Mighty Cord 7-Way RV Style to 5-Way Flat Trailer Connector Adapter Review Video

The Kodiak Dacromet Disc Brake Conversion Kit, item #K2HR35D, would be a good choice for conversion to disc brakes on your boat trailer. We have not had the opportunity to do a video installation for the disc brake conversion yet, but I will go…

From the pictures you provided, you have a UFP DB-42 disc brake set up on your 2008 Trail-Rite. This isn't something we carry, but it looks like these systems use the #L68149 inner bearing and the #L44649 bearing, so you do have a common spindle…

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

The #HM47200 would indeed adapt your existing 4 pole to a 7-way blade-style trailer connector. In that respect, it would work just fine. However, I typically recommend going with the #37185 instead, as the adapter also offers a 4-pole connector. If…

There is a kit available for you to wire in your electric brake controller. Since you already have a 4-way as well as the Hopkins Adapter #HM47200 you will need the Wiring Kit for Electric Trailer Brake Controllers #5506; I've added links to…

I was unable to find your order number to determine the adapter you purchased from us so let's start with the correct one that you need, which is the Hopkins Endurance Quick-Install Trailer Connector Adapter - 4-Way Flat to 7-Blade #HM47200. All…

The 4-way and the 7-way sides of the 7- and 4-Pole Trailer Connector Socket #HM40975 are both active at the same time but you'd most likely find that accessing both connectors at the same time would be challenging due to the lid design of the…

The Hopkins Endurance Quick-Install Trailer Connector Adapter - 4-Way Flat to 7-Blade Item #HM47200 does have a white ground wire going to the 4-way flat connection. The contrast on the photo may be hard to differentiate on your screen or mobile…

That's a good question, and when installed correctly, the lights will be on when the vehicle's circuit is functioning properly for the Adapter 4 Way to 7-Blade RV Connector w/Test Lamps #C96KR. The test light does NOT indicate there is any…

I recommend using the Demco Hydraulic Brake Actuator #DM72VR with the Reverse Lockout Solenoid #DM11993. This solenoid will require you to have a 5-Way Flat Trailer Connector #HM47910 on your trailer. This solenoid will become activated when your…

I reached out to my contact at Tekonsha and for your 2021 Ford F-150 XL with the 4-way connector installed you will need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118283 which will plug into the factory connector near your spare…

Yes that very well may be causing your trailer to act funky. Usually when this occurs it has to do with solenoid on the reverse lockout not getting voltage. Sometimes this can be attributed from a corroded connector or your wiring has become damaged.…