Customers compare RP66558 to these similar products
Products Featured in this Video
Today, we're going to be taking a look a the Reese Light Duty Distribution System with sway control. With a six thousand pound gross trailer weight, in a six hundred pound tongue weight, part number RP66558. It's also available in a four thousand pound gross trailer weight and a four hundred pound tongue weight, part number 66557. You've decided you need a weight distribution system. The Reese… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The weight distribution system that has the best sway control and is properly rated for your tongue weight that will be between 450 and 500 lbs is the Reese Strait Line part #RP66083. This would be my first pick as your best option as it has a tongue…
view full answer...I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…
view full answer...For a weight distribution system, there are always exceptions,but in general the systems with only bars and chains do not have sway control. They are adjustable in tension for different weight, but are a little more work. The bar systems whether…
view full answer...When using the Curt TruTrack Weight Distribution System w/ Sway Control #C17499, which is a great system for your trailer weight and vehicle, you will initially setup your system just like you would a ball mount. So you will measure from level ground…
view full answer...For your Forest River Rockwood A212HW, we have the Classic Accessories PolyPro III Deluxe RV Cover #CA80043. The Classic Accessories PolyPro III Deluxe RV Cover #CA80043 fits pop-up campers that are between 18' - 20' long (this length does…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
view full answer...For a loaded tongue weight of 565 lb the Reese Steadi Flex kit part #RP66558 would be properly rated and would work great.
view full answer...Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
view full answer...What's going to help the most for the sway and bouncing you are experiencing is to have the trailer sitting as level as possible while it is being towed and having as much of the weight of the cargo in your trailer moved to the front of the…
view full answer...With the use of a cargo carrier a transmission cooler is not normally used, but a cooler will prolong the life of a transmission towing or not so it's a great idea for your 2014 Honda Odyssey. We installed the Derale part #D13502 on a 2014 Honda…
view full answer...We have all the parts you will need to tow a small popup camper with your 2015 Honda Odyssey. The trailer hitches for your vehicle are rated for 3,500 pounds but you have to go by what the manufacturer states for your vehicle. If Honda states the…
view full answer...I spoke with Hidden Hitch and you are correct:Hidden Hitch part #70737 was obsoleted in 2009 and replaced with Draw-Tite part #75270. Draw-Tite part #75270 is form/fit/functionally the same as part #70737. There are a few aesthetic differences…
view full answer...