Gen-Y Torsion 2-Ball Mount - 2-1/2" Hitch - 2-1/2" Rise/7-1/2" Drop - 16K

Gen-Y Hitch Trailer Hitch Ball Mount - 325-GH-1125

Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included.

Features:

• Adjustable ball mount lets you hook up your trailer to your tow vehicle
  • Shank slides into hitch receiver on your vehicle
  • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
• 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
• Shock-absorbing design ensures a smooth, steady ride
  • Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa
  • No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions
• Adjustable height lets you tow trailers of different heights with the same vehicle
  • Drop ball mount lower or raise it higher to match your application
• Tongue weight scale is built in to help you balance your trailer
  • Meter lets you know if your load needs to be adjusted before you tow
• Heavy-duty steel construction
• Zinc primer and powder coat finishes resist corrosion
• Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
• SAE J684 certified
• Made in the USA

Specs:

• Application: 2-1/2" x 2-1/2" trailer hitch receivers
• Built-in receiver size: 2" x 2"
• Maximum drop: 7-1/2"
• Maximum rise: 2-1/2"
• 2" Ball capacity:
  • Gross towing weight: 12,000 lbs
  • Maximum tongue weight: 1,500 lbs
• 2-5/16" Ball capacity:
  • Gross towing weight: 16,000 lbs
  • Maximum tongue weight: 2,000 lbs
• Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs
• Overall height: 13-1/4"
• Total from center of 5/8" pin hole with included ball mount installed: 16-1/2"
  • Total length from center of 5/8" pin hole without ball mount installed: 13-1/2"
• Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-1/2"
• Hitch pin hole diameter: 5/8"
  • Distance between pin holes on shank: 1"
• Accessory pin hole diameter: 5/8"
• 10-Year limited warranty

This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory. This lets you easily adjust the height of the included ball mount, or any other accessory you choose to use. This mount also has built-in shock absorption to ensure a safe, smooth towing experience. Using technology similar to that found in torsion trailer axles, the Gen-Y mount absorbs road shock, isolating any rough jarring or chucking at the connection point. This prevents the rough motion from transferring from the vehicle to the trailer and vice versa.

Built-In Shock Absorption for a Smooth Ride

Driving over bumps, potholes, and uneven terrain causes road shock, which can result in a rough, bumpy ride and even potentially damage your vehicle or trailer. This Gen-Y Hitch torsion mount is designed to absorb road shock at the connection point to create a safe, smooth ride. This is thanks to the internal construction of the mount, which is similar to that of a torsion axle.

Pivot points are built into the Gen-Y mount. This allows for movement between the base, which slides into your vehicle's trailer hitch, and the stacked receivers, which provide the connection point for your trailer. When your trailer hits a bump, the stacked receiver portion of the mount will move up or down accordingly.

Built into the Gen-Y mount are tubes with inner bars that are surrounded by rubber cords. As the receivers rise or fall, these inner bars twist inside of the tubes, attempting to follow the receivers' motion. But the rubber cords prevent the bars from twisting too far. And as each bar turns, these cords compress to absorb the shock. This means that any shock experienced by your truck can be absorbed before it reaches your trailer, and the shock experienced by your trailer won't get transferred to your truck.

This type of shock-absorption system is easy to maintain. Just regularly apply grease to the built-in zerk to keep the components in working condition. No airbags to fill. No small parts to repair or replace. No hassle.

Multiple Stacked Receivers for Easy Adjustment

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.

Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.

With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.

Easily Check Your Tongue Weight

This mount features a built-in mechanical tongue weight scale. The red section on the top of the scale indicates your maximum tongue weight (1,700 lbs). The red section on the bottom of the scale indicates no tongue weight (0 lbs). A tongue weight of at least 1,200 lbs is recommended for the built-in shock absorption to function effectively. This means that the scale's white indicator marker should be in the green section when you hook up your trailer to tow.

GH-1125 GenY Hitch Adjustable Torsion Drop Hitch with Pintle Lock for 2-1/2" Hitch Receivers - 2-1/2" Rise/7-1/2" Drop - 16,000 lbs