Fulton Hi-Mount Spare Tire Carrier Review FHDSTC0101 Video

I was able to track down some measurements for the 90 degree uprights that are included with the #CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance -…

I measured the u-bolts in the Fulton Hi-Mount Spare Tire Carrier #FHDSTC0101 and found them to have the following dimensions which I have noted on the linked photo. Overall length 6-1/2-in. Inside width 2-in. Outside width 2-5/8-in. Material…

The Demco #DM15851-76 has 1/2" x 1-1/4" grade 5 bolt with fine threads (.50NF) so you'll want to use 1/2" nuts with a fine thread to secure your tires. There's also a silver version of the carrier using…

The mounting surface of the Fulton Hi-Mount Spare Tire Carrier #FHDSTC0101 will be 7 inches away from the trailer frame it is installed on and the mounting bolts of the carrier will be 4-3/4 inches above the top of the trailer frame.

For a spare tire carrier that will accommodate a spare tire with a 5 on 5 inch bolt pattern you could use a Trailer Spare Tire Carrier #DL22128. If you are interested in a hitch mounted spare tire carrier for a 2x2 hitch shank I recommend Curt…

The Demco Spare Tire Carrier for up to 4" Trailer Tongue - Silver #DM15851-52 only comes with the trailer installation mounting hardware. The carrier does not come with the hardware to mount your spare tire on the carrier. This includes…

If the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM10140 and the 12" Aluminum Wheel #LH45FR with 5 on 4-1/2" bolt pattern matches up with what you have now, then it will be a direct fit replacement. If it does not, then you will…

I checked with my contact over at Demco and they say that the 1/2" bolts on the Demco Spare Tire Carrier for up to 4" Trailer Tongue - Silver #DM15851-52 should be torqued to 75-ft/lbs.

For a spare tire and wheel on your 2023 Coleman Lantern 17B use the Karrier ST215/75R14 Radial Trailer Tire - 5 on 4-1/2 - Load Range C - Galvanized Wheel #AM32182 or White Wheel #AM32181.

The Fulton Hi Mount part #FHDSTC0101 would be a great solution as it has the capacity for your 55 lb spare and is compatible with 6 lug trailer wheels.

The CE Smith Bunk Board Guide-On Kit, part #CE27600K75 includes everything necessary to install bunks up to 12 feet long, including the 70° posts, carpet, brackets and mounting hardware. The mounting hardware is compatible with frame members up…

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like you…