Hopkins Multi-Tow Trailer Connector Adapter Review Video

There is a 5th wheel wiring harness for your 2020 Chevy Silverado that was designed to fit perfectly in the factory cut out in your truck bed. The harness you need is the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #HM54FR. I…

WeatherTech does have mudflaps that fit your 2023 Chevy Suburban RST with the part #WT73XJ which is a front and back set. This set fits the versions of your vehicle that do not have the power assist retractable steps whereas the part #WT32TJ is for…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

The Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless, #C6304, is sold as a kit only.

Yes, the 7-Way to 4-Way/5-Way Trailer Adapter #C35FR can be used with trailers that have LED and incandescent lights. There will be no need for an additional adapter for your 2014 Porsche Cayenne.

It is pretty common for new vehicles to have issues with registering that a trailer with LED lights is connected due to the power draw being so much less than the computer on your 2021 GMC Sierra 1500 is expecting to see. What you need is the 7-Way…

I recommend taking a look at the Malone TradeSport Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs #MAL55VR. This is a very affordable setup that clamps onto the bed rails of your 2018 Nissan Frontier, as long as it is crew cab 5 or 6 foot…

I am not totally sure what power connections your cooler has but we do have a 7-way to 12 volt power outlet adapter with the part #PK11896 that you could use as this plugs into a 7-way that has an active 12 volt power circuit and provides an outlet…

Typically a 4 Flat plug will not have a lead that goes to a battery as the White wire is the Ground, The Yellow is Left Turn/Brake, Green in Right Turn/Brake, and Brown is Running Lights. If you were using this for a different application, you can…

The 12V wire at the vehicle-end trailer connector being hot even when the truck is off can vary depending on the application. For all aftermarket hardwiring installations of a 7-Way wiring harness, the 12V wire will be hot at all times, even when the…

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…