Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers 16,000 lbs
(0 reviews)
Price: $733.75
In Stock
Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers 16,000 lbs
Item # TTRA5602
Retail:$863.24
Our Price: $733.75
You Save: $129.49
In Stock
Need help with installation?
Locate installers near me- All Info
- Q & A (0)
- Photos
Timbren Trailer Leaf Spring Suspension - TTRA5602
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Single Axle
- 16000 lbs
- Rubber Springs
- Timbren
Designed for heavy-duty highway trailers. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while also absorbing road shock. Sway is reduced and trailer tracking behind the vehicle is improved.
Features:
- Improves suspension, handling and safety
- Provides additional support as needed so you always have a smooth, comfortable ride
- Allows the leaf spring ample movement while cushioning light loads
- Becomes more rigid as more weight is added
- Increases stability providing great performance while hauling heavy loads
- Raises trailer ride height
- Works independently side-to-side
- Helps compensate for off-center loads
- Reduces body roll when swerving and turning corners
- Works to eliminate trailer sway
- Acts as shock absorbers, taking the brunt of bumps and rough roads
- Extends the life of your trailer's suspension
Specs:
- Application: typically used on heavy-duty highway trailers
- For tandem axle applications, use 2 kits
- Designed to work with a suspension system that is in good working order
- 2 Hollow rubber springs, mounting brackets and hardware are included
- Installs directly onto frame
- Welding and drilling required for installation
- Capacity: 16,000 lbs
- Do not exceed the trailer's weight-carrying capacity
- Spring Dimensions:
- No load: 7-3/8" tall x 5-7/16" diameter
- Loaded: 2-15/16" tall x 8-7/8" diameter
- Limited lifetime warranty satisfaction guarantee
The resistance from Timbren's Suspension Enhancement System works with the trailer's suspension to keep it level, which improves driving performance for your vehicle. When hauling heavy loads, you will often see the rear of the vehicle sag, while the front end raises up. In this case, the rear axle is handling not only the weight of the cargo, but more of the vehicle's weight as well. Since less weight is on the front axle, the front tires are making significantly less contact with the road, reducing traction, which decreases the vehicle's steering and stopping performance.
The Timbren system has a custom bracket that will be bolted onto the trailer frame above the axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits one inch above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape provides increased resistance, stiffening the suspension and keeping the trailer level.
Each hollow rubber spring works independently to support the driver's or passenger's side of the trailer. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when hauling off-center loads.
Timbren Suspension systems help compensate for all of the probable causes of trailer sway from unbalanced loads to gusts of wind from passing vehicles. Installing Timbren will make your trailer track better behind your vehicle and provide a safer more comfortable towing experience.
When hauling heavy loads, the resistance from Timbren's hollow rubber springs will work with the trailer's suspension to raise the trailer's ride height. This is will take additional strain off of the hitch components and help the trailer ride easier.
TRA5602 Trailer Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren
Installation Details
Customer Satisfaction Score:
62% were satisfied with this product
38% of customers were not satisfied
- Wrong item was ordered
0
0
See what our Experts say about this Timbren Trailer Leaf Spring Suspension
- Timbren Suspension Kit to Help Stabilize 8,000 lb Trailer Yes the Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers # TTRA5602 would help stabilize the suspension of a trailer, but since your travel trailer weighs 8,000 lbs this would be too harsh since this is for a 16,000 lb axle. Instead you'd want the part # TTRA1032 which is more appropriately rated for your trailer.
view full answer... - Install Instructions for Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers TTRA5602I attached a link to this page that has the install instructions for the Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers # TTRA5602 for you to check out.
view full answer... - Shock Absorber for 40 Foot 15 Ton Flatbed TrailerFor that 30,000 lb trailer, the only suspension enhancement we carry to assist is the Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers 16,000 lbs # TTRA5602. These are made for heavy duty highway trailers and you will want 2 kits. These rubber springs sit above the axle helping to stabilize and level the load while helping absorb road shock. These will work well for your 40 foot flatbed.
view full answer...
- Suspension Enhancement Option For Gooseneck Trailer With 12,000 lb Tandem AxlesWhile there isn't an air ride suspension upgrade for your gooseneck with tandem 12,000 lb axles, and the SumoSprings with a 5k rating would get smooshed under such a heavy load, there is one option, from Timbren: - Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers # TTRA5602 This kit has a weight rating of 16,000 lbs, so you'd want one for each set of axles. It'll help cushion the load and provide added stability for the trailer, helping with sway and particularly with...
view full answer... - Lift Kit for 2019 Ridgeland 5th Wheel to Gain Height for Towing Trailer LevelYou could use the Correct Track Tandem Axle Trailer Lift Kit part # RR23QX which would give your 2019 Ridgeland a lift of either 1-1/4 inch or 2-1/4 inches.
view full answer... - Suspension Enhancement Recommendation For 16,000 Pound TrailerThe best solution for the type of spring you want on your size trailer is the Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers # TTRA5602. These springs will work the same way as the Timbren springs on your truck, absorbing road shocks and helping provide load support. Timbren springs help reduce body roll and trailer sway caused by unbalanced loads. The load capacity of these springs is 16,000 pounds. This system will require welding to be installed on your trailer....
view full answer... - Will Timbren Kit for Trailer Suspension Work Like Air RideThe Timbren kit part # TTRA5602 that you referenced is designed to give additional support to trailer suspension but it would not perform anything like air ride suspension. If anything it might make the ride quality a bit harsher since the suspension would be stiffer. This kit would be if you were hauling heavy and near the capacity of your trailer and wanted more support.
view full answer... - How Much Air Pressure Should Be Run in a Ultra-Fab TrailAir Air Ride 5th Wheel King PinAccording to Ultra Fab there are many factors that can effect air pressure such as the size of the air spring in diameter and height, the pin weight of the trailer, the mechanics of each individual hitch, altitude and air temperature. Ultra Fab has stated that usable air pressures can range from 20 to 120 psi. Therefore a specific air pressure is not recommended. Instead it is recommended to inflate the air bag to maintain a ride height. To determine the ride height Ultra Fab has indicated...
view full answer...
- Suspension Enhancement for a Coachmen Motorhome Built on a Ford F-53 ChassisI do have an option for you, but suspension enhancement systems are specific fits. The Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers # TTRA5602 is designed for use on trailers. From what I could find on your Coachmen Pursuit, it is built on the Ford F-53 chassis. A Timbren suspension enhancement system that is a confirmed fit for the Ford F-53 chassis is the Timbren Front Suspension Enhancement System # TFFF53B for the front and the Timbren Rear Suspension Enhancement...
view full answer... - 5th Wheel Trailer Pulls to the Right After Making Right Hand TurnsIt is possible that the trailer is heavier on the one side causing the suspension components to wear unevenly. I recommend inspecting the suspension and look for signs of excessive wear such as egg-shaped holes, flat springs, broken parts, and anything out of the ordinary. When replacing suspension parts you should do both sides of the trailer at the same time so that they wear more evenly. Something that will help the suspension to last longer is to install some helper springs. We have...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Brian B
Updated by:
Mary K
Updated by:
Wilson B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.