Gen-Y Torsion 2-Ball Mount Review GY79FR Video

Yes, the Voyager Camera Adaptor #31300006 is meant to be installed to 12v power. You'll want to plug the white & yellow RCA plugs into your radio, the red wire to 12v power, and the black wire to a ground.

Sounds like you have a system like the Voyager RV Observation Camera System w/ Monitor and Mount #VOM43HDCL1B. I attached our review video of this system which explains the different features, wiring harnesses, and shows how the system looks…

I prefer the Furrion AC units over the Advent Air ones as they tend to blow colder air. For a single unit I'd go with the 15k BTU part #FR58PR which is for non-ducted applications like your enclosed trailer.

Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.

The Demco #DM15851-76 Spare Tire Carrier you'd looked at wouldn't work for you, as the mounting plate for the tire wouldn't fit inside the wheel. I'd recommend using a simple U-bolt style locking spare tire carrier like #FETCLB0201.…

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

You should really attach E-Track directly to the wood floor of the trailer by trimming the rubber covering in the area you want to mount the track. Also I recommend using several E-track backing plates, #e96RR, under the wood floor so that the force…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A trailer hitch receiver can not be modified to increase the maximum tongue weight rating of the trailer hitch receiver. Modifying the receiver will void the manufacturer warranty and could cause a safety issue. For example the Curt Trailer Hitch…

It is not extremely uncommon for the hitch pin hole on a trailer hitch receiver to become oblong after frequent usage. This is usually attributed to frequent back and forth movement of the shank inside the receiver tube opening that in time will…

The overall length of the #325-GH-0352 is 7.563". The distance from the hitch pin hole to the adjustment holes is 4.5" and all the way to the end past the holes is 5.5". I have attached the dimensional drawing below for your…

Yes, you can definitely cut out parts of the BedRug Custom Full Truck Bed Liner so that you have access to the puck system for 5th wheel towing with your 2013 Ford F-350. The correct BedRug for your pickup depends on the following specs for your…