WesBarg 7 Way RV Style Connector Installation Video

If the junction box is 2-1/2 feet back from the front of the trailer then that would leave just 3-1/2 feet of the coiled cable #WG54006-043 to go from the front of the trailer to the vehicle and still have slack to make turns. That might not be…

The Bargman 7-Way Molded Trailer Wire Connector #H20043 is 4 feet long. We also have the coiled 6 foot #WG54006-043 and the coiled 12 foot #WG54006-046 if you prefer a coiled cord.

There is a "color" chart for the Tekonsha Bargman 7-Way Connector with Coiled Cable, Item #WG54006-046, that is below: White--Ground Red--Left Turn and Brake Brown--Right Turn and Brake Green--Tail Lights Blue--Brake Power Black--12…

Best option would be the Bargman 7-way part #WG54006-046 which has a molded 7-way on one end and then unconnected wires on the other. You could then wire this to the part #PK11604 based on the pinout that you need.

It sounds to me like you are experiencing the hyperflashing phenomenon that can occur with LED lights. In this case I recommend wiring in load resistors, like part #ALEDRST1B, to the left turn, right turn, and running light circuits of your trailer.…

The BOLT Trailer Hitch Receiver Lock part #BL7023582 is correct for your 2019 GMC Sierra 2500 Denali. I spoke with the manufacturer to confirm this. I have also attached a review video for you as well.

I do have something that will work for you. The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long, part #A10-7W6, is the same style 7-way cord as the Hopkins 7-Way RV Style Connector w/ Molded Cable and LED Test…

There isn't really a lot of differences between the Hopkins 7-Way RV Style Connector with Molded Cable - 8' Long - RV Standard #H20046 and Hopkins 7-Way Blade Style Connector with Molded Cable - 8' Long - Auto Standard #HM20041. Both are…

You can wire the Hopkins 7 Way Molded Trailer Plug #HM20048 in whichever manner you see fit- the colored wires in the loom are color coded to make it easy for you to know which pin/blade they're connected to, so you shouldn't need to…

The diagram you attached shows a 7-way wired up in what is considered the "traditional way." If you check out the chart I attached you will see the three ways (really only 2), that a 7-way can be wired. The Featherlite is wired up like the…

The Optronics Flush Mount Grommet for #AL91AB Series Trailer Clearance and Side Marker Lights #A91GB, will fit a hole that measures 2-7/8 inches across and 1-1/2 inches tall.

I attached a picture that shows the dimensions of the JIF winch #315-W2500D as well as another picture that shows the overall dimensions of the jack.