Replacement Air Spring for Air Lift LoadLifter 7500 XL System - Rear Axle - Qty 1
(11 reviews)
Price: $196.12
In Stock
Replacement Air Spring for Air Lift LoadLifter 7500 XL System - Rear Axle - Qty 1
Item # AL50236
Retail:$281.97
Our Price: $196.12
You Save: $85.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Air Lift Accessories and Parts - AL50236
- Vehicle Suspension
- Springs
- Air Spring
- LoadLifter
- Air Lift
This air bag replaces 1 spring in your LoadLifter 57500 XL air suspension system for rear axles.
Features:
- Replaces 1 hybrid spring in your Air Lift LoadLifter 7500 XL air helper spring system for rear axles (AL57538, AL57575, AL57595, AL57596, and AL57599)
- Bellows-type air spring has more volume than LoadLifter 5000 air springs
- Made in the USA
50236 AirLift Load Lifter 7500 XL Replacement Air Bag - Rear Axle
California residents: click here
Video of Replacement Air Spring for Air Lift LoadLifter 7500 XL System - Rear Axle - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Air Lift Vehicle Suspension - AL50236
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement air spring for the Air Lift LoadLifter 7500XL systems. This is for a quantity of one spring. Now this will replace one spring in your Air Lift LoadLifter 7500XL Air Helper Spring System for rear axles. This will work with the kit part numbers AL57538, AL57575, AL57595, AL57596 and the AL57599 All five of those kits we do sell separately on our website. This is a seven-inch diameter air spring, will give you more volume than the LoadLifter 5000 Air Spring for greater leveling strength at lower air pressures.
It is constructed of a two-ply fabric reinforced rubber. The end caps on it are made of a nice high strength zytel nylon which makes it lighter, stronger, and more corrosion resistant than steel. Any adjustable air pressure for the spring is five PSI up to a hundred PSI. Now it will include everything shown here on the table, the air spring itself, the 90 degree elbow right up here, the 90 degree airline connector right up here, and then the hardware for installation. This part is made in the USA, but that should do it for the review on this replacement air spring for the Air Lift LoadLifter 7500XL system..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
Customer Reviews
Replacement Air Spring for Air Lift LoadLifter 7500 XL System - Rear Axle - Qty 1 - AL50236
Average Customer Rating: 4.6 out of 5 stars (11 Customer Reviews)
This air bag replaces 1 spring in your LoadLifter 57500 XL air suspension system for rear axles.by: Robert10/14/2022
Item was right but has a leak
by: Kyle04/13/2022
OEM replacement part at great price. Shipping was extremely fast. Exceeded all my expectations.
by: Brian 01/27/2023
Fast delivery. Exactly what I ordered.
by: Jt08/24/2021
Super fast delivery, no hassle and good price. No complaints!
by: Joseph 07/04/2022
by: James 02/08/2023
by: Filiberto08/26/2023
by: Thomas 09/26/2021
by: Enyilis12/21/2021
by: Alan 10/04/2021
by: Edgar 03/05/2021
11
11
See what our Experts say about this Air Lift Accessories and Parts
- Does The Air Lift LoadLifter 7500 XL Have An Internal Jounce Bumper?Yes, the Replacement Air Spring for Air Lift LoadLifter 7500 XL System # AL50236 does have an internal jounce bumper. This air spring is a replacement hybrid spring for your Air Lift LoadLifter 7500 XL Air Helper Spring System, and is made in the USA. I have also included a product overview video for you to check out as well.
view full answer... - Does Replacement Air Spring for Air Lift LoadLifter 7500 XL System Come as PairHi Bart; the Replacement Air Spring for Air Lift LoadLifter 7500 XL System # AL50236 comes as a single part. If you needed to replace both air springs you'd need to order a quantity of 2.
view full answer... - Do Air Lift Air Springs have Maximum and Minimum Height RangeAir Lift does not rate their bags like the part # AL50236 by max and minimum height. As long as you are using the kit on the vehicle it is designed for and the vehicle isn't overloaded you just have to abide by their pressure range of minimum 5 psi and maximum 100 psi and you don't have to worry about anything else.
view full answer... - What is the Overall Diameter of the Replacement Air Spring for Air Lift LoadLifter 7500 XLI reached out to my contact at AirLift and they were able to tell me that the mounting diameter of the Replacement Air Spring for AirLift 7500XL # AL50236 is 8" wide- so you will need at least 8" of lateral clearance in order to safely mount these air springs on your vehicle. The mounting holes on the bases of the springs are 2.75" apart (center on center). I've attached a photo with these measurements for you as well. If you put your vehicle information into our fit guide, you can find...
view full answer...
- Do The 7500 Air Lift Springs Fit the Same Mounting Brackets as the 5000 Springs?I have an answer for you. Unfortunately, I confirmed with Air Lift that the Replacement Air Spring for Air Lift LoadLifter 7500 XL System # AL50236 has different mounting brackets than the 5000 models. In order to have the correct brackets as well as an even plane for your vehicle, it is recommended that you have the same size springs on both axels. For this route, I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle # AL57589. Without the same size springs on both...
view full answer... - Does The Air Lift LoadLifter 7500 XL Have An Internal JounceYes, the Replacement Air Spring for Air Lift # AL50236 for the Air Lift LoadLifter 7500 XL # AL57538, does have an internal jounce. If you want 6" air springs, you'll want the Air Lift LoadLifter 5000 Air Helper Springs # AL57385. # AL57385 fits a 2015-2020 Ford F-150, so if that's what you have then these will work great for you.
view full answer... - Can I Upgrade the Air Bags in my AirLift 5000 System on 2006 Dodge Ram 3500 to the AirLift 7500 BagsI have a solution for you, but the differences between the AirLift 5000 # AL89295 and AirLift 7500 # AL57595 extend to the brackets and mounting hardware. For that reason you won't just be able to swap out your 5000 air bags with the Replacement Air Spring for Air Lift LoadLifter 7500 XL System - Rear Axle - Qty 1 # AL50236 and you will need to replace the complete system if you're looking to upgrade to the AirLift XL 7500 # AL57595. You should be able to reuse the air lines from your old...
view full answer... - Air Lift Air Bags For Custom Project on 2008 Ford F-450 The Air Lift Air Spring # AL50236 has what they call a design height of 7". There are 3 different height bags (5.5", 6" and 7") and they are determined by the number stamped on the side of the bag. The bags that come in the Air Lift LoadLifter 5000 # AL57347 that is made to fit your 2008 Ford F-450 are 6" design height. Air Lift does produce Spacers in a variety of heights to adjust for trucks that may have lift kit installed. 2" Spacer # AL52420 4" Spacer # AL52440 6" Spacer # AL52420
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Noah M
Written by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
10/27/2022
You mentioned that the spring has a leak and I wanted to ask if you used the soap test to determine where the leak was coming from? Has the leak been repaired?