Lippert Scissor Stabilizer Jacks with Handle Review Video

The formula you used is only a guess and wouldn't be an accurate way to determine your trailer's actual pin weight since it's a triple axle toy hauler. The only way to get an accurate number would be to measure at highway weigh station.…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

If you plan on always having same air pressure in both bags I would also go with a union tee like the #AL21838 which will allow you to have both bags at same pressure with a single inflation valve. Otherwise the kit does not come with this so…

The Ultra-Fab Ultra Scissor Jacks #UF48-979031 that you referenced can be used for leveling and stabilization. They have a support capacity per jack of 6,500 lbs and as long as you aren't trying to lift the wheels of the RV off the ground…

The Scissor Stabilizer Jack #TJSC-24, which also comes in a 2-pack #TJSCHD-24 and a 4-pack #TJSCHD-24-4, is a universal fit so you would need to double check our measurements to ensure they fit your travel trailer. When they are collapsed they…

I spoke with my contact in the Tech Services department at Air Lift, and was told that if your lift is actually 6 inches, you would indeed need the 52465 angled spacers which we offer as part #AL79GV. My Air Lift representative suggested that you…

The air bags for that work with your 2012 Ram 1500 are the Air Lift LoadLifter 5000 Air Helper Springs #AL57365, though you will need to measure to ensure that you have the right amount of space to use air bags. To do this, measure from your jounce…

Ultra-Fab Stabilizer Jack #UF39-941707 will bolt onto a trailer using the bolt holes that are present on the mounting flanges of this jack as well as with the included nuts and bolts. You will most likely have to drill holes in the frame of your…

The measurement you will need is from the outside of the frame. The Ultra-Fab Power Twin II Stabilizers #UF39-941707 can be adjusted between 48-77 inches wide. The mounting brackets will sit under the frame with the outside of the angled metal…

If your 2012 Jeep Wrangler Unlimited came with a 4-Way you will need to use 4 and 7 way installation kit #ETBC7. This is a hardwire installation but it does come with everything you will need for the installation. I have included some links that will…

I would be happy to help you find the correct replacement stabilizing jacks for your 2019 Forest River R-Pod 176 but unfortunately we do not have a break down of the specific components your trailer uses. The Scissor Stabilizer Jack #TJSC-24 you were…

If you want to just add on some sort of extension you can use Safety Chain Quick Link #C82932 which has a working load limit of 3300-lbs. This will give you about 3-inches additional length. Ideally trailer safety chains will be one continuous chain,…