P. This is a Yates Ribbed Rubber Roller. This is a 3-inch wide wobble roller that will replace a worn out roller on your boat trailers roller bunk This is constructed of a thermal plastic rubber material, which will normally outlast your traditional rubber rollers and its also a non-marking, non-scratching material which will not mark up the hull of your boat. It is stronger and more durable than your traditional rubber rollers. It is softer and also more pliant than a polyurethane roller. This part is made in the USA.
Now we're going to do a few measurements on it. The width of the roller as we mentioned is three inches. The diameter on this is 5 inches and it is designed to fit on a roller bunk with a 1 1/8-inch diameter shaft. And that should do it for YR500YW-9P.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Wrong item shipped
Customer Reviews
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft - YR500YW-9P
Average Customer Rating: 5.0 out of 5 stars (18 Customer Reviews)
3" Wide wobble roller replaces 1 worn-out roller on your boat trailer's roller bunk. Thermoplastic rubber outlasts traditional rubber and won't mark up your boat. Ribbing provides extra traction for slippery hulls.by: William 02/16/2023
My order arrived promptly, with no issues. I look forward to their installation, come springtime and hopefully some years of good usage.
by: Scott03/16/2024
Great people to talk to when I call,and any problems with wrong items,,,,they're always glad to make it right... thank you all at etrailer...appreciate it
by: Alan 04/26/2024
Worked out great
by: Richard 07/17/2023
Best rollers for a boat trailer ever !!!
by: Jason 08/18/2023
Rollers look and are of great quality.
by: sidney07/05/2014
great service. used to replace black rubber rollers. worked fine
by: Jay B08/11/2014
Good Product easy to install tool less than an hour to replace all 16 rollers on my trailer.
by: Hank S08/05/2016
Product was as ordered, high quality and matched my present equipment. As always E trailer had what I needed and was fast on delivery.
by: Jose R.07/16/2013
Im very happy with the product my boat working very good now. Thanks.
by: Danny10/02/2020
It fit great
by: jim I.10/15/2014
perfect!!! just as desribed, fast deliv ery
by: Michael03/19/2020
Very knowledgeable staff. Gave good advice with prompt service.
by: Jamie D.03/20/2015
Great website, shipping, and product. Very satisfied.
by: John03/30/2019
Right product...right price...fast deli very!w
by: Pauline08/22/2023
by: Mitchell 09/17/2022
by: Richard 08/11/2022
18
18
See what our Experts say about this Yates Rubber Boat Trailer Parts
- Replacement Roller for Yates 530R that Wont Mark Up BoatWe actually have a non-marking version of the Yates 530R roller you have part # YR530R-6P with the part # YR500YW-6P that would work great and would prevent the marking you are worried about.
view full answer... - Recommended Replacement Wobble Roller Parts for Venture Boat TrailerThank you for including a photo of your Venture trailer that is missing some parts that hold its wobble roller in place. It looks like the trailer has one of the Yates non-marking rollers that are shown on the linked page. Based on your 1-1/8-inch diameter I think you have the # YR500YW-9P. We offer the matching washer # CE10982 and retainer ring # CE10981 that you can add to your cart by clicking on the provided links.
view full answer...
- Replacement Wobble Roller, Washer, and Retainer Recommendation for 1986 Load Rite TrailerIt sounds like you're needing the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers - TPR - 1-1/8" Shaft # YR500YW-9P along with the Wobble Roller Retainer Ring # CE10981 and Washer # CE10982. Aside from that we unfortunately don't have replacement mounting brackets for the wobble rollers so for that you'll need to visit your local trailer shop to see if that's something they can supply you with. Just be sure whatever parts you end up getting all match up and will fit together - notice...
view full answer... - Is There a Difference Between Blue and Yellow Non-Marking Wobble RollersGreat question Brandon, so the yellow part # YR500YW-9P and the blue part # YR500BW-9P are both considered non-marking and have great reputations. Mostly people say they are both just as effective as the other so I would feel confident recommending either but it seems people prefer the blue so that is what I would go with.
view full answer... - Wobble Roller Availability for Boat TrailersYes we do offer wobble rollers. For example we have the non-marking Yates Ribbed Wobble Roller # YR500YW-9P which is 5 inches in diameter and has a 1-1/8 inch diameter shaft hole. If you need a different size though check out the link I attached to see all of the ones we carry.
view full answer... - Replacement Yates Blue Roller with 5 Inch Diameter and 3 Inch Width The closest option we have to the measurements listed in your question is with the Yates Ribbed Wobble Roller # YR500BW-9P. This roller has a 5 inch diameter and is 3 inches wide. The dimension that is slightly off from what you mentioned is the center hole diameter, which is just slightly under 1-1/4 inches on this model. It is designed for use with a 1-1/8 inch diameter shaft. This roller does also have "500" embossed on the unit that you can see in the picture I attached. We do not...
view full answer...
- How To Measure Roller Shaft Size For Wobble Roller on 2006 LoadRite Boat TrailerOn the shaft of your LoadRite boat trailer you will want to measure the diameter of the shaft at the widest point, which is probably the top to bottom of the curved part of the shaft. It should measure 1-1/8 inches for the Yates TPR Ribbed Wobble Roller, part # YR500YW-9P, to fit. If you have access to a roller that was on the shaft of the LoadRite boat trailer you will want to measure the diameter of the center hole of the roller and the width and diameter of the roller to help determine...
view full answer... - Replacement Rollers For Wobble Rollers To Eliminate Marks and Gauging In The Boat HullSince your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and more durable than traditional rubber while being softer and more pliant than polyurethane. You will need to find your shaft size to find the correct 5" Rollers. If you have a different size roller let me know what size it is and I can help you...
view full answer...
- How to Determine the Right Replacement Wobble Roller for a 2007 Load Rite Boat TrailerThere are so many different possibilities that we have no way of knowing what size or brand of roller, or really anything, is used on any given trailer. You would have to measure the old wobble roller or the bracket and shaft it goes with, to determine if any of the replacements we carry will fit. Wobble roller # YR500YW-9P for example is 5 inches in diameter, 3 inches wide, and it fits a 1-1/8 inch diameter shaft. I have included a link to the wobble rollers that we carry to the right.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jeff D
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
2/17/2024
Review follow up: Rollers are holding up nicely. Wouldn’t expect much in the way of wear. They make the trailer look good and I don’t have to worry about smudge marks on tge white hull of my boat.