Curt TruTrack Weight Distribution System Setup
Question:
I have the Curt 17500. Single axle TT. 4000# fully loaded. 2010 Ram 1500. 1250# payload, 9950# max towing. In watching several videos on the correct setup procedure, I have seen a wide variance in the advice as to how high to initially set the ball over the level-height of the trailer ball coupler. One said 1/8inch for every 100# of estimated tongue weightinch between 1/2inch and 3/4 and one said 3 inches! Please tell me the correct way to set the ball height relative to my trailers coupler. I want to do it right and DIY... Thanks!
asked by: John C
Expert Reply:
When using the Curt TruTrack Weight Distribution System w/ Sway Control # C17499, which is a great system for your trailer weight and vehicle, you will initially setup your system just like you would a ball mount. So you will measure from level ground to the bottom of your trailer coupler when the trailer is sitting level to the ground. Then you will adjust the hitch ball height on your trailer to correspond to that measurement at the base of the platform the hitch ball rests on. I've attached an article to assist as well as installation instructions for the TruTrack.
When you add the trailer weight to the ball it will drop the back end of your truck, but when you apply the spring bars to the brackets it should bring it back to level. You may need to make some adjustments with the initial fit to ensure you have level transport of both your truck and trailer with the system engaged. Once you have found the correct fit, it makes each time you connect the system extremely easy.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Video: Curt Weight Distribution - WD With Sway Control - C17499 Review
- Video: Review of Reese Weight Distribution - WD With Sway Control - RP66073
- Shop: Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 8K GTW, 800 lbs TW
- Shop: 1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Q&A: What is Ideal Tongue Weight for Use with Curt Weight Distribution System # C17499
- Shop: Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Shop: Brake Controller
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Search Results: rp54970
- Q&A: Differences Between Friction Based Sway Control and Dual Cam System For a Trail-Bay Travel Trailer
- Q&A: Recommended Weight Distribution System for 2021 Jayco Jay Feather X23B
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2020 Ram 1500
- Q&A: Recommended Torque for Tightening Curt Hitch Balls to Ball Mount
- Video: Blue Ox TrackPro Weight Distribution with Sway Control Review BLU67FR
- Search Results: torque wrench
- Q&A: How to Set the Bracket Height on the Curt TruTrack Weight Distribution System Part # C17499
- Article: Brake Controller Installation: Starting from Scratch
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Q&A: Where to Install the Mounting Brackets of the Curt TruTrack # C17499 Compared to the Hitch Ball
- Q&A: Hitch Ball to Use with Curt Weight Distribution System # C17499
- Video: Review of CURT Weight Distribution 2 Inch Shank - 17120
- Video: Choosing the Right Brake Controller
- Search Results: tire minder
- Search Results: tmps
- Search Results: rp66558
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: load leveler bars
on Weight Distribution Hitch
