Replacement Mounting Plate for Bulldog Winch Trailer Winch

Video Transcript for Review of Bulldog Winch Replacement Trailer Winch Mounting Plate - BDW65XJ

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Bulldog Winch Replacement Trailer Winch Mounting Plate. This is going to replace the mounting plate for your Bulldog Winch Trailer Winch that you see on the screen there. So if you are needing to replace that original mounting plate, this is going to allow you to mount that Winch and fairly to your trailer deck or frame. If you are needing hardware for this, we do also have the bolts available with the counter sunk heads that will allow you to use the pre-drill to counter sunk holes for a flat deck to get this mounted in place.

This does have a nice steel construction with a powder coat finish. So it is going to be corrosion resistant, will hold up well for you, do a good job. The dimensions here we're right at 16 and one eighth of an inch wide by seven and three eighths of an inch deep by right at three inches tall. You can see we've got a mounting bolt pattern of about six and a half inches, this way by about four and a half inches here. And then our fairlead bolt pattern is going to be right at eight inches from center to center.

So that's going to complete our look for today at this Bulldog Winch Replacement Trailer Winch Mounting Plate. I hope this video has been helpful for you in determining if this is going to work for you. If you have that Bulldog Winch that I showed a moment ago, you can rest assured this is going to be exactly what you need. That's going to complete our look for today. Again, I'm Michael with etrailer.com.

Thanks for watching..