Customers compare STL42RB to these similar products
Products Featured in this Video
Shane: Hi. I'm Shane with etrailer.com. Today, I'm going to walk through how to install Optronics Round LED Tail Lights. It's going to be five and a half inch round light. It's going to be submersible, so it's going to be sealed. So you can see here, we have it on a cattle trailer.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
What you are describing is normally the result one 1 of 3 issues: First, there could be some corrosion in or on the connectors on the vehicle or trailer side or both. Second there could be a bad ground. Bad grounds can cause all sorts of bizarre…
view full answer...For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…
view full answer...At first glance the picture does imply that it needs a 3-prong plug, but if you look closely there are only wires coming from two of the terminals. And the 2-prong plug like part #A45CB will fit in this setup as the two prongs of the pigtail will…
view full answer...Since you said you have a 7-way blade connector on your Silverado I would start with the 7-Way Molded Trailer Wire Connector, part #H20046. This is an 8 ft long harness with the 7-way trailer connector. If you need a shorter harness, you can check…
view full answer...Intermittent trailer wiring function is almost always caused by either corrosion or in your case an adapter that is not seating properly. What you'll need to do is inspect the trailer wiring connections and clean off all corrosion you find and…
view full answer...Yes our Progressive Dynamics Converter part #PD4135K is the same as the Progressive Dynamics PD4135KW2BV Lithium Power Control Center you mentioned wanting. This has the lithium charging profile that uses the higher voltage charging.
view full answer...The Peterson LumenX LED Trailer Tail Light #M824R-7 comes as a single light fixture, not in a pair. You will also need the 3 wire Pigtail for Peterson Trailer Lights #431-491 to install this light.
view full answer...Are you sure about the 165/80-13 tire size? I don't show that as a currently available tire size, could you have meant a 185/80-13? In any event, a 175/80-13 tire measures 24 inches tall x 6.9 inches wide which would be slightly shorter at about…
view full answer...We likely have an option for you to replace your trailer's tack room lock, but there are no specific replacement parts for your trailer, and we don't have a way of looking anything up, so the best we can do is offer you a way to choose your…
view full answer...I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light #STL22RB is a great option for an LED upgrade. These lights use pigtail #A47PB and will fit the mounts…
view full answer...A great choice for your boat trailer is the LED Trailer Light Kit for Trailers Over 80" Wide #TL16RK. This kit includes 2 tail lights which serve 8 functions (Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and…
view full answer...You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…
view full answer...